Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Orange, CA | Daly City Construction
We provide independent Jerith fence installation and repair throughout Orange, and the one thing that separates our work here from anywhere else is Old Towne. Front-yard fence lines in the Historic District pass through the city’s design review board, which means a Jerith ornamental aluminum or vinyl picket run isn’t just a fence decision. It’s a preservation decision. If you own a Craftsman or Victorian in the 92866 ZIP and need Jerith service that actually clears historic review, call (866) 505-5254. We’re Daly City Construction, a General Contractor – Orange led by Noel Cabrera, and we’ve been working Orange’s older neighborhoods long enough to know the difference.

Why Orange Residents Choose Us for Jerith Service
Most fence contractors can dig a post hole. Fewer can tell you which Jerith panel profile reads period-correct on a 1920s Craftsman, which footing depth holds in Orange’s expansive clay, and which aluminum finish survives the Santa Ana wind corridor without powder-coat bloom at the cut ends. We can, because we’ve done it. Noel Cabrera got his start framing fog-weathered homes on the San Francisco Peninsula, then spent years on residential and light commercial jobs before landing in Orange County’s fencing market. He’ll tell you the same thing he tells every homeowner: “Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.”
We’re not a Jerith dealer. We’re an independent contractor that installs and repairs Jerith systems because they hold up where other vinyl and aluminum lines don’t. We source genuine Jerith posts, caps, panels, and gates when the profile is current, and we match to quality aftermarket sections only when a style has been discontinued. You get the right part, not the convenient one. And we cover all four Orange ZIPs: 92865, 92866, 92867, and 92868.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Orange
- UV chalking and color fade on west- and south-facing vinyl panels. Orange gets intense inland sun, and Jerith vinyl panels that face the afternoon heat for five or six summers start to chalk. We see it most on privacy runs along east-west lot lines in the 92865 tract neighborhoods. The fix is often localized panel replacement, not a full run, unless the vinyl has gone chalky to the core.
- Post lean and footing heave where vinyl posts were set shallow in expansive clay. Orange’s soil cycles through wet winters and dry summers, and it moves. A Jerith vinyl post set at 18 inches will lean within a few years in the clay pockets near the 55. We pull the post, drill deeper, and set it in concrete below the movement zone.
- Racked aluminum panel distortion and gate sag on grade changes. Jerith ornamental aluminum can be racked for slopes, but a lot of installers force a level panel across a grade change instead of stepping or racking it properly. The result is a twisted middle rail and a gate that binds. We see it on hillside lots on Orange’s eastern edge.
- Corrosion bloom at cut ends and welds on aluminum pickets. In hillside ember-zone yards, where stainless fasteners weren’t used, the powder coat fails first at the cuts. It starts as a chalky white bloom, then the aluminum pits. We touch up every cut picket with matched finish coating and replace fasteners with stainless.
- Mismatched replacement sections from big-box stores. Homeowners sometimes patch a Jerith run with a generic vinyl panel they found at a home center. The color is close for about a year, then it fades at a different rate and the whole run looks off. We match the actual Jerith profile or source a quality aftermarket section with the same fade curve.
Jerith Service in Orange: What Local Conditions Mean for Your Equipment
Old Towne Orange has a design review process that reaches front-yard fence lines, and that changes how we spec every Jerith job we do there. A vinyl privacy fence that would sail through in Jerith service in Anaheim or Santa Ana gets flagged in Orange’s Historic District if the height, picket spacing, or gate width reads as modern. Mills Act homeowners are under contract to maintain period-correct materials, so a fence replacement on a 1920s bungalow on Maple or Shaffer becomes a preservation obligation, not a weekend upgrade. On one Craftsman property in Old Towne, our crew replaced a sagging front-yard vinyl picket run with a racked Jerith ornamental aluminum fence set on deeper concrete footings, matching the original porch-era sightline and submitting a compatibility drawing through the city’s historic design review before we touched a post. The owner’s Mills Act commitment meant the new gate width and picket spacing had to read as period-correct, and we used stainless fasteners and touch-up on every cut picket for the long inland sun. That’s what Jerith service in Orange actually involves in the neighborhoods where it matters most.
Jerith Models & Products We Service in Orange
We work on the full Jerith residential line: Jerith Aluminum Fence in residential picket and rail systems, Jerith Vinyl Privacy Fence, Jerith Vinyl Picket Fence, and Jerith Ornamental Aluminum Rackable and Stepped Panels. For current profiles, we source genuine Jerith components directly. For older styles that Jerith has discontinued, we match with quality aftermarket sections that hold the same sightline and fade characteristics. We keep common Jerith post caps, gate hardware, and touch-up finishes stocked for Orange service calls, which means we’re not waiting on a shipment to fix a sagging gate or a leaning post in your 92867 yard. Visit our Jerith sales & service page to see the full scope of what we handle.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Orange
Jerith fence work in Orange typically falls into these ranges, depending on the run length, style, and what’s underneath the surface:
- Vinyl Fence Installation: $3,500 – $9,000
- Aluminum Fence Installation: $4,000 – $10,000
- Post reset or footing repair: Included in full service; a standalone post reset varies by depth and access
- Localized panel or picket replacement: Priced per section, based on the Jerith profile
What drives the cost is the same thing that drives the failure: Orange’s soil and sun. A fence on a flat tract lot in 92865 with good drainage costs less than a racked aluminum run on a hillside with clay heave and historic review. Every free estimate includes a site visit, a written line-item quote, and a straight answer about whether we can repair what you have or whether the run is UV-dead. Call (866) 505-5254 to schedule yours.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and also provide Jerith repair in Tustin, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Orange
Yes, if the fence is visible from the street in the Old Towne Historic District, it goes through the city’s design review process. The board looks at height, material, picket spacing, and gate width against citrus-era proportions. We prepare the compatibility drawings and submit them for you, so the review doesn’t stall your project. Call (866) 505-5254 and we’ll walk the site first.
Yes, with the right spec. Aluminum doesn’t burn, but the powder coat and fasteners matter in ember-zone yards. We use stainless fasteners and touch up every cut end on hillside installations east of Orange, where Santa Ana winds push embers into residential areas. A Jerith aluminum fence with proper fasteners holds up better than wood in those neighborhoods.
Orange has expansive clay soils that swell when wet and shrink when dry. A vinyl post set shallow in that soil will lean within a few years, especially on the wetter lots near the 55. We reset leaning posts in concrete below the movement zone, which is the fix that lasts. Call us for a post assessment at (866) 505-5254.
Mostly no. Once Jerith vinyl has chalked through the capstock, no cleaning product brings it back. What you can do is replace the affected panels with matched sections, which is a lot cheaper than a full run. We’ll tell you honestly whether your panels are restorable or whether you’re better off replacing the sun-facing sections. Estimates are free at (866) 505-5254.
Yes, in most cases. Jerith has discontinued several older picket profiles over the years, but we match to quality aftermarket sections that hold the same sightline and color fade characteristics. If the style is too far gone to match, we’ll show you the closest current Jerith profile and talk through what a phased replacement looks like. Call (866) 505-5254 and bring us a photo of the existing run.
Service Areas Near Orange
We serve Orange and the surrounding communities, including Orange service area coverage across all four ZIPs. For neighbors just west, see our Jerith service in Villa Park page. For coastal-adjacent work south of the 405, check Jerith service in Fountain Valley.
Book Your Jerith Service in Orange Today
Whether you’re in a mid-century tract home in 92865 or a Craftsman in Old Towne, we’ll spec the right Jerith fence for your lot, your soil, and your design review requirements. Call (866) 505-5254 for a free estimate, and we’ll come out, look at what you have, and give you a straight answer.
Written by Noel Cabrera, Owner at Daly City Construction, serving Orange and Orange County.