Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Upland, CA | Daly City Construction
We provide independent CWS cabinet installation, refacing, and repair across Upland, CA, and the one thing that separates our CWS work here from a generic cabinet service is that we understand how Upland’s expansive adobe clay and original slab-on-grade ranch foundations interact with the cabinet boxes bolted to your walls. When CWS doors stop aligning in the 91786 flats, the problem is rarely the hinge alone. It’s usually the ground under the house shifting during fall Santa Ana events, and we fix both the cabinet and the anchoring so it doesn’t happen again next season. Call (866) 505-5254 for a free estimate on CWS cabinet repair, refacing, or full kitchen installation in Upland.

Why Upland Residents Choose Us for CWS Service
We have spent years installing and fitting CWS cabinetry and the surfaces that go on top of it, so we know where this line’s boxes, hinges, and drawer hardware actually fail in Upland’s dry interior air. We fix it without pretending to be the factory. Our work is independent, warranty-neutral, and documented photo-by-photo so you see exactly what was replaced and why.
Noel Cabrera, our owner, grew up in the Westlake district of Daly City, where half the homes were built in the same postwar tract-home wave you see throughout Upland’s 91786 flats. He trained in construction technology at City College of San Francisco and spent years swinging a hammer on residential jobs across San Mateo County before building this company around a simple idea: tell me what the house needs, not what you think it needs, then we’ll figure out the right fix. That’s the approach we bring to every CWS sales & service call in Upland. We stock CWS-compatible OEM hinges, glides, and shelf pins locally, and when an aftermarket soft-close unit is the better call, we tell you upfront and show you both options.
Styles & brands we work with







Common CWS Construction Problems We Solve in Upland
These are the five most frequent CWS failure modes we see across Upland’s 91784, 91785, and 91786 ZIP codes, and each one ties back to something specific about this city’s housing stock or climate.
- Hinge and drawer-glide failure on MDF boxes in 91786 ranch kitchens. The original slab-on-grade ranch homes off Foothill Boulevard have decades of hot dry summers followed by closed-up winter heating, and that cycle desiccates the particleboard around CWS hinge screws until the holes strip. The door doesn’t just sag; the screw spins in the box. We re-bore and insert new screw stock, then re-hang with a quality aftermarket soft-close hinge.
- Paint and finish checking on CWS painted MDF doors on 91784 exposures. The north-side foothill homes sit under full summer sun with Santa Ana wind-driven dust, and south- and west-facing CWS Dover doors bake for ten hours a day. We see microfractures in the paint film that look like dry riverbeds. A reface with proper primer prep and a low-sheen finish stops the checking cycle.
- Cabinet box sag and out-of-square mounting on wall units pulled loose by slab movement. This is the big one in Upland. When the adobe clay shrinks during fall wind events, slabs crack and heave, and CWS wall boxes bolted to those walls rack out of square. Doors no longer line up even after you adjust every hinge screw twice.
- Water damage and delamination at the toe kick and sink base of CWS laminate-faced cabinets. Slow under-sink leaks in rarely used guest baths go unnoticed for months in Upland’s older ranch homes. The toe kick swells, the laminate separates, and the box starts crumbling from the bottom up. We cut out the damaged panel and rebuild the base rather than replacing the whole run.
- RTA cabinet boxes that were never square from day one. We see a lot of CWS Ready-to-Assemble boxes in Upland rental ADUs and garage conversions. When the original installer didn’t square the box before mounting, doors bind and drawer faces rub. We pull the unit, square it, re-anchor it properly, and re-hang the fronts.
CWS Service in Upland: What Local Conditions Mean for Your Equipment
Here’s a checkable fact about Upland that most cabinet companies ten miles away won’t tell you: the 91786 flats south of Foothill Boulevard are dominated by original slab-on-grade ranch foundations built in the 1950s and 1960s, and the expansive adobe clay underneath those slabs shrinks during extended fall Santa Ana wind events. When that clay shrinks, the slab cracks and heaves. That movement racks the CWS kitchen cabinet boxes bolted to the wall and throws doors and drawers out of alignment before any finish problem even shows up. This is not a hinge defect. It’s geology working against your cabinetry.
On a 1962 ranch off Euclid Avenue in the 91786 flats, our crew was called out because the CWS painted MDF kitchen doors had stopped closing and two upper boxes were visibly tilted. We traced it to a heaving slab crack under the wall run, so we re-anchored and shimmed the CWS boxes back to plumb, replaced stripped OEM hinges with soft-close aftermarket units, and re-set a quartz top on the repaired run. The cabinets lined up again without a full tear-out. That’s what local CWS service in Upland actually looks like: we treat the cabinet and the ground it sits on as one problem.
CWS Models & Products We Service in Upland
We work on the full range of CWS cabinetry lines installed throughout Upland, including the CWS Dover recessed-panel painted MDF line, the CWS Newport raised-panel stained series, CWS Shaker-style solid-wood front cabinetry, and CWS Ready-to-Assemble box units commonly found in ADUs and garage conversions. Our parts approach is straightforward: we source CWS-compatible OEM hinges, glides, and shelf pins where the factory pattern is still available, and we switch to a quality aftermarket soft-close hinge or glide when an OEM match isn’t practical. We disclose which one we’re using before work starts. On boxes that are still square and solid, we reface and re-hinge rather than sell a full replacement. We only recommend new cabinetry when the box structure or the slab under it has actually failed.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Upland
Cabinet and kitchen work in Upland spans a wide range depending on whether you’re refacing a few CWS boxes in a 91786 ranch or doing a full kitchen remodel on a north-side 91784 custom home. The table below reflects what we typically see across the city.
| Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Cost depends on whether we’re repairing existing CWS boxes, refacing fronts, or doing a full tear-out and new install, plus the slab condition underneath if we find heaving. A free estimate includes a photo-documented look at your existing hardware, box squareness, and slab anchoring. Call (866) 505-5254 to schedule one.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Upland
More often than not in the 91786 flats, it’s the house moving under the cabinets. The expansive adobe clay under original slab-on-grade ranch foundations shrinks during fall Santa Ana wind events, the slab heaves, and the CWS boxes bolted to the wall shift out of square. We check the slab and the anchors before we touch a hinge. Call (866) 505-5254 and we’ll tell you which problem you actually have.
Yes, when the boxes are still square and structurally sound. We reface CWS Dover and Newport fronts with new doors, drawer faces, and hardware, which costs a fraction of a full tear-out. If the box itself is delaminated or racked beyond shimming, we’ll tell you straight and show you the photos. The estimate is free at (866) 505-5254.
That’s a finish failure from sustained afternoon sun and Santa Ana wind-driven dust on west- and south-facing exposures, which we see regularly in the 91784 foothill homes. The original paint film develops microcracks called checking, and no amount of cleaning brings back the sheen. We strip, re-prime, and refinish with a low-sheen topcoat that holds up in Upland’s sun. Call (866) 505-5254 for a refacing estimate.
Yes. We install quartz and granite countertops over new CWS cabinet runs, including re-setting tops that shifted when slab movement racked the boxes underneath. We work with Cambria and Caesarstone quartz among other lines, and we template after the boxes are plumb and anchored, not before. Countertop installation in Upland typically runs $2,000 – $6,500.
Yes, and it’s a good fit for Upland’s 1950s and 1960s ranch bathrooms, where floor space is tight and the original vanity is often too wide for a modern shower layout. We size a CWS vanity to the remaining wall run and handle the tub-to-shower conversion under the same scope. In Upland this work typically runs $3,500 – $10,000. Call (866) 505-5254 to talk through your bathroom dimensions.
Service Areas Near Upland
We provide independent CWS cabinet service across the broader region, including Upland service area coverage in every ZIP from 91784 through 91786. If you’re checking other cities where we handle CWS work, see our CWS service in Fullerton and CWS service in Stanton pages for local specifics there.
Book Your CWS Service in Upland Today
If your CWS cabinet doors are misaligned, the paint is checking, or a vanity needs to move for a tub-to-shower conversion, call (866) 505-5254. We’ll schedule a free estimate, check your slab and your boxes, and tell you exactly what the house needs. Upland’s clay doesn’t wait, and neither should you.
Written by Noel Cabrera, Owner at Daly City Construction, serving Upland since the company’s founding.