Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Rancho Cucamonga, CA | Daly City Construction
We’re Daly City Construction, and we provide independent Mr-Glass installation and service across Rancho Cucamonga. What makes our Mr-Glass work here different is that we template every enclosure to the actual wall, not the spec sheet, because foothill soil movement has left a lot of Alta Loma bath framing out of plumb. If your Mr-Glass door binds, sags, or won’t latch, call (866) 505-5254 for a free estimate. We’re not manufacturer-authorized, just deeply familiar with the product line.
Why Rancho Cucamonga Residents Choose Us for Mr-Glass Service
Mr-Glass frameless enclosures and pivot doors are common in Rancho Cucamonga homes, but the installs that last are the ones where someone actually checked the wall first. That’s where we come in. Noel Cabrera, owner of Daly City Construction, spent years swinging a hammer on residential jobs across San Mateo and San Francisco counties before bringing that same stubborn attention to framing and finish work to the Inland Empire. Today our crews handle Mr-Glass sales & service with the same discipline: verify plumb, verify square, then order glass.
We stock OEM Mr-Glass hinges, handles, sweeps, and seal kits where the glass is templated to their proprietary hardware pattern. When a homeowner calls us from a 1970s tract home in the 91730 grid, we already know what we’re likely to find before we walk in the door.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Rancho Cucamonga
- Out-of-plumb walls in 1960s and 1970s tract homes. Original framing in the 91730 and 91701 flat grid has settled, so a stock Mr-Glass panel reveals uneven gaps at the hinge stile. The door swings and binds instead of closing flush. We re-template to the true wall plane and rebuild the jamb rather than shimming the glass into a stress point.
- Hard-water mineral spotting on low-iron glass and chrome hardware. Rancho Cucamonga’s dry, hard municipal water etches untreated glass and pits coated hinges far faster than coastal markets. We recommend seal-coated low-iron panels and matte or brushed fixtures for foothill bathrooms, and we’ll tell you which coatings actually hold up.
- Silicone and sweep-seal failure on tiled curbs. Santa Ana heat cycling through the Cajon Pass shrinks the silicone bead, letting water weep under the frame and rot the subfloor. We see this constantly in homes along the foothill wind corridor. The fix is a full curb rebuild and a fresh sweep, not another bead of caulk over the old one.
- Anchors pulled from drywall-only walls in older Alta Loma tract baths. Top rails and wall jambs screwed into drywall with no blocking sag, crack the glass edges, and pull hinges out under daily use. We open the wall, install solid blocking, and set the jamb the way it should have been done originally.
- Cracked or chipped glass at hinge holes. When a panel has chipped at a screw hole or is out of square from wall movement, we don’t patch it. We re-template and replace the panel. A chipped stress point on a frameless door is a crack waiting to spread.
Mr-Glass Service in Rancho Cucamonga: What Local Conditions Mean for Your Equipment
Nearly every Mr-Glass shower enclosure we template in the 91737 Alta Loma hillside homes sits on original pre-fire-code bath framing whose walls have crept out of plumb over decades of shrink-swell clay soil. That soil movement, not the glass, is the real reason so many of these doors stop latching. It’s a problem we rarely see on the flat 91730 grid a few miles downhill, where the tract homes sit on compacted, stable fill. In Alta Loma, the ground itself pushes the walls a fraction of an inch every year. A Mr-Glass panel that was square in 2005 is binding by 2025 because the studs moved. That’s why we field-verify plumb and square before ordering any glass, and why we add blocking at every hinge point. It’s more work up front, and it’s the difference between a door that works for three years and one that works for twenty.
We saw this recently in an Alta Loma hillside home off the Deer Creek side. A homeowner’s Mr-Glass frameless pivot shower door had stopped latching, and the hinge stile was chipping at the top screw hole. The back wall had crept out of plumb, and the original installer had anchored the jamb into drywall only. We reframed and blocked the jamb, re-templated the panel to the true wall plane, and set 1/2″ low-iron glass with new OEM pivot hardware and a fresh curb sweep. The door now swings and seals flush. No more chip, no more bind.
Mr-Glass Models & Products We Service in Rancho Cucamonga
We install and service the full Mr-Glass residential line: frameless fixed-panel walk-in shower enclosures in 3/8″ and 1/2″ low-iron glass, semi-frameless pivot and hinged shower doors with chrome or brushed-nickel hardware, sliding bypass tub/shower glass door kits, and custom-cut mirror and glass panel assemblies for vanity and bath walls. When OEM parts are available, we use them. When Mr-Glass has discontinued a hinge or handle, we specify quality aftermarket standoffs and seals that match the load rating and finish. If the glass is intact and only hardware has failed, we rebuild it. If the panel is chipped at a hole, out of square, or the wall has moved, we re-template and replace rather than patch a stress point.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Rancho Cucamonga
What you’ll pay for Mr-Glass work in Rancho Cucamonga depends on whether we’re rebuilding hardware on existing glass or templating a new enclosure to a wall that’s moved. Here are the ranges we work within:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
A free estimate includes wall inspection, hardware assessment, and a straight answer on repair versus re-template. Call (866) 505-5254 to schedule yours.
Serving Rancho Cucamonga, CA — Our Local Coverage Area
We’re based in the Rancho Cucamonga area and know this community well, and we also offer Upland Mr-Glass service. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Rancho Cucamonga
Yes, and we do it regularly. The trick is that we don’t force the glass to fit the wall; we measure the wall and order glass that fits it, then block and true the jamb so the panel has a solid mounting plane. A stock Mr-Glass panel on an out-of-plumb wall will bind and chip. Call (866) 505-5254 and we’ll tell you what your walls actually need.
If the glass is intact and the hinge pulled because the anchor was in drywall only, we rebuild the jamb with solid blocking and re-set the hinge. If the glass is chipped at the screw hole or the panel is out of square, we replace the panel. We’ll show you which situation you have before we quote anything.
Rancho Cucamonga’s hard municipal water leaves mineral deposits that etch untreated low-iron glass and pit chrome hardware much faster than coastal markets. We recommend seal-coated glass and matte or brushed fixtures for bathrooms on the foothill side, and we’ll set up the new enclosure to minimize standing water on the sweep and curb.
A straight shower glass replacement typically doesn’t need a permit through the City of Rancho Cucamonga building division. If we’re moving walls, relocating plumbing, or changing the shower footprint, that’s a different story and we pull permits ourselves as a licensed general contractor.
We can, as long as the glass is templated to the finished wall, not a guess. If you’re re-tiling and then adding the enclosure later, we’ll come back and measure after the tile is set. Matching a phased remodel is easier when the same contractor handles the framing, tile, and glass. Call (866) 505-5254 to talk through the sequence.
Service Areas Near Rancho Cucamonga
We run Mr-Glass service throughout the Rancho Cucamonga valley and up into the foothills, from the 91730 flat grid through 91737, 91739, and 91701. We also take calls from homeowners in nearby towns looking for Mr-Glass service in Placentia and Mr-Glass service in Anaheim. If you’re within a reasonable drive, we’ll come out and measure. See the full Rancho Cucamonga service area for details.
Book Your Mr-Glass Service in Rancho Cucamonga Today
We’re independent, not authorized by Mr-Glass. We think that’s the point. We work for you, not the manufacturer’s warranty ledger. Call (866) 505-5254 to schedule a free estimate. Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Rancho Cucamonga, Mr-Glass in Ontario, and the Inland Empire.