Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Marin City, CA | Daly City Construction
We provide independent ES Windows construction service across Marin City, CA – everything from sealed-unit replacement on fogged sliders to full window installation. ES Windows repair and installation is not something you can hand to a general handyman here, because this is one of the dampest, steepest, most drainage-sensitive pockets in southern Marin. Call (866) 505-5254 for a free estimate, and we’ll tell you straight whether your frames are worth re-glazing or whether replacement makes more sense.
Noel Cabrera grew up in the Westlake district of Daly City, where fog-weathered postwar tract homes taught him early that water always finds the weak point in a wall. Our crews bring that same eye to every ES Windows sales & service job we take on in Marin City: read the window, read the wall, read the slope, then fix all three.
Why Marin City Residents Choose Us for ES Windows Service
Most window contractors in southern Marin can swap glass, but few of them have spent real time working with ES Windows’ profile and glazing documentation on the exact housing stock you find in 94965. We’ve serviced ES Windows Series 800 vinyl single-hungs and sliders, Series 3000 casements, aluminum horizontal sliders, and fixed picture units across the older mid-century core below the Headlands and the newer infill homes on the hillsides above it.
That matters because ES Windows components fail differently in Marin City than they do ten minutes inland. We keep factory-profile glazing beads, gaskets, rollers, and sealed units on hand or on rapid order so we’re not making a Marin City homeowner wait three weeks for a part that was spec’d wrong by someone guessing from a photo. And when OEM hardware isn’t available, we spec aftermarket equivalents that match the original profile, not whatever’s on the shelf at the local hardware store.
Noel’s training at City College of San Francisco and years on residential and light commercial jobs across San Mateo and San Francisco counties mean we approach every ES Windows repair as a building-envelope problem, not just a glass problem. Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Marin City
These are the failure modes we see repeatedly on ES Windows units in Marin City:
- Fogged dual-glazed sealed units. The daily marine layer pushes damp air against north and west elevations for months at a time. When the seal on an ES Windows dual-glazed unit fails, condensation gets trapped between the panes and hazes the glass permanently. We replace the sealed unit with factory-profile glazing beads and gaskets, restoring clarity without ripping out a sound frame.
- Corroded aluminum slider tracks and clogged weep channels. Wind-driven grit off the Headlands works its way into ES Windows aluminum slider tracks, and the persistent fog-belt moisture accelerates corrosion. Weep holes plug, water backs up over the sill, and the first thing you notice is a brown stain on the interior drywall below the window. We clear the channels, treat the corrosion, and reset the track so the window drains the way ES Windows designed it to.
- Vinyl sliders out of square and not latching. Marin City’s hillside lots settle and shift more than flat-land parcels, and when a home racks slightly, ES Windows vinyl sliders drop out of square. A window that won’t latch is a security and weather issue. We re-square the sash, adjust the rollers and keepers, and reinforce the frame anchorage where the wall ties show movement.
- Hardened glazing gaskets and corner seals. Constant damp-cool cycling shrinks and stiffens the rubber gaskets and corner seals on ES Windows units. Once they harden, driving winter-storm rain finds a path at the head and jamb joints. We strip the old gaskets, clean the profiles properly, and install fresh factory-spec or equivalent gaskets so the window sheds water again.
- Sill flashing failures tied to drainage problems. On the steep hillside lots above the Marin City valley floor, runoff from the slope above pools against window sills after winter storms. Even a well-installed ES Windows unit leaks when water has nowhere to go. We correct the sill flashing and coordinate with the gutter and downspout work so water finally runs away from the wall instead of into it.
ES Windows Service in Marin City: What Local Conditions Mean for Your Equipment
Because Marin City is unincorporated, permits and inspections run through Marin County rather than ES Windows in Sausalito next door. That’s not a bureaucratic footnote – it changes how an ES Windows project gets closed out. On the steep hillside lots above the valley floor, County reviewers often want geotechnical and drainage review tied to the same project before they’ll sign off on sill and flashing work. We’ve been through that process enough times to plan for it from day one, which means we don’t get a window job 90% done and then stall waiting for a drainage report nobody mentioned. When we say we work ES Windows construction service in Marin City, we mean we work the whole Marin City context: unincorporated Marin County permitting, slope stability, runoff management, and the window itself.
On one steep hillside lot above the valley floor, our crew took on a set of fogged ES Windows Series 800 vinyl sliders where runoff from the slope above had been pooling against the sills after winter storms. We replaced the failed sealed units, reset the corroded tracks and weep channels, re-sealed the jambs, and coordinated the gutter and downspout correction downhill so water finally ran away from the wall. The County inspection through unincorporated Marin signed off on the flashing detail once the drainage was addressed. That’s the difference between a window repair and a waterproofing job – in Marin City, they’re the same job.
ES Windows Models & Products We Service in Marin City
We service the full range of ES Windows product lines commonly installed across Marin City’s patchwork of mid-century worker housing and newer hillside infill:
- ES Windows Series 800 – vinyl single-hung and slider windows, the workhorse in older Marin City homes
- ES Windows aluminum horizontal slider windows – common on mid-century apartment and small single-family units
- ES Windows Series 3000 – vinyl casement windows, often found on kitchen and bath elevations
- ES Windows dual-glazed fixed picture windows – large fixed units facing the Headlands and valley views
We pull ES Windows factory-profile glazing beads, gaskets, rollers, and sealed units where available. When OEM hardware is unavailable or discontinued, we spec equivalent-quality aftermarket parts that match the original profile so the window operates and weathers like ES Windows intended. We don’t push a full replacement when a frame is sound and a re-glaze plus re-seal does the job; when the frame or wall ties are failing, replacement is the honest call, and we’ll show you exactly why.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Marin City
Window work in Marin City spans a wide range because some jobs are a quick sealed-unit swap and others involve structural work on compromised frames exposed to years of fog, runoff, and settling. Here’s what we typically scope:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
What drives the number: whether we’re re-glazing a sound frame or pulling and replacing the whole unit, how much flashing and drainage correction the site requires, and whether Marin County requires geotechnical or drainage review as part of the permit. Every estimate includes a written line-item quote and an on-site assessment of the window, the wall assembly, and the drainage path. Call (866) 505-5254 to schedule your free estimate.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Marin City
No. Fogging between the panes means the dual-glazed sealed unit has failed, but if the ES Windows frame is sound, we can replace just the sealed unit with factory-profile glazing beads and gaskets. The Marin City damp doesn’t automatically mean full replacement – it means the seal quality and installation have to be right. Call (866) 505-5254 and we’ll assess the frame before recommending anything.
Yes. Because Marin City is unincorporated, your window project runs through Marin County permits and inspections, not Sausalito’s. On steep hillside lots, the County often wants geotechnical and drainage review tied to the window work before final sign-off. We’re familiar with that process and plan for it from the start so your project doesn’t stall.
Wind-driven grit from the Headlands clogs the weep channels, and the persistent coastal moisture corrodes the aluminum track. Water backs up over the sill and stains the drywall. We clear the channels, treat the corrosion, reset the track, and correct any flashing or drainage issues so the window drains properly again.
Yes, and in Marin City that combination often matters more than the window itself. Runoff from steep slopes pools at sills and overworks the window’s drainage path. A properly detailed metal roof and gutter system directs water away from the wall assembly, which is why we coordinate window, roofing, gutter, and drainage work as one scope. Call (866) 505-5254 for a free assessment of your roofline and window drainage.
Yes. On Marin City hillside lots, settling and racking throw vinyl sliders out of square. We re-square the sash, adjust the rollers and keepers, and reinforce the frame anchorage where needed. If the frame itself is compromised, we’ll show you the evidence and quote a replacement honestly.
Service Areas Near Marin City
Beyond Marin City, our ES Windows crews cover Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane. For ES Windows work up the peninsula, see our ES Windows service in Tiburon page. For coastside properties facing heavier fog and storm exposure, we also offer ES Windows service in Montara. We work throughout the Marin City service area and the surrounding 94965 ZIP code.
Book Your ES Windows Service in Marin City Today
If your ES Windows units are fogging, leaking, sticking, or not latching, call (866) 505-5254 now. We’ll schedule an assessment, put a written line-item quote in your hands, and tell you exactly what the house needs – nothing more.
Written by Noel Cabrera, Owner at Daly City Construction, serving Marin City and the surrounding 94965 area.