Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in Daly City, CA | Daly City Construction
We install and repair Toto toilets, bidets, and washlets across Daly City, with a repair-vs-replace approach that saves homeowners money when a fixture still has life in it. The one thing that sets our Toto work apart here is that we know exactly what this fog does to washlet electronics and fill valves. If you have a Toto Drake phantom-flushing in a hillside stucco home, or a Washlet that keeps throwing a fault light, call (866) 505-5254 for a straight answer and a fair estimate.

Why Daly City Residents Choose Us for Toto Service
Noel Cabrera started doing remodel and fixture work on Daly City’s postwar tract homes before washlets were common, and he has watched this city’s damp marine air chew through bathroom fixtures that work fine three miles inland. We treat Toto as what it is: a well-engineered fixture line that still fails in predictable ways when ventilation is poor and moisture never really leaves the room. Our crews have set and serviced enough Drake, Ultramax II, Aquia, and Washlet units to know which problems are worth chasing with OEM parts and which ones are a money pit.
We are an independent Toto service provider. That means we do not have a manufacturer’s sales quota, and we do not steer you toward replacement when a $23 OEM fill valve and 40 minutes of work fixes the toilet. Our Toto sales & service work covers everything from rough-in correction on mid-century bathrooms to full fixture packages for new builds.
Styles & brands we work with







Common Toto Construction Problems We Solve in Daly City
- Washlet fault lights and dead control boards. The C100, C200, and S500e seats pack a lot of electronics into a damp bathroom. Daly City’s fog-belt air keeps humidity high year-round, and in older stucco homes without proper exhaust, moisture condenses inside the seat housing. We see corroded circuit boards and shorted moisture sensors far more often here than in drier parts of the Peninsula. Sometimes we repair with OEM boards; when corrosion has spread, we are honest about replacement.
- Phantom running and weak flushes on Drake and Ultramax toilets. Hard supply water in Daly City leaves mineral scale on fill valves and flush valves, which causes the toilet to trickle-run for minutes after each flush. The 1.28 gpf Gravity Flush line is efficient, but efficiency does not matter if the flapper never fully seats. We replace with OEM fill valves and seals, not generic kits that fail in half the time.
- Silent leaks from perished rubber seals. The same fog that rusts mailboxes accelerates rubber degradation. Flappers, tank-to-bowl gaskets, and supply line washers dry-rot from cycles of damp and dry that never fully resolve. A silent leak between tank and bowl often shows up as a water stain on the ceiling below a second-floor bath. We replace seals and every related supply line in one visit.
- Glaze and rim-jet buildup from Daly City water. Mineral scale collects in the rim holes of Toto’s Cefiontect-glazed bowls, reducing flush performance over time. The glaze itself is excellent; the issue is supply water chemistry, not Toto’s coating. We clean and descale properly rather than chipping away at the porcelain with improvised tools.
- Rough-in mismatches on mid-century homes. Toto’s standard 12-inch rough-in works fine on modern builds, but Daly City homes from the 1940s through the 1970s often have old 10-inch or 14-inch rough-ins, out-of-square soil pipes, or undersized venting. We correct the rough-in and venting before setting the fixture. Otherwise you are fighting the same problem every year.
Toto Service in Daly City: What Local Conditions Mean for Your Equipment
Here is the thing most generic service pages miss. Daly City sits in a fog belt on steep, sandy, liquefaction-prone hillsides, with homes packed close enough that your neighbor’s stucco wall is six feet from your bathroom window. That combination means two things for Toto owners. First, liquefaction-zone scrutiny applies to more than foundations; when a hillside lot settles even a few millimeters, cast-iron waste pipes and closets flanges shift, and that shift shows up as a toilet that rocks, a wax ring that fails, or a Washlet seat that never sits square. Second, the permafog means your bathroom almost never fully dries out. We spec ventilation and waterproofing detail far more aggressively on Daly City jobs than we would in, say, Toto in Brisbane or South San Francisco. On an Westlake district stucco home, for example, we regularly see washlet circuit boards that corroded because the homeowner ran the seat in a bathroom with a 50 CFM exhaust fan that barely moved fog-fed air. In Daly City, the exhaust upgrade is not optional when we install electronic bidet seats; it is the difference between a five-year fixture and a five-month one.
Toto Models & Products We Service in Daly City
We install and service the full Toto residential range: Drake and Eco Drake two-piece toilets, Ultramax II and Aquia one-piece models, the Guinevere and Promenade bath and vanity collections, and Washlet seats from the C100 through the S500e. For repairs we use OEM Toto fill valves, flappers, washlet components, and seals on anything we can reasonably keep running. We keep the common OEM parts for Drake and Ultramax models on our trucks, so most Daly City repair calls do not require a second trip. The only time we reach for aftermarket is when an OEM part has been discontinued or adds no real service life. And we are honest about washlet electronics: once corrosion reaches the board on an older C100, chasing the fault is throwing good money after bad.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in Daly City
Toto service pricing in Daly City depends on whether we are repairing a fixture or setting a new one as part of a larger Home Remodeling – Daly City project. Here are the current market ranges for the work we do:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Simple fixture swaps and valve repairs run well below a full bathroom remodel, of course. A fill valve replacement on a Drake costs far less than a new toilet, and we will tell you which one you actually need. Your free estimate is a written, line-item quote, and if something changes once we open the wall, you will know before we touch it. Call (866) 505-5254 to schedule yours.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in Daly City
In nearly every case we see, the fault light traces back to moisture, not the seat itself. Daly City’s fog-belt air keeps bathroom humidity high, and if your exhaust fan is undersized or blocked, condensation collects inside the seat housing and corrodes the circuit board or tricks the moisture sensor into a false fault. We check the bathroom ventilation first, then the seat. The repair may be as simple as an OEM sensor replacement or as involved as a new seat with a proper exhaust upgrade. Call (866) 505-5254 and we will diagnose it properly before quoting.
Yes, and that is usually the right call. A Toto Drake with a scaled or failing fill valve does not need to be replaced; we swap in an OEM Toto fill valve, clean the scale, and the toilet is back to normal. We only recommend replacement when the bowl, trapway, or porcelain itself has a problem that a valve cannot fix. Call (866) 505-5254 for a quote on a fill valve replacement.
It depends on the scope. If we are only swapping a toilet and vanity, no. But if we are moving a rough-in, cutting into a load-bearing wall, or changing the floor structure on a lot that sits in a liquefaction zone, Daly City’s building department may require geotechnical review before we pull permits. As your General Contractor in Daly City, we handle that process for you, and we always verify the requirement before work starts. Call (866) 505-5254 and we will tell you what your specific project needs.
Usually, but the rough-in matters. Most 1940s through 1970s Daly City homes were built with a 12-inch rough-in, but we have seen enough 10-inch and 14-inch rough-ins, out-of-square flanges, and sagging cast-iron waste lines to never assume. We measure before we order. If the rough-in is off, we correct it with an offset flange or reposition the waste line, then set the Toto square so it does not rock against the tile. Call (866) 505-5254 for a measurement visit.
Yes, for a specific reason that matters here. One-piece models like the Ultramax II and Aquia have no tank-to-bowl joint, which eliminates the most common silent leak point we see in fog-belt bathrooms. That single seam is where damp air, hard water, and rubber gaskets all collide. For a Daly City bathroom that never really dries out, we recommend a one-piece Toto if your budget allows. Call (866) 505-5254 and we will price out the options.
Service Areas Near Daly City
Our Toto service routes cover all of Daly City service area neighborhoods including Westlake, Broadmoor, St. Francis Heights, and the Mission Street corridor. We also take calls close by in Toto service in Broadmoor, Toto service in Colma, Brisbane, and the Visitacion Valley side of San Francisco.
Book Your Toto Service in Daly City Today
If your Toto is running, leaking, or throwing a fault light, do not wait for the fog to make it worse. Call (866) 505-5254 for a free estimate. We will show up, tell you what the fixture actually needs, and fix it right. Tell me what the house needs, not what you think it needs, then we will figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Daly City since the day he first swung a hammer on his uncle’s Westlake garage.