Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Construction in Highland, CA | Daly City Construction
We provide independent Owens Corning roofing and construction service across Highland, CA – tear-offs, re-roofs, repairs, and standing-seam metal work in the 92346 ZIP. What makes our Owens Corning work here different is that we plan every job around the ZIP’s split personality: flat valley-floor parcels that bake under Inland Empire heat, and foothill parcels that climb into wildland-urban-interface (WUI) fire zones with a whole different codebook. Call (866) 505-5254 for a free estimate.
Why Highland Residents Choose Us for Owens Corning Service
We’re a full-scope general contractor, not a roofing-only crew, and we’ve put Owens Corning systems on homes from the flat tracts off Baseline to the sloped lots up toward the national forest boundary. That range matters. A roof on one side of Highland needs to shed heat and hold up to Santa Ana gusts. A roof on the other side needs Class A fire assembly and ember-resistant vents. We’ve done both, repeatedly, and we plan material choices around which side of the code line your parcel sits on.
Noel Cabrera grew up in Daly City’s Westlake district watching his uncle re-frame a garage, and he trained in construction technology at City College of San Francisco before spending years on residential jobs across San Mateo and San Francisco counties. When he says our crew understands how Owens Corning materials behave under sustained heat and dry wind, it’s because we’ve fixed enough prematurely failed seal strips and buckled valley flashings to know exactly where these products work and where an installer’s shortcuts will come back to haunt a homeowner. We’re an independent contractor – not affiliated with, sponsored by, or authorized by Owens Corning. We just work with their materials every week. See our full Owens Corning sales & service page for the complete scope.
Styles & brands we work with
Common Owens Corning Construction Problems We Solve in Highland
- Premature seal-strip failure and tab lift. South- and west-facing roof planes in Highland take direct afternoon heat from spring through October, and the Santa Anas punish any shingle that hasn’t sealed properly. We see this most on roofs at or near minimum pitch, where wind-driven grit works under the tabs and breaks the seal strip early. The fix is usually localized, but it requires matching the shingle line and adhesive system correctly.
- Granule loss and algae streaking on older three-tab and Oakridge roofs. Highland’s valley-floor heat load is unforgiving, and homes with undersized attic ventilation cook shingles from both sides. Granules in the gutters after a rain, dark streaks on the north slope – those are warning signs the mat is breaking down. Depending on the roof’s age and deck condition, this is either a targeted repair or a tear-off we’ll recommend honestly after inspection.
- Flashing and fastener corrosion at wall and valley transitions. The original installer used electro-galvanized fasteners on a roof that now has to meet WUI fire-hardening detailing. We see this constantly on Highland foothill homes where ember-resistant construction retrofits uncover old non-compliant flashing work. Wrong fasteners plus dry heat cycles equals rust, and rusted flashing is where roof leaks are born.
- Shingle cracking and ridge-line separation over expansive clay soils. Parts of the Highland valley floor sit on clay that swells and shrinks with seasonal moisture. That movement transmits through slab and framing, and over time it works the roof plane out of alignment. Ridge caps separate, shingles crack at the stress lines, and a roof that looked fine ten years ago starts opening up at the transitions.
- Hidden deck rot discovered at tear-off. On Highland’s 1970s-to-2000s tract homes, a previous shingle-over job often trapped moisture under two layers of shingles. You can’t see it from the ground, but once we pull the old roof, the plywood tells the truth. We replace compromised decking before re-roofing, because putting a new Owens Corning system over soft wood is a waste of your money and our time.
Owens Corning Service in Highland: What Local Conditions Mean for Your Roof
Highland’s northern edge climbs into wildland-urban-interface fire zones inside the same 92346 ZIP that covers the flat valley floor. That means two houses on the same street name can face different scopes. A re-roof on a valley lot off Base Line typically needs a standard Owens Corning assembly: underlayment, starter strips, architectural shingles, and ridge caps, sized for heat and wind. A re-roof on a foothill parcel up toward the forest boundary needs the same shingle system, but with Class A assembly fire-hardening, ember-resistant eave and ridge vents, and flashings detailed to WUI code. Contractors who work Redlands or San Bernardino proper all week often miss that split when they bid a Highland job. They see one ZIP, assume one codebook, and under-scope the foothill work. We see the parcel elevation and the fire zone first, then we plan the materials. Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.
Owens Corning Models & Products We Service in Highland
We install and repair the full Owens Corning residential lineup: Oakridge and Oakridge Pro architectural shingles, Duration and Duration Designer series shingles, Supreme and WeatherGuard underlayments, and Owens Corning standing-seam metal roof systems. On a typical Highland job, we carry Owens Corning branded underlayment, starter strips, and hip-and-ridge accessories matched to the shingle system, because the assembly performs as designed when the components are engineered to work together. For retrofit conditions where the OEM part doesn’t fit cleanly – vents on older Highland tract homes, valley flashings on odd-angle hillside additions – we use quality aftermarket flashing and vent products rather than forcing a mismatched piece. The goal is a roof assembly that holds up, not a catalog-perfect match with a weak joint.
On a 1970s single-story stucco home up toward the foothill edge of Highland, our crew tore off two layers of aging three-tab shingles and found the original plywood decking soft along the north eave. A previous shingle-over job had trapped moisture for years. We replaced the compromised decking, installed a Class A Owens Corning Duration assembly with ember-resistant ridge and eave vents to satisfy the WUI exposure at that elevation, and re-detailed the valley flashings with new metal so the roof would shed Santa Ana-driven debris and rain correctly. The homeowner got a fire-hardened roof that passed inspection on the first walk-through.
If you’re in the broader region, we also offer Owens Corning service in Riverside. Our Highland coverage is part of a larger Highland service area footprint that spans the San Bernardino foothills and the valley cities below them.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Service Pricing in Highland
| Owens Corning Roofing Service | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation (standing seam) | $15,000 – $40,000 |
What drives cost on a Highland Owens Corning roof: the roof’s square footage and pitch, whether you’re on the valley floor or in a WUI fire zone (Class A assembly adds material and labor), the condition of the decking once we tear off the old shingles, and whether you need a full re-roof or a localized repair. A free estimate from us includes an on-site inspection, a line-item breakdown, and a straight answer about whether you need a repair or a tear-off. Call (866) 505-5254 to schedule yours – estimates are free, and we won’t upsell you a roof you don’t need.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well, and we also handle Owens Corning repair in Muscoy. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Owens Corning Construction in Highland
It depends entirely on whether your parcel falls inside Highland’s WUI fire zone, which runs along the northern foothill edge of the 92346 ZIP. Valley-floor addresses typically don’t require Class A fire-rated assembly, but foothill parcels up toward the national forest boundary routinely do. We check your parcel’s fire zone and elevation before we bid, so you’re not paying for fire hardening you don’t need – or skipping it when code demands it. Call (866) 505-5254 and we’ll verify your address.
Yes. We stage material delivery and tear-off differently on steep, narrow hillside driveways than we do on flat valley lots. It changes how we sequence delivery, where we position tear-off containment, and sometimes how we schedule the dumpster. A foothill Highland job isn’t a flatland job with a better view – it’s a different logistics plan, and we’ve run enough of them to know what works.
Granule loss means the shingle mat is oxidizing, and on Highland’s valley-floor homes the usual cause is undersized attic ventilation cooking the shingles from below. Whether we can repair it or need to replace depends on how far the granule loss has advanced and what the decking looks like. We’ll inspect first, show you photos, and tell you plainly which call is honest. Call (866) 505-5254 and we’ll set up the inspection.
We install Owens Corning standing-seam metal roof systems, and yes – metal roofing is one of the strongest choices for WUI fire-hardening compliance on Highland’s foothill parcels. Metal doesn’t ignite from drifting embers the way asphalt shingle mat can, and standing-seam panels shed debris and rain cleanly. On the valley floor, metal also holds up to the heat load better than many mid-tier shingles, but the upfront cost is higher. We walk through the material trade-offs before you commit to anything.
Most Highland Owens Corning roof replacements run between $8,000 and $20,000, with WUI fire-hardening requirements and steep hillside access pushing the job toward the upper end of that range. Metal standing-seam systems run $15,000 to $40,000 depending on size and profile. For an exact quote on your roof, call (866) 505-5254 – the estimate is free and includes a line-item scope.
Service Areas Near Highland
Our Owens Corning work covers Highland and the surrounding Inland Empire communities – Redlands, San Bernardino, Colton, Loma Linda, and Mentone. We also serve Owens Corning service in El Cerrito Corona for projects on that side of the region. If you’re on a foothill parcel in Highland or a flat lot in a neighboring city, we’ll scope it accurately for the conditions.
Book Your Owens Corning Service in Highland Today
Call (866) 505-5254 to schedule your free Owens Corning roof estimate in Highland. We’ll inspect, explain what your roof actually needs, and give you a line-item quote – same number, real answers, no runaround.
Written by Noel Cabrera, Owner at Daly City Construction, serving Highland and the surrounding San Bernardino foothill communities, including Owens Corning service in Loma Linda.