Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in San Francisco, CA | Daly City Construction
Daly City Construction provides independent Dvele construction service across San Francisco, and we are not affiliated with or authorized by the manufacturer. We install, retrofit, and repair Dvele modular homes on hillside lots, and the work here is different because every module has to be engineered around a steep slope, a shared party wall, or a retrofitted pre-1940 house. Our knowledge comes from years of opening up Dvele homes in this city and putting them back together correctly. Call (866) 505-5254 for a free estimate.
Why San Francisco Residents Choose Us for Dvele Service
Noel Cabrera grew up in the Westlake district of Daly City, where half the houses on his block were built in the same postwar tract-home wave. He trained in construction technology at City College of San Francisco, then spent years swinging a hammer on residential and light commercial jobs across San Mateo and San Francisco counties before starting Daly City Construction. That background matters because Dvele service in San Francisco is not a catalog-order job. You need someone who has actually lifted a Dvele module onto a sloped lot, shored the downhill foundation connection, and replaced inter-module sealant that failed under fog-belt moisture — whether that’s Mission District Dvele service or work on any other hillside lot.
We carry OEM-compatible Dvele parts for the structural and envelope work where the modular warranty depends on it, and we keep quality aftermarket components for finish and trim. Most of our San Francisco customers come to us after another contractor told them to swap a whole module when the real fix was a joint reseal and flashing correction. We’d rather tell you what the repair actually needs. Dvele sales & service is a big category; independent service like ours fills the gap between the factory spec and what a hillside lot in this city actually does to a modular home.
Styles & brands we work with
Common Dvele Construction Problems We Solve in San Francisco
- Failed module-to-module joint sealant on hillside lots. Differential settlement between stacked Dvele modules opens gaps in the inter-module joints. In San Francisco, where concrete piers on a slope shift over time, those gaps pull fog-belt moisture and fog-driven rain straight into the wall cavity. We re-shore the foundation connection, replace the sealant with Dvele OEM and marine-grade components, and reflash the joint so it holds through the next wet winter.
- Condensation and moisture intrusion at prefab wall penetrations. On windward bay-facing elevations in neighborhoods like the Richmond and Sunset, salt-laden air corrodes flashing and accelerates sealant breakdown around window openings and utility penetrations. We see this on Dvele modules that face the bay, and the fix is a full penetration reflash plus exterior cladding repair where the water got in.
- Foundation interface problems on sloped or pier-supported Dvele modules. The structural connection between a Dvele modular frame and a site foundation loosens under seismic movement. On the steep streets of Bernal Heights or Twin Peaks, that connection has to be engineered for lateral loads and the adjacent homes downhill. We inspect, re-shore, and tighten those connections so the module doesn’t drift.
- Exterior cladding and trim rot on lower module courses. Runoff from concrete piers on a slope saturates the base of Dvele modules. Cycles of damp and dry cause paint failure, then sheathing rot. San Francisco’s fog belt keeps everything damp year-round, so the lower courses need better flashing and drainage than the factory drawing assumes. We correct that.
- Interior water damage from a failed joint or flashing after a wet winter. Once moisture gets into a Dvele wall cavity on a fog-facing elevation, the damage spreads into interior finishes. We dry out the cavity, replace the failed components, and rebuild the affected interior, often as part of a full kitchen or bathroom remodel since the wall is already open.
Dvele Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s Soft Story retrofit mandate hit hundreds of pre-1940 row houses in the older core, and many of those same lots now host Dvele ADU and modular additions. When a new Dvele module is set behind a 1920s Edwardian on a hillside, the module’s foundation has to be engineered around the retrofitted main house and the party-wall sharing on the slope. That coordination problem does not come up in flat, greenfield markets like Sacramento or Tracy. On a steep Bernal Heights hillside street, our crew opened up a Dvele ADU module stacked behind a 1920s Edwardian and found the inter-module joint sealant had failed where the building’s concrete piers on the slope had shifted slightly, letting fog moisture into the wall cavity — a problem we also see providing Dvele repair in Noe Valley. We re-shored the downhill foundation connection, replaced the joint flashing and sealant with Dvele OEM and marine-grade components, and finished with a full kitchen and bathroom remodel inside the ADU to close out the permitted scope. If your Dvele structure sits on a sloped lot in the older core, that foundation-to-module interface is the first thing we inspect. It is also the thing a generic Dvele service call from outside the area will miss.
Dvele Models & Products We Service in San Francisco
We work on the Dvele One single-family modular line, the Dvele Duo multi-unit modular configuration, and Dvele ADU / accessory dwelling unit modules. Our parts approach is straightforward: we source Dvele OEM parts where the modular structural or envelope warranty depends on it, and we use quality aftermarket components for finish and trim work to keep costs honest. We will tell you plainly when a Dvele module joint or panel is repairable and when the damage pattern means replacement is the safer call, rather than pushing a full swap. We stock common Dvele-compatible joint flashing, sealant, and trim components locally so a San Francisco repair doesn’t wait on a factory shipment.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in San Francisco
What you pay depends on the scope, the module’s location on the lot, and what we find once the walls are open. Here are the price ranges we work within for Dvele-related projects in San Francisco:
| Project | Price Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
| Roof Repair | $470 – $2,125 |
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
Every free estimate includes an inspection of the module joints, foundation interface, and exterior envelope where it matters for a San Francisco hillside. Call (866) 505-5254 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in San Francisco
Yes, we do that work regularly. The permitting and structural coordination on those lots is different from flat-lot work because the new module’s foundation has to be engineered around the retrofitted main house and the party-wall sharing on the slope. We pull permits, coordinate with the structural engineer, and handle the shoring and foundation-to-module connection as part of the same scope. Call (866) 505-5254 for an exact quote on your lot.
The fog belt keeps buildings damp all year, and the salt-laden air on bay-facing elevations corrodes flashing and accelerates sealant breakdown. Dvele modules on windward elevations in neighborhoods like the Sunset and Richmond, or those needing Chinatown Dvele service, lose joint sealant and window flashing faster than the same modules inland. We replace corroded flashing with marine-grade components and reseal joints before the water gets into the wall cavity.
Often yes. If the remodel area sits near the module’s foundation interface, the slope settlement or seismic movement has usually affected the floor plane or the module joint behind the wall. We level and re-shore first — standard practice for Dvele in Visitacion Valley and across the city’s hills — then build the kitchen or bathroom on a stable base. That sequence prevents a new tile floor from cracking six months after the remodel.
A Dvele kitchen remodel in San Francisco typically runs $16,520 to $53,100, and a bathroom remodel runs $10,620 to $33,040, depending on finishes, structural repairs, and the module’s access on the lot. The slope and party-wall conditions here push the low end up compared to flat-lot markets. Call (866) 505-5254 for a free estimate with a written, line-item quote.
It might. Roof repairs on Dvele modules in San Francisco run $470 to $2,125 for typical joint or flashing repairs, more if the roof membrane failed and the decking underneath is saturated. If you noticed staining on an upper wall or ceiling after the winter rains, we can inspect the roof and the module joints above the stain. Call us before the next storm cycle.
Service Areas Near San Francisco
We serve all of San Francisco, including Visitacion Valley and Noe Valley, and we take Dvele service calls in nearby Daly City, Broadmoor, Colma, and Brisbane. For work south of the city, see our Dvele service in San Bruno page or our Dvele service in Pacifica page. For the full list of neighborhoods we cover, visit our San Francisco service area page.
Book Your Dvele Service in San Francisco Today
Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix. Call (866) 505-5254 to schedule your free Dvele service estimate in San Francisco.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Francisco and the surrounding Bay Area.