Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Palm Springs, CA | Daly City Construction
We’re Daly City Construction, and we provide independent Mr-Glass construction service across Palm Springs, ZIP codes 92262, 92263, 92264, and 92292. The thing that makes our Mr-Glass work different here is that we know Palm Springs homes aren’t just old, they’re often protected. That means the glass you replace has to match what preservation review allows. Call (866) 505-5254 for a free estimate on any Mr-Glass shower enclosure, closet door, or custom glass panel.
Why Palm Springs Residents Choose Us for Mr-Glass Service
Noel Cabrera, our owner, grew up around postwar tract homes and learned early that a square opening beats a clever workaround. That matters here because Palm Springs Mid-Century homes are rarely square anymore. Slab-on-grade construction shifts. Walls drift. A factory-templated Mr-Glass panel drops into a wall that’s an inch out of plumb and suddenly the door swings on its own. We measure for what the house actually is, not what the template assumes.
We’re also not a factory-authorized dealer, and we say that plainly. We’re an independent construction and glazing outfit. That means when we spec a Mr-Glass hinge or sweep, we’re choosing it because the panel geometry demands it, not because a manufacturer told us to. Full disclosure, every time. Same phone from quote to install: (866) 505-5254.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Palm Springs
- Pivot and hinge hardware pitting and seizing. Palm Springs interiors cycle from 110°F days to cool nights, and desert water runs mineral-heavy. Mr-Glass pivot doors that once swung freely start dragging, then chip at the panel edge when someone forces them. We replace with OEM or coated stainless hardware that handles the heat and the water chemistry.
- Doors swinging open on their own or leaving a weep gap. Mid-Century slab-on-grade floors creep. A Mr-Glass panel installed against an out-of-plumb wall will drift open or leave a sweep gap that tracks water onto the slab. We re-hang to the actual opening, not the original template.
- UV-degraded vinyl sweeps and gaskets. West- and south-facing baths in Palm Springs get hit with direct afternoon sun through clerestory glass. Vinyl seals yellow, crack, and fail years faster than they would in coastal California. We stock quality replacements and swap them before they start leaking into the slab.
- Wind-driven sand in bypass door tracks. Homes near open desert edges, especially up against the alluvial fan, catch fine grit every time the wind kicks up. Mr-Glass sliding bypass shower and closet door tracks grind, rollers wear, glass scratches. We clean, re-roll, and when the track is shot, we replace it properly.
- Chip-at-the-hinge failures on frameless panels. Once a heavy Mr-Glass panel chips at a pivot point from years of forced swings against misaligned hardware, that panel is done. No bargain repair fixes tempered glass with a chip near a stress point. We order new custom-cut glass and hang it on hardware rated for the load.
Mr-Glass Service in Palm Springs: What Local Conditions Mean for Your Equipment
Palm Springs enforces its historic preservation ordinance on individual Mid-Century homes. In designated neighborhoods, even swapping a bathroom window or re-glazing a clerestory band can require design review approval before a permit is filed. That means the glass profile and visible frame details have to be specified like-for-like. You can’t just throw any window in and call it done. A contractor who files before checking the designation risks a stop-work order and a re-do at the homeowner’s cost. We check the designation first. We know which ZIP codes trigger review, and we spec Mr-Glass panels and window profiles that match the original design vocabulary so the permit clears without a fight. That’s not a service detail, it’s the whole job in this city.
Noel learned this on a Sunmor estate home off East Tachevah a few summers back. We opened a 1960s tub alcove to build a curbless walk-in shower and found the original slab pitched toward the tub drain, with walls out of plumb by nearly an inch over the run. We re-leveled with a mud-set curb, upgraded the valve while the wall was open, and templated a custom frameless Mr-Glass enclosure to the actual opening rather than forcing a stock kit. Then we spec’d coated stainless hinges, because that west wall bakes all afternoon and cheap hardware would’ve pit within two summers. That’s what we mean when we say the house decides the fix.
Mr-Glass Models & Products We Service in Palm Springs
We work on Mr-Glass frameless shower enclosure systems in both ½-inch and ⅜-inch tempered panels, including pivot and hinge door configurations. We service Mr-Glass sliding bypass shower door kits, which are common in smaller Palm Springs guest baths and casitas. We also handle Mr-Glass mirrored closet and wardrobe door systems, plus custom-cut Mr-Glass window and mirrored wall panels for retrofits where the original glass is not salvageable. For parts, we use OEM Mr-Glass hinges, pivots, handles, and sweeps wherever the panel geometry depends on them. Where OEM finishes have been discontinued, we source quality aftermarket stainless hardware, never bargain-bin hinges on heavy glass. We carry common parts locally to keep Palm Springs turnaround fast, and we order custom glass direct when a panel has to be cut to an opening that hasn’t been square since Nixon was in office.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Palm Springs
Here’s what Mr-Glass work typically costs in Palm Springs. These are installed ranges, not just material numbers.
| Service | Typical Installed Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Window Replacement | $4,500 – $15,000 |
What drives the cost in Palm Springs specifically is whether the structure has moved, whether the opening triggers preservation review, and what the hardware finish needs to be to survive desert heat and hard water. Our free estimate includes a site measurement, an honest read on the opening, and a line-item quote. Call (866) 505-5254 and we’ll get you numbers that match your house, not a template.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Palm Springs
Yes. Clerestory and full-height glass are core to Mid-Century modern vocabulary in Palm Springs, and we regularly re-glaze, retrofit, and rebuild these openings. The first step is checking whether the property falls under the historic preservation ordinance. In designated neighborhoods, the replacement glass and visible frame details must match the original profile. We spec like-for-like before filing, which clears the design review cleanly. If your clerestory glass is cracked, fogged, or leaking during monsoon season, call (866) 505-5254 and we’ll walk you through what’s possible under the local rules.
No, we’re independent. We’re a licensed General Contractor in Palm Springs with construction and glazing experience across the Coachella Valley, not a factory-authorized Mr-Glass dealer. Being independent means we’re not pushed to sell specific product lines. We spec Mr-Glass where it fits the opening and the preservation requirements. That’s a better position for homeowners in Palm Springs than a showroom sales rep who’s never let a desert afternoon teach them anything.
Yes, where the hardware matters. We use OEM Mr-Glass hinges, pivots, handles, and sweeps when the panel geometry depends on them. If an OEM finish has been discontinued, we move to quality aftermarket stainless or coated stainless hardware rated for the heat and water chemistry in Palm Springs. We won’t hang a heavy glass panel on bargain-bin hinges. That’s how panels chip and people get hurt on tempered glass.
Most standard replacements go from template to finished install in 7 to 14 days, depending on whether custom glass has to be cut and whether any subfloor or wall prep is needed. Preservation review, if triggered, can add time to the front end, so we start the check early. For a realistic timeline on your specific opening, call (866) 505-5254 and we’ll give you an honest read after a site visit.
If the failure is hardware, a seal, or alignment, repair usually runs a few hundred dollars. If the glass is chipped at a hinge, deeply etched from years of hard-water buildup, or the opening has moved, replacement is the right call, and a frameless enclosure typically ranges from $4,500 to $12,000 installed in this market. We’ll tell you which one your situation needs. Estimates are free. Call (866) 505-5254.
Service Areas Near Palm Springs
We serve Palm Springs and the surrounding Coachella Valley. For Mr-Glass service in the western end of the valley, see Mr-Glass service in Desert Edge. For work up-valley, see Mr-Glass service in Cathedral City. We also cover Cathedral City, Rancho Mirage, Desert Hot Springs, and the Racquet Club estates. If you’re not sure whether your home triggers preservation review, call us before you pull a permit.
For broader coverage details, see our Palm Springs service area page. For the full picture of our Mr-Glass sales and service options, start with Mr-Glass sales & service.
Book Your Mr-Glass Service in Palm Springs Today
Tell me what the house needs, not what you think it needs, and we’ll figure out the right fix. That’s how Noel runs every job. If your Mr-Glass enclosure is dragging, leaking, or just looks like 1963 wants it back, call (866) 505-5254 for a free estimate. We’ll measure, check the preservation status, and give you numbers that hold.
Written by Noel Cabrera, Owner at Daly City Construction, serving Palm Springs and the Coachella Valley with independent Mr-Glass construction and glazing work.