Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Construction in Stanford, CA | Daly City Construction
We provide independent GAF roof installation and repair across Stanford, including replacement, flashing, gutters, and ventilation work on Timberline and Liberty systems. The thing that separates our GAF work here from any other town on the Peninsula is simple: almost every project in the 94305 ZIP code runs through Stanford University’s own building department and design review, not Palo Alto or Santa Clara County. If you need a GAF roof on a faculty home, a campus outbuilding, or private property in unincorporated Stanford, call (866) 505-5254 for a free estimate.

Why Stanford Residents Choose Us for GAF Service
We’ve torn off and re-shingled enough roofs around Stanford to know what this specific housing stock does to GAF products over time. Mid-century ranch homes, Eichler-influenced faculty housing, and aging campus structures all sit under mature oak canopies and on soil that shifts. That combination creates very specific failure patterns in shingles, flashing, and decking. Noel Cabrera, our owner, trained in construction technology at City College of San Francisco and spent years framing and renovating homes across San Mateo and San Francisco counties, including GAF service in West Menlo Park, before Daly City Construction became what it is today. He’d rather examine the actual roof than guess, and that instinct shows up in every GAF job we take on in Stanford.
We’re an independent firm, not a GAF-authorized contractor, and we don’t pretend otherwise. What that means for you is straight talk about what your roof needs. We carry genuine GAF shingles, starter strips, ridge accessories, and underlayments, and we match them with quality aftermarket flashing and ventilation pieces where GAF doesn’t manufacture the component. Same-day scheduling is often possible for a leak or lift inspection, and we’ll tell you plainly if a slope can be repaired or if it needs a tear-off.
Styles & brands we work with







Common GAF Construction Problems We Solve in Stanford
- Seal-down strips that never cure on shaded north-facing slopes. Stanford’s mature campus oaks and dense lot trees keep entire roof planes in shade most of the day. GAF Timberline shingles rely on a thermal seal-down strip to bond the tab to the course below. When that strip never gets the heat it needs, tabs stay loose, and the first wind-driven rain from the ridgelines near the San Andreas foothills lifts them. We see this constantly on north and east exposures.
- Shingle telegraphing over original skip sheathing. A lot of the mid-century faculty homes near Campus Drive still have their original 1×6 skip sheathing, not solid plywood or OSB. When GAF shingles are laid over that deck, the gaps telegraph through as the framing racks seasonally, opening ridge and valley cracks. The shingle looks fine until the deck moves, then water gets in.
- Deferred flashing at wall-to-roof transitions. University housing accumulates additions over decades, with new wings stacked onto older ones. Every one of those transitions is a potential water entry point. When step flashing wasn’t maintained or was installed incorrectly decades ago, water wicks behind it and rots the fascia from the inside. By the time the shingle surface shows damage, the framing is already compromised.
- Ponding on low-slope utility and outbuilding roofs. Stanford has plenty of flat and low-slope structures: garages, storage buildings, mechanical rooms. GAF Liberty roll roofing and low-slope systems are designed to shed water at specific pitches. When debris accumulates or drainage design is marginal, water ponds and backs under laps, lifting field seams. The ponding is a warning sign, not the problem itself.
- Ridge and valley failures from skipped maintenance. On GAF roofs where ridge caps or valley metal were never replaced during a previous re-shingle, we see accelerated wear at the highest-stress points. In Stanford’s wet winters, a small rust-through in valley metal becomes a channel for water into the deck within a single season.
GAF Service in Stanford: What Local Conditions Mean for Your Equipment
Here’s what most contractors miss about roofing in Stanford: the jurisdiction isn’t a city. Almost every roof we touch in the 94305 ZIP code sits on Stanford-owned or Stanford-reviewed property, so the permit and architectural sign-off route through the university’s building department and design guidelines, not through GAF service in Los Altos or Santa Clara County. That changes everything about how a GAF roof replacement gets scheduled and executed. Campus staging and noise rules can halt a tear-off during finals and commencement weeks. The architectural review board applies its own design standards to any visible roof on a Stanford-owned structure, including material color, profile, and sometimes the specific shingle line. A contractor who has only ever worked through municipal permitting will show up, stage dumpsters in the wrong place, and get shut down mid-project. We coordinate with the university’s facilities office before we ever load a shingle, which means the work happens inside the windows Stanford actually allows. If you own or manage a property in Stanford, the process is not optional, and it’s not something you want to learn about by surprise.
GAF Models & Products We Service in Stanford
We install and repair the full GAF line that makes sense for Stanford’s housing stock: Timberline HDZ and Timberline UHDZ architectural shingles, GAF Liberty roll roofing for low-slope utility and outbuilding roofs, and Timberline Natural Shadow where the campus design review calls for a specific aesthetic. We use GAF UDL underlayment on replacement slopes, GAF ridge vent, and GAF starter strips and ridge caps so the material warranty stays coherent. Where GAF doesn’t make the piece, like certain flashing profiles or vent collars, we use quality aftermarket components that meet or exceed the spec. We stock common GAF colors and accessory pieces locally so a repair in Stanford doesn’t wait on a distribution run from Sacramento. When sheathing or flashing is compromised, we say so. If the deck is sound, we repair and re-flash rather than talk you into a full tear-off.
See the difference
Before
After
Before
After
Before
AfterGAF Service Pricing in Stanford
Roof work in Stanford prices within a predictable range, driven mostly by whether the deck needs replacement and how much staging the university’s rules require. Here’s what our GAF jobs typically run:
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Metal Roof Installation | $15000 – $40000 |
| Tile Roof Repair | $600 – $2500 |
A free estimate covers inspection, measurement, and a written line-item quote. We’ll tell you what needs doing now, what can wait, and what the university review process will require. Call (866) 505-5254 to schedule one.

Serving Stanford, CA — Our Local Coverage Area
We’re based in the Stanford area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – GAF Construction in Stanford
Yes. We coordinate with the university’s facilities office before staging any tear-off on a Stanford-reviewed property, so demolition and the noisiest phases land in windows the campus allows. Finals week and commencement are blackout periods for most construction activity, and we plan sequencing around them from the start. Call (866) 505-5254 and we’ll check the current campus calendar before we schedule you.
In virtually every case, yes. Stanford’s architectural review board approves visible roof changes on university-owned housing, including shingle color and profile. We handle the submission and coordination, and we recommend materials that clear review the first time. Starting without that sign-off means the project can be shut down mid-tear-off.
It depends on the deck and the seal-down strip. If the shingles are intact and the wood below is sound, we can often re-seal tabs and re-flash the affected slope for a repair price. If the tabs never bonded because the seal strip was defective or the north slope never got heat, and the deck is compromised, that’s a replacement conversation. We’ll inspect before we quote, and we’ll tell you which one it is. Call (866) 505-5254 for a free inspection.
Because the 94305 ZIP code sits almost entirely on Stanford land, and that land is governed by the university’s building department and design guidelines, not by GAF in Los Altos Hills or Santa Clara County. The jurisdiction determines everything from staging and noise to material approval, and we’ve worked inside that system enough to keep projects moving without stops.
Yes, but we inspect first. Many of those homes still have original skip sheathing, which doesn’t provide the solid nailing surface GAF’s specifications assume. We re-nail and sister the deck as needed, add solid sheathing where required, then install GAF UDL underlayment and the shingle system above it. That’s how you get a GAF roof that actually performs on a 1960s ranch rather than one that looks right for two winters.
Service Areas Near Stanford
From our Daly City base, we serve the full Peninsula. That includes Stanford service area and nearby communities like Palo Alto, Menlo Park, and Atherton, plus the coastal corridor back up through Daly City, GAF service in Portola Valley, and GAF service in Ladera. For GAF sales and installation help, see GAF sales & service.
Book Your GAF Service in Stanford Today
If your GAF roof is lifting, leaking, or simply at the end of its life, call (866) 505-5254. We’ll inspect, quote, and coordinate with the right people from day one. Noel Cabrera and our crew handle every phase, start to finish.
Written by Noel Cabrera, Owner at Daly City Construction, serving Stanford and the surrounding Peninsula.