Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Bernardino, CA | Daly City Construction
We install and service Mr-Glass shower enclosures, storefront systems, and custom glass across San Bernardino, and we do it as an independent shop, not as Mr-Glass representatives. The one thing that makes our Mr-Glass work different here is that we measure every opening against what San Bernardino’s post-war tract framing and decades of unpermitted additions have actually done to the walls. Call (866) 505-5254 to schedule a free estimate.
Why San Bernardino Residents Choose Us for Mr-Glass Service
Noel Cabrera, who owns Daly City Construction, grew up in a postwar tract-home block in Daly City’s Westlake district, watching his uncle re-frame a garage and learning that real construction work starts with the structure behind the finish. That instinct carries straight into how we handle Mr-Glass enclosures: we check the wall before we measure the glass. San Bernardino’s older bathrooms, especially in the 1950s and 60s tract homes that fill 92401 and 92403, rarely have plumb, square openings anymore. Nearby, Mr-Glass repair in Muscoy faces similar challenges with postwar framing. We fix that first, then set the enclosure. It’s the difference between a shower door that glides for a decade and one that drags from week one. We use Mr-Glass OEM or exact-match extrusions and seals wherever they exist, and quality stainless aftermarket rollers and hinges where OEM hardware has been discontinued or was never the strong point. We’re fully licensed and insured, and we provide written line-item quotes before any work begins.
We’re an independent Mr-Glass service provider. That means our interest is in the fit and the seal, not in pushing a particular product line. If your glass and frame are sound, we’ll tell you to re-seal and re-hang. If the panel is chipped or drilled wrong, we’ll say so and replace it. That’s the whole job.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Bernardino
- Rollers and pivots packed with Inland Empire grit. After a Santa Ana wind event or a few months of dry inland dust, the roller tracks on Mr-Glass sliders fill with fine silt. Doors start jumping track or dragging instead of failing at the glass itself. We pull the panel, clean the extrusion channels, and replace rollers with stainless hardware that doesn’t seize the same way.
- Urethane sweeps baked brittle by triple-digit sun. South- and west-facing shower walls in San Bernardino take brutal afternoon heat. Mr-Glass sweeps and vinyl seals yellow, crack, and let water escape at the curb. We replace them with fresh material rated for sustained heat, not the cheapest vinyl on the shelf.
- Out-of-square openings in 1950s-70s tract baths. Framed and semi-frameless Mr-Glass enclosures installed into a bathroom that’s shifted half an inch leave gaps at the hinge stile. The tempered panel stresses at the cutout and the seals never seat. We re-square the opening or template the glass to the actual dimensions before hanging anything.
- Pitted and seized finishes in older rental stock. San Bernardino has a significant amount of deferred-maintenance rental property where seasonal humidity swings do real damage. Plated hinge and handle finishes pit and seize. We swap them for stainless hardware and repair the underlying seal issues rather than just polishing the surface.
- Tempered panels fracturing after years of heat cycles. Glass that has lived through hundreds of San Bernardino’s hot summer days and cool winter nights can chip at the edge or fracture spontaneously from nickel-sulfide inclusions. When that happens, the fix is a new panel, not a patch. We source Mr-Glass-compatible tempered glass cut to your exact opening.
Mr-Glass Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino is one of the few Inland Empire markets where the same service call frequently spans two housing eras on one lot. A 1950s or 60s post-war tract bath alcove sits a few feet from an unpermitted later addition or enclosed patio, and the Mr-Glass opening has to be measured against framing added decades after the original tract drawings. We see this constantly in the older core near downtown and in the neighborhoods climbing toward the foothills, where homeowners enclosed a back patio in the 1980s and ran plumbing through it years later. The same pattern shows up in Highland Mr-Glass service calls near the base of the mountains. The original wall may be an inch and a quarter out of plumb after a valve upgrade opened it up, while the newer framing is a different story entirely. If we measure to the original tract plans, the enclosure won’t close cleanly. If we measure to the visible opening without checking the framing, we inherit someone else’s mistake. So we check both. That’s what separates a Mr-Glass installation that seals from one that leaks across two different eras of construction on the same property.
Mr-Glass Models & Products We Service in San Bernardino
We work on Mr-Glass frameless sliding shower door systems, including Serenity-style 3/8-inch tempered panels, semi-frameless pivot and bi-fold enclosures, aluminum storefront systems, custom mirror and glass partition systems, and custom-cut tempered window and patio-door glass units. For San Bernardino turnaround, we keep common Mr-Glass extrusion profiles, seals, and stainless roller hardware in stock or available on short order. Where Mr-Glass OEM parts exist, we use them so the enclosure keeps its original fit. Where OEM hardware is the known weak point, we use aftermarket stainless replacements that hold up better in our heat and dust. Mr-Glass sales & service across all our markets follows the same parts philosophy.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Bernardino
The line-item ranges below reflect what we typically see across San Bernardino, including 92401, 92402, 92403, and 92404. Your final number depends on the enclosure type, the condition of the framing behind it, and whether we’re re-sealing existing glass or replacing panels.
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Our free estimate includes a check of the existing framing and an honest read on whether your Mr-Glass glass is worth keeping. Call (866) 505-5254 to schedule yours.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Bernardino
Dust. San Bernardino sits in the dry Inland Empire, and after a few months of heat and Santa Ana wind, fine grit packs into the roller tracks on Mr-Glass sliders. The rollers stop spinning, the door drags, and eventually it jumps track. The fix is pulling the panel, cleaning the extrusion channels, and replacing the rollers, usually with stainless hardware that resists the same buildup. Call (866) 505-5254 and we’ll take a look.
Yes, but the wall comes first. Most of those tract bathrooms have shifted over the decades, and the opening is rarely square anymore. We re-square the studs, reset the blocking, and template the Mr-Glass panel to the corrected dimensions. Our Rialto Mr-Glass service follows the same wall-first approach. If someone tries to hang a frameless enclosure on a wall that’s an inch out of plumb, the seals gap and the glass stresses. We don’t do that.
Not directly, but the same dry heat and wind that drive wildfire risk also bake seals and sweeps on south- and west-facing shower walls. The practical effect is that vinyl parts fail faster in San Bernardino than they would closer to the coast. We spec heat-rated seals and stainless hardware for exactly that reason.
Usually, yes. We measure the opening as it actually exists, not as the original tract drawings say it should be. The key is checking the framing that the enclosure will hang on, especially where an enclosed patio or later addition changed the bathroom’s footprint. If the framing is sound and the opening can be squared, we proceed. If there’s a structural issue, we’ll tell you before any glass gets cut. Call (866) 505-5254 for an assessment.
The tempered glass panels are functionally similar across major manufacturers, but Mr-Glass extrusions, seals, and hardware are specific to the brand. That’s why we use Mr-Glass OEM or exact-match parts where they exist: the enclosure keeps its original fit. If OEM hardware is discontinued or was the weak point, we move to quality stainless aftermarket parts instead. The glass itself is 3/8-inch tempered for most frameless Mr-Glass lines, and that’s the spec we match.
Service Areas Near San Bernardino
Beyond San Bernardino proper, our crews regularly handle Mr-Glass work in Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane. If you’re in one of those areas, the same framing-first approach applies. See our full San Bernardino service area coverage. For the Inland Empire corridor specifically, we also offer Mr-Glass service in Rubidoux and Mr-Glass service in Colton.
Book Your Mr-Glass Service in San Bernardino Today
If your Mr-Glass enclosure is dragging, leaking, or just not sealing the way it should, call (866) 505-5254. We’ll send someone out, check the wall, check the glass, and give you a straight answer on what needs to happen next. Estimates are free.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Bernardino and the surrounding Inland Empire with independent Mr-Glass service and installation.