Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in San Bruno, CA | Daly City Construction
We install, repair, and rebuild Tremron paver and retaining wall systems across San Bruno’s 94066 ZIP, from the steep west-side lots to the flat east-side tracts, and we also handle Tremron service in Millbrae. The thing that sets our Tremron work here apart is that we treat slope drainage and fog-belt moisture as the first design question, not an afterthought. If you need a Tremron driveway, patio, or wall that holds up on San Bruno’s sandy hillsides, call Daly City Construction at (866) 505-5254 for a free estimate.

Why San Bruno Residents Choose Us for Tremron Service
We’ve laid Tremron pavers, retaining-wall block, and segmental systems across San Bruno’s hilly west side and flat east-side tracts through fog season and dry season alike. As an independent installer, we buy Tremron direct, mix and match with our other hardscape and roofing lines without upsell pressure, and stand behind the work on slope stability and drainage. We’re not manufacturer-authorized, and we won’t pretend to be. What we are is a Tremron sales & service contractor who knows exactly which Tremron unit performs on a wind-scoured hillside versus a sheltered flat lot.
Noel Cabrera, our owner, grew up in Daly City’s Westlake district and trained at City College of San Francisco, then spent years on residential and light commercial jobs across San Mateo County. He’s seen what San Bruno’s fog does to hardscape that was installed without proper base prep, and he’s carried that same care to Tremron service in Brisbane. That’s the experience that shapes how we approach every Tremron job in this city.
Styles & brands we work with







Common Tremron Construction Problems We Solve in San Bruno
Here’s what we actually see on Tremron installations in San Bruno, week after week:
- Efflorescence and dark moisture staining. San Bruno sits in the coastal fog belt, and cool, damp marine air pushes through the Gap from October through May. Tremron pavers and wall block that never fully dry develop white chalky efflorescence or dark moisture blotching. We clean and seal the surface, but more importantly, we fix the drainage that keeps the block wet in the first place.
- Base failure and paver shifting on sandy hillside soils. The west side of San Bruno is built on wind-blown sand. When excavation or compaction is shorted, a paver driveway or patio shifts within a season or two. We over-excavate, compact properly, and install the base depth the slope actually requires.
- Retaining-wall block racking or bulging. Where slope creep and poor hillside drainage push hydrostatic pressure against a Tremron Westminster or Sierra wall, the block starts to lean or bow outward. We rebuild with geogrid reinforcement and drainage blankets so the wall doesn’t fight the hillside.
- Joint sand washout and edge restraint movement. Older San Bruno driveways and patios installed before current drainage standards lose their joint sand within a few fog seasons. That loose block then creeps outward because the edge restraint wasn’t built to handle wind-driven rain. We re-sand and re-set, and we address why the water was moving through the joints in the first place.
- Rebuild-era drainage mismatches in Crestmoor. After the 2010 PG&E gas-line explosion, many Crestmoor lots were rebuilt on fresh, permit-documented yards surrounded by original 1950s tracts. A new Tremron patio on one lot can flood the neighbor’s original yard because the grades don’t match. We check recorded grades before we excavate, then design for that mismatch.
Tremron Service in San Bruno: What Local Conditions Mean for Your Equipment
Here’s the thing about Tremron work in San Bruno that you won’t read on a generic manufacturer page. Because the 2010 Crestmoor Canyon pipeline explosion forced a mass rebuild, Tremron hardscape jobs in the Crestmoor neighborhood sit on newer, permit-documented lots surrounded by original 1950s tract homes. That means the rebuild-era yard and the neighbor’s yard often don’t drain the same way. We check recorded grades and utility paths before excavating a driveway or wall base, because a Tremron patio installed to the 2011 rebuild grade can send fog-season runoff straight into a 1954 yard that was never engineered to handle it. That single fact changes which Tremron products we recommend, how deep we dig, and whether we add a French drain or channel drain alongside the paver work.
Tremron Models & Products We Service in San Bruno
We work with the Tremron product lines that actually show up on San Bruno properties. That includes the Tremron Oldcastle Sierra and Westminster retaining wall block systems, the Allegro and Mega Olde Towne paver lines, and the Brussels and Cambridge interlocking paver styles, along with standard cap and corner block accessory units. We use genuine Tremron block, cap, and accessory units where color and profile matching matters, and quality aftermarket base, geogrid, and joint sand where it performs identically. On an existing Tremron wall or patio, we repair settlement and drainage first, and only recommend full replacement when the base or the wall’s structural section is genuinely compromised.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in San Bruno
Pricing for Tremron paver work in San Bruno reflects the prep and drainage work this city’s soils and fog actually demand. Here are the ranges we work within:
| Project | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
The spread depends on slope, drainage needs, access, and whether we’re removing an old surface first. A free estimate includes a site evaluation and a written, line-item quote so you’ll see exactly what the base prep, drainage, and Tremron materials cost. Call (866) 505-5254 to schedule yours.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in San Bruno
Yes, it often does. Rebuild-era yards in Crestmoor were graded to newer permit standards, and the surrounding 1950s lots were not. We check recorded grades and utility paths before excavating, then design the Tremron installation so runoff doesn’t push into a neighbor’s older yard. Call (866) 505-5254 for a site evaluation.
The short answer is that settlement, joint sand washout, and minor surface staining can usually be repaired, while a bulging wall with failed base or missing geogrid usually needs structural rebuilding. We diagnose the base condition and drainage first, then tell you straight whether repair is worth doing. Most San Bruno jobs fall on the repairable side.
We do. Fog and wind-driven mist slow curing on some materials, but paver and wall installation is not weather-dependent the way stucco or paint is. We schedule around heavy rain, but the fog itself doesn’t stop us, and fall and winter are actually good months to book because our schedule is lighter.
No, we’re an independent installer. We buy Tremron direct, and our recommendations are based on what performs on San Bruno’s slopes and fog-belt lots, not on any manufacturer authorization. That independence means we’ll tell you when a different product would do the job better, and we won’t upsell you into a Tremron line you don’t need.
Most San Bruno paver patio installations run between $3,500 and $11,000, with the biggest variables being slope, drainage, access, and whether we’re demolishing an old concrete slab first. Call (866) 505-5254 for a written, line-item quote specific to your lot. Estimates are free.
Service Areas Near San Bruno
We take Tremron hardscape projects throughout the northern Peninsula. That includes San Bruno service area coverage for Daly City, Broadmoor, Colma, and Visitacion Valley, plus coastal work in Tremron service in Pacifica and hillside Terra Nova jobs. Over the hill, we also handle Tremron service in Chinatown and nearby Noe Valley properties.
Book Your Tremron Service in San Bruno Today
We rebuilt a failing Tremron Westminster retaining wall on a stepped west-side San Bruno lot where the original installer skipped geogrid and the sandy hillside soil had crept for years, bulging the wall and washing joint sand into the neighbor’s yard. We excavated to proper depth, re-laid the block with geogrid courses and a drainage blanket, and re-set a Tremron Allegro paver patio above it so fog-season runoff now sheds away from both structures. That’s the work we do here. If your Tremron hardscape is failing on a San Bruno slope, call (866) 505-5254 for a free estimate. Tell us what the house needs, not what you think it needs, then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Bruno and the northern Peninsula since the Westlake tract-home days.