Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Daly City Homeowners Choose Toto Construction
Daly City Construction provides independent Toto service in Daly City, CA, including fixture installation, repair, and full bathroom remodeling, specializing in Toto Drake, Eco Ultramax, Vespin II, and Washlet+ systems. We’re not a Toto dealer or authorized service center – we’re a licensed general contractor whose crew handles Toto fixtures daily, from rough-in adjustments on hillside slabs to electrical work for Washlet+ bidet seats. The difference is that we understand how Toto products behave in Daly City’s specific housing stock: mid-century stucco homes with older plumbing, tight bathroom footprints, and the moisture that settles into everything. Call (866) 505-5254 to talk through your Toto project.
Why Trust Daly City Construction for Your Toto Construction?
Toto builds precision-engineered fixtures, and precision matters when the subfloor isn’t level, the rough-in is off by half an inch, or the electrical panel predates GFCI requirements. Our crew has installed and serviced Toto toilets and Washlet systems in hundreds of Daly City bathrooms, from compact Washlet-ready setups in condos near Mission Street to full remodel specs in Toto in Broadmoor and Westlake homes. We know the supply quirks – the Vespin II’s unique rough-in tolerance, the Washlet+’s dedicated circuit requirement, the Drake II’s flush tower assembly – because we work with them several times a month, not because we’re endorsed by Toto.
Noel Cabrera, our owner, grew up in the Westlake district of Daly City, where half the houses on his block were built in the same postwar tract-home wave. He spent years swinging a hammer on residential and light commercial jobs across San Mateo and San Francisco counties before building Daly City Construction. His training at City College of San Francisco means he approaches Toto work the same way he approaches every other trade: figure out what the house actually needs, then execute it straight. His signature line on the job site sums it up: “Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.”
We use genuine Toto OEM parts for critical components – fill valves, flush towers, Washlet control boards – because aftermarket substitutes on those parts create callbacks and void whatever warranty coverage remains. We’re insured, state-licensed, and we stand behind our workmanship on every Toto install and repair we complete in Daly City.
Styles & brands we work with
Common Toto Construction Problems We Fix in Daly City
- Washlet+ power failures and beeping after outages. Daly City’s older electrical panels, especially in 1940s-1960s stucco homes near the hills, often lack dedicated bathroom GFCI circuits. A power surge or a shared circuit tripping can fry the Washlet+ control board or power module. We see this constantly. The fix is usually a new OEM control board plus running a dedicated GFCI outlet behind the toilet so the seat stops sharing a circuit with a hair dryer or space heater.
- Drake II phantom flushing and weak flushes. The Drake II uses a flush tower assembly instead of a traditional flapper, and that tower seal wears out with hard water and age. When it stops seating correctly, water seeps from the tank into the bowl, the fill valve cycles on its own, and the homeowner hears a faint hiss or refill at odd hours. We replace the flush tower seal and the fill valve together, since by the time one fails, the other is usually close behind.
- Tank-to-bowl gasket leaks from DIY installs. This is one we see in Daly City constantly, especially in older hillside homes where floors have settled. A homeowner installs a Toto Drake or Eco Ultramax, tightens the tank bolts a little too hard, and the gasket pinches or misaligns. Water seeps slowly under the toilet, soaks into the wood subfloor, and by the time anyone notices, there’s rot repair to do. We fix the gasket and inspect the subfloor as part of the same call.
- Wax ring and flange failures on uneven floors. Daly City’s sandy-soiled hillsides mean slab settling is common, and a toilet flange that’s slightly below the finished floor or no longer level can cause a wax ring to fail. We reset the toilet on a new wax ring or flange adapter and shim it properly so it sits stable on the tile. Skipping the shim step is how you get a rocking toilet that breaks its seal again in six months.
- Washlet+ seat lid moisture intrusion. The Washlet+ seat is an electrical device living next to a water source, and Daly City’s year-round dampness doesn’t help. Steam from showers and the general marine fog influence can work moisture under the seat lid over time, corroding connectors and causing intermittent function or error codes. We check for moisture damage during every Washlet service call and recommend ventilation upgrades when the bathroom itself is trapping steam.
Toto Parts & Our Repair-vs-Replace Approach
For critical components – fill valves, flush towers, Washlet control boards, power modules – we use genuine Toto OEM parts, not aftermarket. These parts are engineered to Toto’s tolerances, and they’re what keep the fixture performing the way it did on day one. For cosmetic items like toilet seats and lids, we offer quality aftermarket alternatives when OEM is on backorder or priced unreasonably, and we’ll tell you what you’re trading off either way.
Our repair-vs-replace conversation is honest. A $40 fill valve on a Drake II is always worth fixing. A Washlet+ control board on a ten-year-old seat might cost $300 or more, and at that point we’ll show you what a new Washlet+ seat or a full replacement toilet would cost instead. In Daly City, where bathroom remodels run $9,000 to $28,000 depending on scope, spending $500 to keep a quality Toto fixture alive for five more years is usually the smart call – but we’ll never push a repair on a fixture that’s reached the end of its service life. Call (866) 505-5254 if you’re trying to make that call right now.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We inspect the Toto fixture, test the water supply line and shutoff valve, check for subfloor moisture or settling, and test electrical connections on Washlet+ systems. The goal is to identify the root cause, not just the symptom – a running Drake II is rarely just a bad fill valve, and a beeping Washlet+ isn’t always a bad board.
- 2
Repair or install. We use OEM Toto parts for critical components, reset flanges and wax rings when needed, run dedicated GFCI circuits for Washlet+ seats, and install new Toto fixtures to manufacturer spec. If the floor isn’t level, we shim it; if the rough-in is off, we use the right flange adapter rather than forcing it.
- 3
Testing. Flush cycle tests, refill time checks, leak checks around the base and tank, and full function tests on Washlet+ bidet seats – water temperature, seat heat, spray pressure, and power. We run the fixture through the same cycles you would, several times over.
- 4
Warranty and cleanup. We stand behind our workmanship on every Toto service and install in Daly City. We leave the work area clean, explain what was done and why, and tell you what to watch for in the first few weeks.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Daly City
Our crew services and installs the full range of Toto fixtures that show up in Toto service in Colma and Daly City homes. We work on the Toto Drake, Drake II, and Drake Connect – still the most common Toto toilets in local mid-century homes. We handle the Eco Ultramax and Vespin II, including the Vespin II’s tight rough-in tolerances that trip up DIY installers. And we install and service the full Washlet+ line, including integrated toilets with bidet seats and the electrical work that makes them function correctly in older Daly City homes. We also handle Toto bathroom sinks, vanities to pair with new fixtures, and full shower remodels that incorporate Toto products.
We Also Service These Brands
Toto is one brand in a portfolio we know well, but it’s not the only one. Our bathroom remodels in Daly City often pair Toto fixtures with KraftMaid cabinetry, Cambria or Silestone countertops, and Kohler shower systems. That multi-brand capability means we’re not trying to sell you a brand – we’re matching materials to your budget and your house, which is how remodeling should work.
FAQs – Toto Construction Service in Daly City
That beeping usually means the Washlet+ control board or power module took a hit from a power surge, which is common in Daly City’s older electrical panels that predate dedicated bathroom GFCI circuits. We replace the damaged OEM board and, when the panel allows, run a dedicated GFCI outlet behind the toilet so the seat stops sharing a circuit with other appliances. Call (866) 505-5254 and we’ll diagnose it in one visit.
It depends on the toilet model. Some Toto toilets with a standard tank can accept a Washlet+ seat with the right mounting hardware and a dedicated electrical run. Others, especially older Drakes with nonstandard seat dimensions, are better served by a full Washlet+ integrated toilet replacement. We’ll tell you which applies to your fixture – and if a new toilet is the right move, we’ll price that honestly against a seat retrofit. Call (866) 505-5254 for an exact quote.
That’s almost always a worn flush tower seal in the Drake II, which lets water seep from the tank into the bowl and triggers phantom refill cycles. The fix is an OEM flush tower seal and usually a new fill valve at the same time. It’s a quick same-visit repair, and we see it weekly in Daly City. Call (866) 505-5254 to schedule service.
Yes. Most Toto in Visitacion Valley and Daly City homes have plumbing from the mid-century build wave – galvanized supply lines, cast iron waste stacks, and flanges that have seen better days. We handle the plumbing reality of these houses: replacing shutoff valves, resetting flanges on settled slabs, and making sure the water supply pressure is right for the Toto fixture’s fill valve. The house’s age doesn’t stop the install; it just means we budget for the plumbing work that comes with it.
A bathroom remodel in Daly City that includes a new Toto toilet, a vanity, and finishing work typically runs $9,000 to $28,000 depending on scope. A smaller bathroom refresh with just vanity installation starts around $5,000 to $12,000, while a walk-in shower installation with a Toto fixture runs $4,500 to $12,000. Here’s how the line items break down:
| Service | Typical Daly City Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (866) 505-5254 for a free estimate on your specific scope – we quote the actual job, not a brochure range.
No. We’re an independent contractor that installs and services Toto products, not a Toto-authorized service center. What that means for you: we don’t have a manufacturer relationship to protect, so our recommendations are based on what’s actually right for your Daly City home – not on what Toto wants us to sell. We use OEM parts because they’re the right parts, and we service the full Toto lineup because that’s what our customers own and ask for.
Book Your Toto Service in Daly City, CA
If your Toto toilet is running, your Washlet is acting up, or you’re planning a full bathroom remodel in Daly City with Toto fixtures at the center of it, call us at (866) 505-5254. We’ll schedule a time to look at the house, tell you what it actually needs, and give you a straight quote. Free estimates, no obligation.
Written by Noel Cabrera, Owner at Daly City Construction, serving Daly City’s fog-belt homes and hillside lots with straight-talking construction and Toto fixture expertise.