PGT Construction in Broadmoor, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

PGT Construction in Broadmoor, CA | Daly City Construction

We provide independent PGT window and door service throughout Broadmoor, handling everything from single-unit replacements to whole-home impact window retrofits. The difference here is that we know how PGT products actually perform against the fog, salt air, and slab foundations that define this neighborhood, not just what the spec sheet says. If you’re dealing with a sticking WinGuard slider or fogged glazing on a 1950s tract home, call (866) 505-5254 and tell us what the house is doing.

Two professional contractors installing wood laminate flooring during home remodeling. in Broadmoor, CA

Call (866) 505-5254

Why Broadmoor Residents Choose Us for PGT Service

Noel Cabrera, our owner, grew up in Daly City’s Westlake district where the same postwar tract-home wave that built Broadmoor shaped his understanding of what fog-belt construction demands, and we now bring that same expertise to PGT repair in Daly City. He trained in construction technology at City College of San Francisco and spent years on residential jobs across San Mateo and San Francisco counties before founding Daly City Construction. That local background matters when a PGT unit fails in ways that have less to do with the window and more to do with what Broadmoor’s climate does to the rough opening around it.

We’re independent, and we say that plainly. We are not an authorized or sponsored PGT dealer, and we don’t answer to a manufacturer’s sales targets. When we look at a window that’s binding at the sill or a patio door with corroded rollers, we tell you whether a re-glaze and hardware refresh will buy you another five years or whether the frame has rotted past the point of repair. That honesty saves Broadmoor homeowners real money because the answer isn’t always “replace it.”

Our crews know the difference between genuine PGT hardware and aftermarket parts, and we stock the rollers, weatherstripping, and glazing components that Broadmoor’s older PGT units need most. That means less waiting on shipping and fewer return trips. For full scope, we’re a PGT sales & service contractor serving the entire Broadmoor service area.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common PGT Construction Problems We Solve in Broadmoor

The same five issues come up again and again on Broadmoor’s PGT windows and doors. Here’s what we see most:

  • Vinyl frame warping and binding on WinGuard sliders. Broadmoor’s persistent moisture exposure, especially on west- and north-facing walls where the fog settles longest, causes vinyl frames to swell and bind at the sill. Homeowners assume the track is bent, but usually it’s moisture expansion combined with years of micro-movement in the stucco surround.
  • Failed glazing seals on older WinGuard aluminum units. Salt-laden onshore wind and big temperature swings between foggy mornings and rare clear afternoons stress the sealant over time. Once the seal fails, argon escapes, condensation fogs the interior, and the unit’s insulating value drops sharply. This is the number one reason Broadmoor homeowners call us about PGT windows.
  • Deteriorated weep holes and weatherstripping. Wind-driven Pacific moisture gets past the frame when weep holes clog and weatherstripping compresses. Water wicks into the stucco surround and rots the rough opening from the inside out. By the time you see staining on the interior drywall, the damage is usually well underway.
  • Corroded rollers and tracks on sliding PGT doors. On slab-foundation homes with poor drainage, sliding glass doors sit close to grade where moisture collects. Rollers seize, tracks corrode, and the door becomes nearly impossible to open. This is a safety issue as much as a convenience one.
  • Hidden rot around rough openings. Broadmoor’s fog-belt moisture means the wood framing around window openings rots faster than it would in drier inland cities. We regularly find soft frames behind windows that look fine from the outside.

PGT Service in Broadmoor: What Local Conditions Mean for Your Equipment

Broadmoor’s housing stock was built between the 1940s and 1960s as postwar tract homes, most with original single-pane windows, uninsulated walls, and small lots on slab foundations. That means nearly every PGT window swap here is a retrofit into a narrow existing opening where the stucco repair and flashing detailing matter as much as the window itself — something our General Contractor in Broadmoor handles with care. A generic window contractor can drop a unit into an opening and caulk it shut. That’s not good enough when afternoon fog rolls in and wind drives moisture against the exterior for hours at a stretch.

On a west-facing postwar tract home in Broadmoor, our crew pulled a set of fogged PGT WinGuard aluminum sliders whose tracks had corroded and whose weep holes were packed with debris after years of onshore wind. We re-flashed the rough openings, cut back soft stucco around the sills, and set new PGT units with proper back-damming and drainage. The homeowner told us the interior stopped feeling damp within the first week. That’s what proper detailing does: it keeps the water outside the building envelope, not trapped inside the wall cavity.

This is also why we back-prime all exterior trim, use mildew-resistant primers, and pay close attention to drainage planes on every Broadmoor project. Contractors from drier parts of the Bay Area don’t always account for how much moisture this neighborhood gets. We do. It’s the kind of thing you only learn by working here for years.

PGT Models & Products We Service in Broadmoor

We work with the full range of PGT residential windows and doors common in Broadmoor homes. That includes PGT WinGuard aluminum impact-resistant single-hung and horizontal slider windows, PGT WinGuard vinyl impact-rated casement and awning windows, PGT Aluminum Series sliding glass doors, and PGT WinGuard vinyl impact sliding patio doors. We source genuine PGT replacement hardware – rollers, weatherstripping, glazing, and screen components – when matching the original profile matters. For non-structural wear items, we use quality aftermarket parts to keep honest pricing on a repair that doesn’t need OEM markup. The approach shifts depending on the unit’s age and condition, not a one-size-fits-all policy.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Service Pricing in Broadmoor

PGT work in Broadmoor spans a wide range depending on scope and unit count. Here are the numbers we work from:

Service Typical Range
Impact Window Installation $8,000 – $25,000
Window Replacement $4,500 – $15,000
Roof Repair (related flashing and water damage work) $400 – $1,800

What drives the cost is the number of units, the condition of the surrounding stucco and framing, and whether you need impact-rated glass or standard replacement. A single window replacement on a Broadmoor tract home might sit at the low end, while a full-home impact retrofit with stucco repairs and new flashing runs toward the higher number. Our free estimate includes a written line-item quote for every part of the job, and we’ll tell you flat-out if a repair will buy you years. Call (866) 505-5254 to set one up.

Serving Broadmoor, CA — Our Local Coverage Area

We’re based in the Broadmoor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – PGT Construction in Broadmoor

Service Areas Near Broadmoor

Beyond Broadmoor, we run PGT service across the northern Peninsula. We work in Daly City, PGT service in Colma, PGT service in Visitacion Valley, Brisbane, and Noe Valley. If you’re a few blocks outside Broadmoor, call us and we’ll let you know our schedule.

Book Your PGT Service in Broadmoor Today

Tell us what the house needs, not what you think it needs – then we’ll figure out the right fix. Call (866) 505-5254 to schedule your free PGT estimate in Broadmoor.

Written by Noel Cabrera, Owner at Daly City Construction, serving Broadmoor, PGT service in Pacifica, and the northern Peninsula.

Need Construction help in Broadmoor? Licensed & insured · Free in-home estimates response · free estimates
Call (866) 505-5254
Areas We Serve

Request a Free Estimate in Broadmoor

Tell us what you need — Daly City Construction responds fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and consent to receive communications via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch