Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Moss Beach, CA | Daly City Construction
We provide independent Mr-Glass service across Moss Beach, from frameless shower enclosure retrofits to mirrored wardrobe door replacement. What makes our Mr-Glass work different here comes down to the salt air: ocean-facing glass hardware in Moss Beach corrodes and seizes years before the same parts fail just a few blocks inland. We spec marine-grade stainless and sealed edges on exposed lots, and we don’t waste your money doing it on sheltered ones. Call (866) 505-5254 for a free estimate.
Why Moss Beach Residents Choose Us for Mr-Glass Service
Noel Cabrera grew up in the Westlake district of Daly City, where he spent summers watching his uncle re-frame a garage and learned early that coastal construction punishes shortcuts. He trained in construction technology at City College of San Francisco and has spent years on residential jobs across San Mateo and San Francisco counties. That hands-on background matters in Moss Beach, where a Mr-Glass enclosure that would hold up fine in Mr-Glass in Half Moon Bay or San Bruno can start pitting within two fog seasons here.
We’re an independent contractor, not authorized or sponsored by Mr-Glass. That independence cuts both ways: we’re free to tell you when an original plated hinge is the problem, and free to step you into marine-grade stainless or a better aftermarket part when the OEM piece keeps failing. Our Mr-Glass sales & service approach is built on matching the hardware to the actual exposure, not to a catalog photo. Most Moss Beach jobs we handle start with a simple question: does the glass itself still have life, or are we throwing parts at an enclosure that needs full replacement?
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Moss Beach
- Pitted and seized hinge hardware. Plated Mr-Glass pivot hinges and wall-mount brackets take a beating from salt-laden onshore wind. On ocean-facing lots, the finish starts pitting within a season or two, and eventually the hinge freezes solid. We replace with marine-grade stainless where the lot demands it.
- Fog-driven edge seal failure. Mr-Glass frameless enclosures rely on silicone joints and edge seals that degrade faster under Moss Beach’s constant fog moisture. Water tracks behind the panels, stains the surround, and rots the framing if it’s been going on for years. We correct the substrate, re-seal with marine-rated silicone, and only then re-set the glass.
- Salt-loaded sliding door tracks. Mr-Glass sliding shower door rollers and bottom tracks collect salt film and grit. Doors start jumping or dragging. The track itself can corrode through. We clean or replace rollers and match new track hardware to the door weight, not just whatever was there before.
- Mirrored door edge discoloration. Moss Beach beach cottages hold dampness through the fog season, and Mr-Glass mirrored wardrobe door backing and edge silvering discolors at the edges when the closet sits damp. If the silvering is gone, we replace the door set; if it’s early, we address ventilation before it spreads.
- Rot behind the glass. Plenty of older Moss Beach homes have bathrooms that were never waterproofed behind the surround. We regularly find dry rot in the framing behind a failing enclosure, which means the Mr-Glass panel itself isn’t the problem, but everything holding it is.
Mr-Glass Service in Moss Beach: What Local Conditions Mean for Your Equipment
Moss Beach’s ocean-facing lots take onshore wind and salt fog head-on. That’s the single biggest variable in how a Mr-Glass enclosure or mirrored door set performs here, and it’s the line we draw on every job. On the west side of town, off streets like Cypress Avenue, galvanized and even stainless fasteners pit and fail years earlier than inland. Original beach-cottage decks and rim joists often look fine until you probe them and find dry rot from decades of fog-borne moisture. The same logic applies to Mr-Glass hardware: we’ve pulled plated hinges off Moss Beach enclosures that were frozen solid after two or three seasons, while the identical hinge on a sheltered lot a few blocks east still worked.
That’s why we spec marine-grade stainless hinges, sealed edges, and proper substrate waterproofing on exposed Moss Beach jobs and don’t on sheltered ones. It’s not a brand defect. It’s an environment mismatch. Our Moss Beach service area coverage means we see this pattern every week, and we’ve learned which upgrades actually buy years and which just add cost.
On a mid-century beach cottage off Cypress Avenue in the 94038, the owners wanted a frameless Mr-Glass enclosure but the original bath had no proper waterproofing behind the surround. Our crew pulled the old unit, corrected the substrate and slope, then set the 10mm panels on marine-grade stainless hinges. The previous plated hardware had already pitted and frozen solid from years of fog-driven moisture. The glass was fine. The hardware wasn’t.
Mr-Glass Models & Products We Service in Moss Beach
We service the Mr-Glass lines that show up most often in Moss Beach homes: frameless shower enclosures with 10mm tempered panels and wall-mount hinges, sliding shower door systems with polished or brushed hardware, mirrored closet and wardrobe door sets, and custom glass railing and balustrade panels for decks. When original Mr-Glass hinges, rollers, and seals are still available, we match OEM. When the plated parts are the thing that keeps failing, we step to marine-grade stainless or higher-quality aftermarket hardware. We stock common replacement hardware locally, so Moss Beach turnaround on straightforward repairs usually doesn’t require a parts order. If panels are chipped, delaminated, or the surrounding framing is rotted, we’ll tell you replacement makes more sense than more parts.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Moss Beach
Mr-Glass work in Moss Beach spans a wide range because some jobs are a hinge swap and others are a full enclosure re-set with substrate correction. Here are the project tiers we quote most often:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives the cost on a Moss Beach job is whether we’re working with sound framing or correcting rot and waterproofing behind the glass. A free estimate includes a look at the enclosure hardware, the substrate, and the actual exposure on your lot. Call (866) 505-5254 for an exact quote. Estimates are free.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Moss Beach
The short answer is ventilation first, sealing second. Moss Beach’s persistent fog means bathroom air stays damp all year, so a Mr-Glass enclosure mildews wherever air can’t move and water can’t drain. We correct bathroom ventilation, re-seal panel edges with marine-rated silicone, and make sure weep paths are clear.
No. We’re an independent contractor. That means we quote honestly on what your existing Mr-Glass glass and framing can actually take, and we choose parts based on how they’ll perform on your specific Moss Beach lot, not on what a manufacturer program promotes.
We use OEM hinges, rollers, and seals where they’re still available and appropriate. When the original plated parts are what keeps failing under Moss Beach salt exposure, we recommend marine-grade stainless or higher-quality aftermarket hardware instead.
Most hinge, roller, and seal repairs are done in one visit if the glass is sound and we’re not chasing rot. When substrate correction or waterproofing is needed, the job runs longer because we’re fixing what’s behind the glass, not just bolting parts back on. Call (866) 505-5254 and we’ll give you a realistic timeline after we see the enclosure.
We work on frameless shower enclosures with 10mm tempered panels, sliding shower door systems, mirrored closet and wardrobe door sets, and glass railing or balustrade panels. If it’s a Mr-Glass glass or glazing product in a Moss Beach home, or if you need Mr-Glass in Pacifica, we’ll likely service it.
Replacing pitted hinges or a corroded track on a Mr-Glass enclosure typically falls at the lower end of our shower repair range, around $400 – $1,800 depending on parts and labor. Full shower replacement runs $3,000 – $8,500, and a walk-in installation $4,500 – $12,000. The best way to get a real number is a free estimate. Call (866) 505-5254.
Service Areas Near Moss Beach
We cover Moss Beach and the surrounding coastal and peninsula communities, including Mr-Glass service in El Granada and Mr-Glass service in Highlands-Baywood Park. We also handle Mr-Glass work in Half Moon Bay, Montara, and Pacifica, where the same salt-fog exposure patterns apply.
Book Your Mr-Glass Service in Moss Beach Today
If your Mr-Glass enclosure hardware is pitting, your sliding doors are dragging, or the glass is sound but everything around it is failing, call (866) 505-5254. We’ll come out, assess the exposure, and tell you what the house needs, not what we want to sell you. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Moss Beach, Mr-Glass in Montara, and the San Mateo coast.