Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Day Valley, CA | Daly City Construction
We provide independent Mr-Glass service, installation, and repair across Day Valley, CA, from framed shower enclosures to custom glass doors and panels. What makes our Mr-Glass work different here comes down to one thing: Day Valley is a steep, wooded canyon community on wells and septic systems, not a flat-lot suburb, and that changes how glass enclosures fail, how they’re installed, and what it takes to make them last. We’re a full-scope general contractor, not a manufacturer affiliate, so our Mr-Glass recommendations come from job-site experience, not a factory script. Call (866) 505-5254 for a free estimate on any Mr-Glass project in Day Valley.
Why Day Valley Residents Choose Us for Mr-Glass Service
We’ve worked Mr-Glass products on Day Valley’s canyon parcels long enough to know the difference between a simple roller swap and a structural problem hiding behind a cracked glass panel. The distinction matters here, because older redwood-and-cedar mountain cabins shift seasonally on expansive clay and slide-prone slopes, and that movement shows up first in glass enclosures and mirrored units. Noel Cabrera, our owner, grew up in Daly City’s Westlake district watching his uncle re-frame a garage, then trained in construction technology at City College of San Francisco before years of residential and light commercial work across San Mateo and San Francisco counties. That background means we approach Mr-Glass repair the way a framer approaches a wall: check what’s underneath before touching what’s on top. When you call us for Mr-Glass service in Day Valley, you get a contractor who understands both the glass systems and the structure holding them.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Day Valley
Here’s what we routinely fix on Mr-Glass units throughout Day Valley:
- Seized rollers and pitted bottom tracks. Day Valley homes run on well water, and that water is hard and mineral-heavy. The scale etches glass and builds up on framed shower-door rollers, causing them to seize and grind. We replace worn rollers with OEM Mr-Glass hardware where available, then clean and refit the track so the door glides instead of dragging.
- Cracked tempered glass from wall movement. Seasonal wet-dry cycles on steep, slide-prone slopes make older cabin walls shift. When the rough opening racks out of square, the glass takes the stress. We re-square the opening before installing new Mr-Glass panels, so the glass isn’t fighting the frame.
- Loose semi-frameless hinges and chipped glass edges. On cabins with aging framing and piecemeal additions, hinges pull and glass edges chip. We address the rough opening first, then mount fresh Mr-Glass hardware to hold the enclosure properly.
- Failed seals and sweeps. Fog-drip humidity and repeated wet-dry winter cycles degrade Mr-Glass door seals and sweeps quickly in Day Valley. Water escapes onto subfloors that are often already aging and non-conforming, so prompt seal replacement matters more here than in drier inland areas.
- Mirrored closet and vanity glass cracking. Foundation and framing movement in piecemeal-repaired cabins travels through walls and into mirrored units. We assess the underlying movement before recommending repair or replacement, because gluing a cracked mirror onto a shifting wall never ends well.
Mr-Glass Service in Day Valley: What Local Conditions Mean for Your Equipment
The one fact about Day Valley that changes almost every Mr-Glass job is the water. Because these parcels sit on wells and septic systems rather than municipal water, Mr-Glass shower glass and hardware here deal with hard, mineral-heavy well water that etches and scales glass far faster than the treated municipal water in neighboring Aptos. That’s not a small detail, it’s the difference between a shower enclosure that lasts a decade and one that looks dull and fights you every morning after three years. On a heavily treed parcel off Valencia Road, our crew replaced a failing Mr-Glass framed sliding shower enclosure in an aging cedar cabin. The bottom track had pitted and the rollers seized from years of hard well water, and the seasonal wall movement had cracked one tempered panel. We re-squared the rough opening, installed a new Mr-Glass semi-frameless unit with upgraded rollers and a fresh seal, and the homeowner finally had a door that glided and stayed dry. In Day Valley, glass work isn’t a cosmetic trade, it’s a water-chemistry and slope-stability trade.
Mr-Glass Models & Products We Service in Day Valley
We service and install the full range of Mr-Glass residential glass products found in Day Valley homes. That includes Mr-Glass framed shower enclosures, both semi-frameless and framed sliding-door units common in mountain-cabin baths, Mr-Glass custom glass shower doors and panels, Mr-Glass mirrored closet and vanity glass, and Mr-Glass window and patio-door glass. For parts, we fit OEM Mr-Glass hardware, rollers, hinges, handles, seals, wherever it’s still available, so the enclosure holds to its original tolerances. When OEM parts are discontinued, we source quality aftermarket equivalents that match the spec. We stock common Mr-Glass rollers, seals, and hardware locally so most Day Valley service calls don’t stall waiting on a shipment. Walk-in shower installation and shower replacement are two of our highest-volume Mr-Glass sub-services in the area, because many of these older cabins were built before semi-frameless enclosures became standard.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Day Valley
| Mr-Glass Project | Typical Day Valley Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
Four things drive the cost: whether we’re re-squaring an opening, whether the glass is tempered or standard, whether OEM or aftermarket hardware makes sense, and whether the existing pan or base can be reused. A free estimate includes an on-site check of the opening, the plumbing, and the existing Mr-Glass unit so you get a written line-item quote, not a ballpark guess. Call (866) 505-5254 to schedule yours.
Serving Day Valley, CA — Our Local Coverage Area
We’re based in the Day Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Mr-Glass Construction in Day Valley
Are you authorized or affiliated with Mr-Glass?
No. Daly City Construction is an independent Mr-Glass service provider. We install, repair, and replace Mr-Glass products based on job-site experience with the brand’s enclosures, hardware, and glass, not on any manufacturer authorization.
Do you use OEM Mr-Glass parts for repairs?
We use OEM Mr-Glass hardware, rollers, hinges, handles, and seals, whenever they’re still available from the manufacturer or our parts network. When an OEM part is discontinued, which happens with older framed enclosures, we source quality aftermarket equivalents that match the original tolerances and tell you which one we’re using before we install it.
Do you handle the permit side of a shower or glass project in unincorporated Day Valley?
Yes. Day Valley sits in unincorporated Santa Cruz County, so shower and glass projects that touch plumbing, structural openings, or waterproofing run through county building permits, plus fire-safe and erosion-control requirements tied to WUI and hillside rules. We pull the permits, coordinate inspections, and make sure the work passes, so you’re not left explaining a DIY glass swap to a county inspector.
How long does Mr-Glass service take in Day Valley?
A straightforward roller, seal, or hinge replacement usually takes under two hours on site. A full shower replacement or walk-in installation typically runs one to three days depending on whether the opening needs re-squaring and whether custom glass panels have to be ordered. Seasonal access and mud during winter storms can occasionally push scheduling, but we factor that into the timeline when we give you the quote. Call (866) 505-5254 for a current schedule estimate.
What does it cost to replace a Mr-Glass shower enclosure in Day Valley?
Shower replacement in Day Valley typically ranges from $3,000 to $8,500, while a tub-to-shower conversion runs $3,500 to $10,000 and a walk-in shower installation falls between $4,500 and $12,000. The range depends on glass type, hardware grade, and whether we’re fixing an out-of-square opening before the install. Call (866) 505-5254 for an exact line-item quote, estimates are free.
Service Areas Near Day Valley
We serve Day Valley and the surrounding communities. For a closer look at our Mr-Glass work, see Mr-Glass sales & service, our Day Valley service area page, Mr-Glass service in Soquel, and Mr-Glass service in Twin Lakes. We also cover Aptos, Corralitos, and other nearby Santa Cruz County communities.
Book Your Mr-Glass Service in Day Valley Today
If your Mr-Glass shower door is grinding, leaking, or cracked, call (866) 505-5254 today. We’ll schedule a free estimate, check the opening and the hardware, and give you a written quote before any work begins.
Written by Noel Cabrera, Owner at Daly City Construction, serving Day Valley and the surrounding Santa Cruz Mountains.