Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Chinatown, CA | Daly City Construction
We install, reface, and rebuild KraftMaid cabinetry across Chinatown on a regular basis. We’re the crew that shows up when a sink base has swollen from a slow leak in a Stockton Street unit, or when thermofoil doors have lifted in a kitchen with no exterior wall for a vent. Daly City Construction is an independent contractor, not a KraftMaid dealer or authorized shop, and you can reach us at (866) 505-5254 for a straight read on whether your cabinets should be repaired or replaced.
Why Chinatown Residents Choose Us for KraftMaid Service
KraftMaid is one of the most common cabinet lines we see in Chinatown’s older apartment buildings and mixed-use storefronts, and that matters. We know which series hold up in a damp, fog-prone unit and which ones start to fail at the toe kick or the sink base after a decade. Our team has pulled apart enough KraftMaid boxes in tight early-1900s kitchens to know exactly how the face frames behave when the building has settled and the walls are out of square.
Noel Cabrera runs our crews, and he grew up in the Westlake district of Daly City watching his uncle re-frame a garage one summer, deciding that was the work he wanted to do with his hands. He trained in construction technology at City College of San Francisco, then spent years on residential and light commercial jobs across San Mateo and San Francisco counties. When a Chinatown kitchen throws a problem at us, the answer usually starts with him standing in it, looking at how the building is actually built. His line is: “Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.”
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Chinatown
- Swollen sink base and toe kick boxes. Particleboard and MDF on KraftMaid’s lower-cost series swell fast when a supply line drips slowly or fog-season condensation sits unnoticed. We see this most often in ground-floor units above Chinatown shops, where the conversion from retail to residential left plumbing runs awkward and hard to inspect.
- Peeling thermofoil and laminate door faces. In kitchens with little exterior wall area for a proper vent, humidity has nowhere to go. The laminate edges on lower-cost KraftMaid series lift and peel here faster than in units with cross-ventilation, and we re-hang or replace those doors routinely.
- Binding drawer glides and hinges after settling. Older KraftMaid installs in soft-story wood-frame buildings flex and rack before the mandatory retrofit happens. Drawers that once slid cleanly start to bind, and doors that used to close flush go off-kilter. We replace glides, re-align hinges, and re-square the face frames where the building has moved.
- Misaligned inset and full-overlay doors. Brick-and-wood-frame buildings in Chinatown don’t have square wall openings, period. If a KraftMaid run was installed with sloppy shimming, the face frames get stressed and the doors never sit right. We pull the run, re-shim properly, and reset the doors so they close the way they should.
- Mismatched replacement pieces. Homeowners sometimes order a single KraftMaid door or drawer box from a big-box supplier and discover the finish or profile doesn’t match their older series. We source OEM KraftMaid parts that actually correspond to your line, and we tell you plainly when a match isn’t possible.
KraftMaid Service in Chinatown: What Local Conditions Mean for Your Equipment
Here’s the part most cabinet installers don’t tell you about working in Chinatown. Because so many Grant and Stockton buildings are family-association-owned with ground-floor retail below, a KraftMaid kitchen install often has to be staged through a shared rear stair or alley with no on-street loading at all. The unit above a shop may also trigger seismic or accessibility upgrades the moment you pull the remodel permit. That changes the whole job: it’s not just swapping boxes and doors, it’s sequencing load-in around a shop’s business hours, protecting a shared stair, and sometimes coordinating with the city on the retrofit scope before cabinetry work even starts. On a Waverly Place building with retail at grade and apartments above, our crew replaced a swollen KraftMaid Vantage sink base and re-hung peeling thermofoil doors in a third-floor kitchen, then re-squared the face frames with Mission District KraftMaid service experience when needed. shims against the settling wood-frame wall. We hand-carried every cabinet through the narrow alley and rear stair because there was no street staging, and coordinated the load-in windows around the ground-floor shop’s hours. That’s normal for Chinatown, and it’s exactly the kind of job a crew that only does suburban installs would struggle with.
KraftMaid Models & Products We Service in Chinatown
We work on the KraftMaid lines most common in Chinatown’s rental and owner-occupied units: Vantage, Prelude, and Momentum, along with the Cottage and Traditional door styles in maple and painted finishes. For parts, we source OEM KraftMaid doors, drawer boxes, and hinge and glide hardware when we’re matching an existing series. Where OEM parts are discontinued or priced out of proportion, we use quality aftermarket soft-close hardware instead, and we’re upfront about which one you’re getting. We don’t stock every profile in the truck; there are too many, but we order fast and plan the job so you’re not waiting on a part that should have been caught in the estimate.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Chinatown
What you’ll pay depends on whether we’re re-hanging doors, replacing a run, or doing a full kitchen remodel. Here are the ranges we quote in Chinatown for KraftMaid work:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number: whether we’re refacing or replacing full runs, whether the building requires seismic or accessibility upgrades as part of the permit, and how difficult the load-in is. A free estimate includes a written line-item quote, and it’s the only way to get a real number for your specific unit. Call (866) 505-5254 to schedule yours.
Serving Chinatown, CA — Our Local Coverage Area
We’re based in the Chinatown area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Chinatown
Yes. We stage through shared rear stairs, alleys, and service entrances when there’s no street loading, and we coordinate around ground-floor shop hours. It changes the labor and timeline, but it’s a normal part of how we work in Chinatown. Call (866) 505-5254 and we’ll walk the building with you before quoting.
If the thermofoil or laminate is lifting on a lower-cost series and the substrate is still solid, re-hanging or replacing the door faces makes sense. If the box behind it is swollen or delaminating, you’re usually better off replacing that cabinet run entirely. We’ll give you an honest answer either way, and the estimate is free.
It often does. San Francisco’s mandatory soft-story and URM retrofit ordinances apply to many pre-1970s buildings in Chinatown, and even a minor remodel can trigger Planning Department review for historic resources. We also handle KraftMaid repair in Noe Valley with the same retrofit awareness. We sequence the cabinet work around whatever retrofit scope the city requires so you’re not redoing work later. Call (866) 505-5254 for a straight read on your building.
Yes, but only if the installer actually shims and re-squares the face frames, and that’s where cheap installs fail. We re-shim runs properly against brick-and-wood-frame walls so doors close flush and drawers don’t bind. It’s slower work, but it’s the only way a KraftMaid run survives in an old Chinatown building.
Sometimes. If your series is still in production or we can source OEM parts for the matching door profile and finish, we can match it closely. If the series is discontinued and no OEM match exists, we’ll show you the closest aftermarket options and tell you what the mismatch will look like before you spend a dollar. Call (866) 505-5254 and we’ll identify your series from photos.
Service Areas Near Chinatown
We work throughout the Bay Area, including Chinatown service area coverage plus Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane. For KraftMaid-specific work, see also KraftMaid service in Millbrae and KraftMaid service in Burlingame. If you’re planning larger cabinet or kitchen work, check KraftMaid sales & service for the full scope of what we handle.
Book Your KraftMaid Service in Chinatown Today
We give you a straight answer, a written line-item quote, and a crew that knows how to work in Chinatown’s old buildings without making the job harder than it already is. Call (866) 505-5254 to book your free estimate, and we’ll walk the unit with you before anything gets ordered.
Written by Noel Cabrera, Owner at Daly City Construction, serving Chinatown, KraftMaid in Visitacion Valley, and the wider Bay Area.