Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Daly City Homeowners Choose ES Windows Construction
We’re an independent Daly City construction crew that installs and services ES Windows across the fog belt and hillside housing stock this city is known for, and we also offer ES Windows in Broadmoor. If you own ES Windows vinyl sliders, single-hungs, or picture walls that fog, stick, or leak, we’re the local team that knows exactly how those units behave in marine air and on sloped lots. Our credibility comes from field repetition, not any ES Windows authorization, partnership, or warranty endorsement. Call (866) 505-5254 for a straight diagnosis, and we’ll tell you whether that window needs reglazing, re-detailing, or replacement.

Why Trust Daly City Construction for Your ES Windows Construction?
Noel Cabrera, our owner at Daly City Construction, grew up in the Westlake district, where half the houses on his block were built in the same postwar tract-home wave. Those stucco-over-wood-frame homes from the 1940s through 1970s dominate Daly City, and they all fight the same battle: cool, damp, wind-driven fog that never really burns off. Noel trained in construction technology at City College of San Francisco and put in years on residential jobs across San Mateo and San Francisco counties before landing back in Daly City, where he’s known for straightforward renovation work on fog-weathered homes and providing ES Windows service in Colma. That means our ES Windows knowledge is built on what actually happens to these units after five, ten, fifteen years of salty air and heavy wind, not what the spec sheet says.
When we work on ES Windows products, we match OEM sashes, rollers, balances, screens, and weatherstripping where the unit’s age and series let us. When OEM parts are discontinued or unavailable, we move to quality aftermarket glazing and hardware that fits like the original. Our team knows which ES Windows series share roller profiles and which sealed units interchange. That depth cuts down the back-and-forth you’d get from a general handyman who hasn’t touched these specific frames before.
Styles & brands we work with







Common ES Windows Construction Problems We Fix in Daly City
Daly City’s fog belt conditions beat up windows faster than most homeowners expect. Here’s what we see on ES Windows units week after week:
- Fogged or water-spotted dual-pane sealed units. The IGU seal fails in constant coastal humidity, and the glass hazes from the inside. Wiping does nothing because the moisture sits between the panes. This is the most common ES Windows failure we repair in Daly City, and reglazing usually fixes it if the frame is still square and sound.
- Slider and hung sashes that stick or drag. Wind-blown grit and salt film pack the tracks and wear the rollers and balances flat. An ES Windows slider that used to glide now takes two hands to shove. Sometimes a track deep-clean and fresh rollers solve it. Sometimes the stiles are worn past saving and the sash needs replacement.
- Frame and sill water intrusion. Caulk and flashing at the rough opening were never re-detailed when the windows went in, so fog-season moisture wicks behind the vinyl. By the time the owner sees a stain on interior drywall or the bottom of the frame feels soft, the sill may be rotted behind what looks like clean vinyl. We pull the unit, re-flash with sill pan, and rebuild the rough opening properly.
- Condensation and mold at interior jambs. Daly City’s cool, damp air meeting warm interior surfaces shows up as water beading on glass and jambs every winter morning. On ES Windows units this often reads first as mildew along the sill channel. It’s usually a whole-unit thermal problem, not just a glass problem, which is why tossing a dehumidifier nearby rarely solves it.
- Sliding glass patio doors that won’t close flush. The rollers load up, the track deflected under years of traffic, and the door leaves a gap at the top corner. Fog pushes through every night. We rebuild the track, replace rollers, and reset the panel so it locks square again.
ES Windows Parts & Our Repair-vs-Replace Approach
We stock common ES Windows slider rollers, balances, screen frames, and weatherstripping locally so a repair call doesn’t turn into a two-week parts wait. When a unit still matches an active ES Windows series, we order OEM sashes and glazing units directly. When the series is old or discontinued, we use aftermarket sealed glass units and hardware that match the original dimensions and glass package.
The honest decision comes down to frame condition. If the vinyl frame is square, the corner welds are solid, and only the sealed unit has failed, reglazing is the better money. If the frame is bowed, the sill has rotted behind the vinyl, or the rough opening was never flashed correctly, we tell you straight that replacement is smarter than patching. We’d rather walk you through why than sell you a repair that fails in two winters. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix. Call (866) 505-5254 to have us look at your units.
Our ES Windows Service Process – Step by Step
Here’s how we approach ES Windows service in Daly City so the fix matches the actual problem, not a guess:
- 1
Diagnosis on site. We inspect the frame, the corner welds, the sill flashing, the rollers and balances, and the glass package. We check for water staining behind the interior trim and test how the sashes operate. On ES Windows sliders we pull the panel to inspect what packed into the track.
- 2
Scoped repair or replacement. We write up what’s actually wrong: reglaze if the frame is sound, re-detail the rough opening if moisture is getting behind the vinyl, or replace the unit if the frame or sill has rotted past saving. We show you the options with line-item pricing before any work starts.
- 3
Parts matched to the unit. We order OEM ES Windows sashes, rollers, balances, or screens where the series is still active. When OEM is gone, we source aftermarket parts with matching dimensions and glass specs. No adapters, no shims hiding a wrong fit.
- 4
Installation with re-flashing. If we’re replacing a full unit, we strip the rough opening bare, install new flashing and sill pan, set the unit level and square, and seal it against Daly City’s wind-driven fog from all four sides.
- 5
Test and warranty walkthrough. We operate every sash and slider, check the lock engagement, and spray-test the exterior where flashing was redone. Then we walk you through what we found and what would have happened if it had sat another season.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Daly City
We work across the ES Windows residential line: vinyl single-hung and double-hung replacement units, horizontal sliders, fixed and picture windows with tempered glazing for view walls, and sliding glass patio doors. We service existing installs, reglaze failed sealed units, replace sashes and rollers, and install new ES Windows products when it’s time to swap out old frames. For Daly City homeowners dealing with fog-season condensation, we also help spec replacement glazing packages that reduce interior surface moisture, and we bring the same expertise to ES Windows in Visitacion Valley. We stock common slider rollers, balances, screens, and weatherstripping locally for quicker turnaround on service calls.
We Also Service These Brands
ES Windows is one strong window brand we know deeply, but Daly City Construction works across 50+ manufacturer lines. If your home has KraftMaid cabinets, Cambria or Silestone countertops, or Kohler fixtures tied into the same renovation, we handle those too. One contractor, every phase, material choices that match your project, not our inventory.
FAQs – ES Windows Construction Service in Daly City
Yes, when the series is still active we order OEM sashes, sealed glazing units, rollers, balances, and screens directly. When an older ES Windows series is discontinued, we use quality aftermarket glass and hardware matched to the original dimensions and glass package. Call (866) 505-5254 with your window’s model or a photo of the corner label, and we’ll tell you what’s available.
That’s a failed dual-pane seal. Moisture has breached the sealed unit and is sitting between the panes, so no amount of glass cleaner on the outside will fix it. We see this constantly in Daly City because coastal humidity stresses the IGU seal year-round. Reglazing usually resolves it if the frame is still square. Call (866) 505-5254 and we’ll confirm whether it’s a reglaze or a replacement situation.
Often yes, but it depends on what’s causing the condensation. Daly City’s damp air meeting warm interior surfaces can bead water on any window, but newer ES Windows units with better thermal breaks and improved glass packages usually reduce interior surface condensation noticeably. If the condensation sits between the panes, that’s a seal failure, not a humidity issue. Call (866) 505-5254 for a site check.
Yes. Daly City’s wind drives salt film and fine grit into slider tracks, which grinds down rollers and packs balances. A slider that feels heavy or won’t lock flush is usually worn rollers and a loaded track, not a broken frame. We pull the panel, clean the track, replace rollers with matched parts, and reset the panel square. Call (866) 505-5254 if your slider is fighting you.
Reglaze when the only problem is failed sealed glass and the frame is square and solid. Replace when the frame is bowed, the sill has rotted behind the vinyl, or the rough opening was never flashed properly and water has been getting behind the unit for years. In Daly City’s fog belt, repatching a rotted rough opening without replacing the unit just delays the same failure. Call (866) 505-5254 and we’ll give you the straight answer.
Window replacement with ES Windows units in Daly City typically runs $4,500 to $15,000 depending on the number of openings, glass package, and how much re-flashing the rough openings need. Impact window installation runs $8,000 to $25,000 for a full opening set. Roof repair around window openings, where flashing failures cause leaks, typically runs $400 to $1,800. Call (866) 505-5254 for an exact quote on your openings.
| ES Windows Service | Typical Daly City Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (flashing/leak work) | $400 – $1,800 |
Book Your ES Windows Service in Daly City, CA
If your ES Windows units fog, stick, leak, or let the fog belt in every morning, call (866) 505-5254 for a free, no-pressure estimate. We’ll tell you what’s actually wrong and what the honest fix costs, whether that’s reglazing, re-flashing, or full replacement.
Written by Noel Cabrera, Owner at Daly City Construction, serving Daly City’s fog-belt homes since he started swinging a hammer on the Peninsula.