Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in San Jose, CA | Daly City Construction
We provide independent Unilock installation and repair across San Jose, from paver driveways in 95111 to retaining walls on the city’s post-war ranch parcels. The one thing that sets our Unilock work here apart is that we build every base and drainage layer for San Jose’s expansive clay soils, not for a flat, well-drained lot that doesn’t exist in most of this valley. Noel Cabrera and the Daly City Construction crew have been setting Unilock pavers and wall systems on San Jose’s infill lots long enough to know what happens when you skip that step. Call (866) 505-5254 for a free estimate on your paver driveway, patio, or retaining wall project.

Why San Jose Residents Choose Us for Unilock Service
We’re an independent installer, which means we have no loyalty to a manufacturer program when the ground under it is wrong. Unilock makes good block, that’s why we stock and install it. But the base, the drainage, the geogrid, and the joint stabilization are on us, and that’s where most paver failures in San Jose actually start. Our crew knows Brussels Block, Beacon Hill wall units, Umbriano, and the Bristol lines by name and by behavior, and we have reset enough settled driveways in 95112 and 95110 — plus handled Unilock service in Alum Rock — to read a failed base from the pattern of the rut before we even lift a unit.
Noel grew up in the Westlake district of Daly City, where fog-weathered homes taught him early that moisture barriers and solid structural attention matter more than what the finished surface looks like on day one. He brought that same thinking to hardscape work across Santa Clara County, including Unilock repair in Seven Trees: a paver driveway that heaves every wet season is a structural problem, not a cosmetic one. We repair or replace based on what the base and block actually tell us, and we use genuine Unilock units and matching cap and step pieces so colors and courses lock up with any existing work.
Styles & brands we work with







Common Unilock Construction Problems We Solve in San Jose
- Efflorescence on Brussels Block and Umbriano surfaces. The first winter rains pull mineral salts up through pavers that were laid over base that never drained properly. We see that white bloom on San Jose patios every January, most often on properties in 95111 and 95112 where the original install skipped a permeable aggregate layer under compacted clay.
- Rutting and edge settlement on paver driveways. When the sub-base was compacted for a flat-lot assumption but the valley clay beneath swells and shrinks seasonally, driveways tear under parked cars. We rebuild those bases with properly graded aggregate and geogrid, then re-set the salvaged Unilock units.
- Joint sand washout on Umbriano and Bristol patios. Open joints collect ants and let weeds through, especially after winter rains cut through plain sand. We stabilize those joints with polymeric sand so the surface stays tight through San Jose’s wet-dry cycles.
- Beacon Hill wall face spalling and cap separation. Clay-heavy lots behind walls without geogrid and drainage push the face forward and pop caps. We lift the block, rebuild the drainage and reinforcement, and re-set what has not spalled, rather than selling you a full wall when the units are still sound.
- Permit-holding paver and wall projects. San Jose’s discretionary city review can sit on a permitted hardscape project for months. We sequence the Unilock install to be build-ready the week the permit clears, not after the framing inspection, so your schedule doesn’t drag.
Unilock Service in San Jose: What Local Conditions Mean for Your Equipment
San Jose’s construction reality is shaped by the tech economy: land value so far outstrips structure value that tear-downs, lot splits, ADUs, and second-story additions on small post-war parcels are routine, and permits run through a notoriously slow, discretionary city review process. For Unilock work specifically, that means two things. First, most of our paver driveways and patios in San Jose — from Unilock service in Communications Hill to the eastside — are going onto 1950s-to-1970s ranch parcels where the original landscaping and grading were never designed for hardscape drainage, and the soil beneath is expansive clay that moves with the winter rains. Second, a permitted hardscape and ADU project can sit in the planning queue for months, so we front-load the plans and pull permits early, then sequence the paver and wall installs to be build-ready the week a permit clears rather than after the framing inspection.
On a 1950s ranch parcel off Senter Road in 95111, near where we do Unilock repair in Buena Vista, we rebuilt a rutted Brussels Block driveway whose original base had been laid straight onto expansive clay with no drainage. We pulled the units, excavated and re-compacted a proper aggregate base with geogrid, re-set the salvaged Brussels with a stabilized polymeric joint, and tied the new paver apron into the detached ADU the owners were permitted separately. The driveway now drains to the street instead of heaving each wet season. That’s the San Jose version of a paver job: work with the clay, drain to the street, and time the install to the permit, not the other way around.
Unilock Models & Products We Service in San Jose
We work with the Unilock lines that dominate San Jose residential hardscape: Brussels Block and the Brussels Dimensional System for driveways and walkways, Beacon Hill wall block for retaining walls and seat walls, Umbriano for patios and pool decks, and both Bristol Valley and Bristol London for larger paver surfaces. When a wall or driveway has good units sitting on failed base, we recommend lifting and re-setting the Unilock product rather than replacing it. When the block itself is spalled or the base is gone, replacement is the honest call. We buy genuine Unilock units and matching cap and step pieces for every repair, and we keep common San Jose colors on hand for faster turnarounds on Unilock sales & service projects. No knockoff block, no cheap joint sand.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in San Jose
The numbers below come from typical San Jose hardscape jobs we have priced and built. Your actual cost depends on site access, existing base condition, and the square footage of the Unilock surface, but these ranges will get you oriented before we walk the property. We do free estimates with a written line-item quote, and the price on that sheet is the price on the invoice. No change orders after we have agreed to the scope.
| Service | Typical Range in San Jose |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Driveway Replacement | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
Call (866) 505-5254 to schedule a free walkthrough, and we will tell you exactly what your Unilock paver or wall project costs in San Jose.
Serving San Jose, CA — Our Local Coverage Area
We’re based in the San Jose area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in San Jose
Will you repair a settled Unilock wall or tell me to replace it?
We tell you what the wall actually needs. If the Beacon Hill units are sound and the settlement is in the base or drainage layer, we lift, re-compact, re-set with geogrid and proper backfill, and re-install the caps. If the block faces have spalled and the structure has shifted, replacement is the straightforward call. Call (866) 505-5254 and we will give you an honest on-site answer.
Are you authorized by Unilock?
No. We are an independent installer. We are not authorized, sponsored, or warrantied by Unilock. What we are is a contractor who has installed and repaired enough Unilock product across San Jose service area to know how it behaves on this valley clay, and we stand behind our base, drainage, and installation work ourselves.
Do you use genuine Unilock parts or aftermarket substitutes?
Genuine. We buy real Unilock units and matching cap and step pieces so any new courses sit flush with existing work in color, texture, and shape. We do not substitute knockoff block to shave a few dollars off a quote, because the color mismatch and dimensional difference in San Jose’s mixed paver neighborhoods in 95111 or 95112 will show within a season.
Which Unilock models do you install in San Jose?
The four lines we handle most often are Brussels Block and Brussels Dimensional for driveways and walkways, Beacon Hill for walls, and Umbriano plus Bristol Valley and Bristol London for patios and larger surfaces. If you have a different Unilock line installed, we can still assess it, and we will tell you if a repair makes sense or if it is time to rethink the base.
How much does a Unilock paver driveway cost in San Jose?
Our typical San Jose paver driveway installation runs $8,260 to $21,240, with driveway replacement between $5,900 and $16,520, and paver patios in the $4,130 to $12,980 range. Site access, base condition, and total square footage move the number. Call (866) 505-5254 for a free, exact quote.
Service Areas Near San Jose
Beyond our San Jose work across 95103, 95106, 95108, and 95109, we run Unilock service into Unilock service in Campbell and Unilock service in Monte Sereno, along with surrounding communities. On larger paver and wall projects, we also serve homeowners from Daly City down through Brisbane and the valley.
Book Your Unilock Service in San Jose Today
Tell us what the house needs, not what you think it needs, and we will figure out the right fix for your Unilock driveway, patio, or wall. Call (866) 505-5254 for a free San Jose estimate. Same-day response for paver and wall repair calls in season.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Jose and the wider Bay Area.