Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Placentia, CA | Daly City Construction
We’re Daly City Construction, an independent General Contractor – Placentia providing ES Windows construction and retrofit service across Placentia, CA. The short version: we install, replace, repair, and re-glaze ES Windows units in Placentia’s 1950s and 60s ranch homes, and we handle the permit-history research and stucco tie-ins that window-only outfits skip. We are not an ES Windows dealer or authorized installer, which means when a unit fails, our answer is always the one that makes sense for your wall, not the one that moves inventory. Call (866) 505-5254 to schedule a free estimate.

Why Placentia Residents Choose Us for ES Windows Service
Placentia’s housing stock runs heavy on post-WWII single-story ranch and stucco tract homes. Those walls were framed before modern window flashing standards existed, and most of them now carry room additions, enclosed patios, or converted garages. That changes how a window job goes. You’re not sliding a new unit into a clean, square rough opening. You’re working around old stucco returns, mismatched framing, and whatever a previous owner did thirty years ago that never got a permit.
Noel Cabrera, our owner, grew up in the Westlake district of Daly City watching his uncle re-frame a garage, and he trained in construction technology at City College of San Francisco before years of residential work across San Mateo and San Francisco counties. That’s why our crews treat an ES Windows install in Placentia as a structural job, not a glass swap, unlike a typical Fullerton ES Windows service might. We square the rough opening, flash it properly, set the unit on a sloped sill, and restucco the returns so the wall looks like it was never touched. If you’ve been told a window replacement is a one-day, drill-and-caulk job, you’ve been talking to the wrong contractor.
We also keep a practical parts approach. For ES Windows units still in support, we order genuine replacement sashes, glass, balances, and weatherstripping. When OEM parts are discontinued or back-ordered for weeks, we match quality aftermarket rollers, balances, and insulated glass units that perform as well or better. The point is keeping your Placentia home sealed and operating, not waiting on a supply chain. Call (866) 505-5254 and we’ll tell you straight what your windows need.
Styles & brands we work with







Common ES Windows Construction Problems We Solve in Placentia
Placentia’s semi-arid climate and Santa Ana wind events do specific things to ES Windows units. Here’s what we see most often in the 92870 and 92871 zip codes.
- Fogged dual-pane IGU seals on ES Windows low-E units. Placentia’s hot, dry summers and direct west-facing exposure cook the edge seals on older insulated glass. Once the desiccant inside the IGU is saturated, you get permanent fog between the panes. We replace the glass unit itself when the frame is sound, which costs far less than a full window replacement.
- Aluminum and vinyl frame expansion during Santa Ana heat cycles, with hairline cracking at the corners. ES Windows aluminum sliders and Series 800 vinyl single-hungs expand and contract with Placentia’s temperature swings. Over years, that movement opens hairline cracks at the welded or crimped corners, letting wind-driven dust and grit past the sash. We can often repair and re-seal these frames; when the corner is structurally cracked, we replace the sash.
- Water intrusion at the fin-and-flange and sill where ES Windows sliders were set into older stucco ranch walls with no backdam or weep detailing. This is the big one in Placentia. Many ES Windows slider doors in 1960s ranch homes were retrofitted into old stucco openings with no sill pan and no slope. The winter rain gets behind the flange, wets the rough opening, and rots the bottom plate. We pull the unit, rebuild the opening, and reset it with proper flashing.
- Failing rollers, latches, and balance hardware on ES Windows sliding doors and single-hungs installed over unpermitted enclosed patios and converted garages. When an opening was never squared and permitted, the door or window gets forced into a racked frame. Hardware wears out fast. We match OEM or quality aftermarket rollers, latches, and balances, and we square the opening before resetting the unit.
- Sticking ES Windows sliders during Santa Ana wind season, caused by frame racking and drifted dust. Placentia’s Santa Anas push fine dust into tracks and against weepholes. Combined with minor frame racking, the result is a slider that binds. We clean, adjust, and where needed, re-square the frame so the panel glides like it should.
ES Windows Service in Placentia: What Local Conditions Mean for Your Equipment
Here’s the thing most window contractors won’t tell you about Placentia: the city is fully built out. There are almost no new foundation pours. Nearly every ES Windows install here is a retrofit into an existing stucco opening in a 1950s or 60s ranch home. And in the older tracts, those openings have a history. A homeowner near the Placentia Civic Center area called us about a pair of fogged ES Windows Series 800 single-hungs, similar to cases we’ve handled for ES Windows repair in Brea. The units had been swapped into a 1960 stucco wall years earlier with no sill pan and no backdam. We pulled them, rebuilt and squared the rough opening with proper flashing and a sloped sill, reset the replacement sashes with fresh hardware, and restuccoed the returns to match the original 1960s finish. During that job, we also found a prior unpermitted patio enclosure that had to be corrected before the city would sign off on final inspection. That’s normal here.
Placentia’s building department checks setbacks and lot coverage limits against the older tract-era maps, and unpermitted work is common enough that permit-history research is a standard part of any window or door replacement we quote. Skip that step and your new ES Windows unit might pass the install but fail the inspection. We don’t skip it. That’s the difference between a contractor who knows Placentia and one who just knows windows.
ES Windows Models & Products We Service in Placentia
We work on the ES Windows product lines most common in Placentia’s housing stock: the Series 800 vinyl single-hung replacement window, the Series 2000 aluminum sliding glass door, vinyl horizontal sliders, and fixed or picture window units with low-E insulated glass. For units still supported, we source genuine ES Windows replacement sashes, hardware, glass, and weatherstripping. When OEM parts are discontinued, we match quality aftermarket rollers, balances, and IGU replacements. Our decision rule is simple: if the frame is sound, we repair and re-glaze. If the rough opening has rot or the unit has repeated seal failures, a new unit costs less over the next decade than chasing repairs. We stock the common ES Windows hardware and IGU sizes for faster Placentia turnaround, and most non-custom sashes arrive within days, not weeks.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Placentia
Every job in Placentia gets a line-item quote before work starts. No allowances, no hand-waving. Here’s what you can expect for the ES Windows work we handle in the 92870 and 92871 zip codes.
| Service | Typical Range in Placentia |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
The spread depends on frame condition, stucco repair scope, whether the rough opening needs re-squaring, and whether a permit correction or unpermitted-work legalization is required. A fogged IGU replacement on an ES Windows Series 800 single-hung in a sound frame sits at the low end. A full retrofit of multiple sliders into a 1960s stucco wall with rot repair and restucco work lands higher. Our free estimate includes a written, line-item scope of work with the exact price you’ll pay. Call (866) 505-5254 to schedule one.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well, including nearby ES Windows repair in Yorba Linda. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Placentia
Yes, in most cases. If the frame and rough opening are sound, we replace just the failed insulated glass unit, which costs significantly less than a full window replacement. Call (866) 505-5254 for an exact quote, and we’ll tell you if your frame is worth saving or if replacement is the cheaper ten-year decision.
Yes, nearly all window and door replacements in Placentia require a building permit, and the city verifies setbacks and lot coverage against the original tract-era maps. If prior unpermitted work is discovered, it must be legalized or corrected before final sign-off. We handle permit research, submittal, and inspection coordination as part of the job. Call (866) 505-5254 with your address and we’ll check what applies to your property.
Santa Ana winds push fine dust and grit into the tracks and against the weepholes, and if the frame has racked even slightly over the years, the panel binds. We clean and adjust the hardware first, and if the frame is out of square, we re-square the rough opening and reset the unit. Call (866) 505-5254 and we’ll take a look.
Yes, and the difference is dramatic. Modern ES Windows low-E insulated glass reflects more heat and seals far better than 1960s single-pane originals, especially in Placentia’s hot, dry summers. The key is the install detail: proper flashing, a sloped sill, and a backdam are what keep winter rain out of the rough opening. Call (866) 505-5254 for a free estimate on your specific openings.
Yes. We restucco the returns to match the original texture and finish, and we color-match to the existing wall. On Placentia’s older ranch homes, that means matching the sand float or smooth finish typical of the 1950s and 60s tract work. Call (866) 505-5254 and we’ll match it properly.
Service Areas Near Placentia
In addition to Placentia, we serve nearby Orange County communities where ES Windows retrofit work comes with similar postwar-era stucco and permit-history considerations. Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane are all within our service reach. Our ES Windows service in Anaheim and ES Windows service in Chino pages cover those areas. For the full picture, see our Placentia service area page or learn more about our ES Windows sales & service work across the region.
Book Your ES Windows Service in Placentia Today
Tell me what the house needs, not what you think it needs, and we’ll figure out the right fix. If you’re in Placentia and your ES Windows units are fogged, sticking, leaking, or just tired, call (866) 505-5254 now to schedule your free estimate. We’ll give you a written line-item quote and a straight answer on repair versus replacement.
Written by Noel Cabrera, Owner at Daly City Construction, serving Placentia and the surrounding area.