Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Daly City, CA | Daly City Construction
We’re an independent contractor installing, repairing, and retrofitting PGT windows and doors across Daly City, CA. PGT service here isn’t a generic glass swap. It’s knowing how WinGuard aluminum frames react to decades of marine fog and why a stucco hillside rough opening usually needs rebuilding before a new unit goes in. Call (866) 505-5254 to schedule a free estimate.
Key Takeaways:
- Independent PGT service provider in Daly City, not manufacturer-affiliated or warranty-backed
- OEM PGT parts sourced first, aftermarket only for discontinued profiles
- Free estimates include a full rough-opening and flashing inspection, not just the glass
- Written line-item quotes with fixed pricing, no change orders
- Daly City Construction handles the full multi-trade scope when a PGT job uncovers rot, framing, or stucco issues
Why Daly City Residents Choose Us for PGT Service
We’ve been pulling PGT windows and doors out of fog-weathered stucco walls in Daly City Home Remodeling territory long enough to know what’s behind the frame before we open it. Noel Cabrera, our owner, grew up in the Westlake district where half the houses on his block came out of the same postwar tract-home wave. He trained in construction technology at City College of San Francisco and spent years on residential jobs across San Mateo and San Francisco counties before founding Daly City Construction. So when we tell you the rough opening is shot, we’re not guessing. We’ve opened enough of them to know.
We carry OEM PGT hardware, weatherstrip, glazing seals, and rollers for supported profiles. We keep common parts stocked locally so Daly City jobs don’t stall while a part ships from Florida. And because we’re a Daly City General Contractor, not a glass-only shop, we can handle what a PGT retrofit often uncovers here: rot repair, framing sistering, stucco patching, flashing rebuilds. One contractor, every phase. Not three phone calls and a finger-pointing contest.
The work is backed by our general contracting license and insurance. We pull permits when the scope requires it, and we pass the inspection before we call the job done.
Styles & brands we work with
Common PGT Construction Problems We Solve in Daly City
- Glazing seal failure and IGU fogging. Daly City’s persistent marine dampness works its way into aging sealant edges. The first symptom is hazy white streaking between the panes, long before the frame fails. We reseal where the glass and frame are still sound, and make the replace call when the IGUs are beyond saving.
- Roller and track corrosion on PGT Aluminum Series sliding glass doors. Salt-laden onshore fog migrates into the sill, settles on the rollers, and grinds them down over years. Doors get stiff, then seize. We replace rollers, clean and re-lubricate tracks, and correct any sill pitch problem that’s trapping moisture.
- Perimeter caulk and weatherstrip breakdown on exposed elevations. Wind-driven moisture pushes against stucco-to-frame joints on hillside-exposed sides of Daly City homes. Once the perimeter seal fails, water tracks behind the frame and into the rough opening. We strip the old sealant, inspect the flashing, and re-seal with a detail built for marine exposure.
- Weep system clogging in vinyl frames. PGT WinGuard Vinyl windows rely on weep holes to drain sill water. Wind-blown grit and damp buildup from Daly City’s fog belt clog those weeps, water backs up, and the rough-opening framing rots from the inside. We clear the weep system and correct any installation flaw that’s directing water the wrong way.
- Rough-opening rot hidden behind the frame. On stucco-over-wood-frame homes built from the 1940s through the 1970s, original underlayment is often compromised by decades of fog before anyone opens the wall. A window that looks like a simple reseal often isn’t. We open it, show you what’s there, and fix it properly.
PGT Service in Daly City: What Local Conditions Mean for Your Equipment
Here’s what most PGT pages won’t tell you about Daly City specifically. The city is built on steep, soft, sandy-soiled hillsides where homes sit shoulder-to-shoulder, and almost every project runs into the same twin constraints: permanently damp marine air that never really dries out, and tight lots with barely enough room for material staging. Homes in neighborhoods like Westlake, Serramonte, and the Mission Street corridor are mostly mid-century stucco-over-wood-frame construction on small hillside lots, just a short distance from Brisbane PGT service areas. That matters for PGT work because a window retrofit here usually means cutting out and rebuilding the rough opening and flashing detail, not just setting a new unit into the old stucco hole. The original underlayment from the 1940s through 1970s is already compromised by decades of fog. Geotechnical review and liquefaction-zone scrutiny come into play on bigger opening changes, because Daly City sits on liquefaction-prone sandy slopes. Few neighboring cities share this exact mix.
We learned this the hard way on a steep lot near the Mission Street corridor. We pulled a set of aging PGT WinGuard aluminum sliders whose rollers had seized and whose sill tracks were packed with grit and green algae from years of fog exposure. Cutting back the stucco revealed damp framing and failed original underlayment at the rough opening. We sistered the studs, rebuilt the flashing and sill pan, and re-set the units with new OEM rollers and fresh perimeter sealing. The owners finally got doors that slide freely and a wall that stops letting marine air track inside.
Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
PGT Models & Products We Service in Daly City
We service the PGT lines most common in Daly City homes: PGT WinGuard aluminum impact windows, PGT WinGuard Vinyl impact windows, PGT Aluminum Series sliding glass doors, and PGT PremierVue vinyl single-hung and slider windows.
Our parts approach is straightforward. We source OEM PGT hardware, weatherstrip, glazing seals, and rollers where the part is still supported by the manufacturer. For discontinued profiles, we use quality aftermarket equivalents that match the original spec. On older PGT units, we give an honest repair-vs-replace call: frames and glass in good shape get resealed and re-hung. A unit with fogged IGUs plus corroded rollers on an exposed elevation is usually cheaper to replace than chase. We’ll tell you which one your house is telling us.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Daly City
PGT work in Daly City lands in a broad range because the scope depends entirely on what’s behind the frame. Here’s what you can expect:
| Service | Typical Daly City Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
What drives the spread: how many units, whether the rough openings need rebuilding, whether hillside access forces street staging, and whether geotechnical review is triggered. Our free estimate covers the full inspection, the measurement, and a written line-item quote. No change orders. The price we quote is the price we build to. Call (866) 505-5254 to schedule yours.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well, including nearby PGT service in Visitacion Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Daly City
Usually the hardware. Salt-laden fog settles into the sill, corrodes the rollers, and grinds the track. The door frame itself often has years of life left. We inspect the rollers, track, and sill pitch first. If the hardware is tired but the frame and glass are sound, we replace the rollers, clean and re-lubricate the track, and adjust the alignment. You don’t need a new door just because the old rollers seized. Call (866) 505-5254 and we’ll tell you which one you’re looking at.
Most likely the glazing seal has failed and the insulated glass unit is fogging from Daly City’s persistent marine dampness. Moisture trapped between the panes shows as hazy white streaking long before the frame fails. If the IGU is still under manufacturer warranty, we’ll tell you how to pursue that. If not, we quote a glass replacement or a full unit replacement depending on what the frame and rough opening look like. Call (866) 505-5254 for an inspection and exact quote.
Sometimes, but not often in Daly City. Most of our hillside stock is stucco-over-wood-frame from the 1940s through 1970s, and decades of fog have usually compromised the original underlayment and rough-opening framing. Setting a new unit into that old hole means installing good glass over bad wood. We open the wall, inspect the framing and flashing, and rebuild where the house demands it. If your opening is clean, we’ll tell you that too, and save you the extra work. Call (866) 505-5254 for a free estimate.
No, Daly City Construction is an independent contractor. We are not authorized, sponsored, or warranty-backed by PGT. That means we give unbiased repair-vs-replace advice because we don’t answer to the manufacturer’s sales targets. It also means the manufacturer’s warranty on your PGT product stays with PGT, not with us. Our workmanship and the materials we install are covered by our own warranty. Call (866) 505-5254 if you have a specific warranty question.
Because Daly City sits on steep, liquefaction-prone sandy slopes. A big opening change, like widening an exterior wall for a larger PGT slider or window bank, adds load and changes how the wall transfers weight to the soil. Geotechnical review checks whether the slope will hold the new load before we commit to the design. It’s not bureaucracy. It’s the difference between a window that stays square and a wall that starts moving. Call (866) 505-5254 and we’ll walk you through the process.
Service Areas Near Daly City
We provide PGT construction service across Daly City and the surrounding communities, including PGT service in Broadmoor, PGT service in Colma, Visitacion Valley, Noe Valley, and Brisbane. Our crew knows the fog belt, and we stage materials the way tight Daly City hillside lots demand. See our Daly City service area page for the full coverage map. If you’re looking for broader PGT sales & service, that page covers our full brand scope.
Book Your PGT Service in Daly City Today
We’ll open the wall, show you what’s there, and quote the work honestly. Call (866) 505-5254 to schedule your free estimate. If your door won’t open and fog is coming through, we’ll get someone out fast.
Written by Noel Cabrera, Owner at Daly City Construction, serving Daly City since he started swinging a hammer on San Mateo County job sites.