Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Bruno, CA | Daly City Construction
We provide independent CWS cabinet installation, repair, refacing, and full kitchen remodeling across San Bruno, and our work here is shaped by one thing most cabinet crews miss: the fog-belt moisture that rolls through the Gap and settles into west-facing kitchens. Homeowners looking for a CWS service in Millbrae face the same damp conditions we know how to handle. San Bruno homeowners call us when CWS boxes swell, thermofoil peels, or soft-close glides gum up from years of coastal damp. We know the Brookhill, Sedona, Lancaster, and Hartford lines because we’ve installed and serviced them across the Peninsula, and we’ll give you an honest read on whether to repair, reface, or replace. Call (866) 505-5254 for a free estimate.
Why San Bruno Residents Choose Us for CWS Service
Noel Cabrera grew up in Daly City’s Westlake district watching postwar tract homes get rebuilt right, and that early lesson stuck: you fix the cause, not just the symptom. When a CWS cabinet fails in San Bruno, it’s usually a moisture or ventilation problem wearing the cabinet down from the outside in. We trace the actual source before we touch a hinge or a box.
Because we’re an independent CWS service provider, not a manufacturer dealer, we’re not pushing whichever line a distributor needs to move this quarter. We stock CWS OEM hinges, glides, and touch-up finishes for current lines, and we keep quality aftermarket soft-close hardware on hand for discontinued models. If you’re in a 1940s rancher off San Bruno Avenue with original copper supply lines, we already know what to check before the cabinet even comes off the wall.
Styles & brands we work with
Common CWS Construction Problems We Solve in San Bruno
- Swollen toe kicks and sink aprons on CWS Lancaster base cabinets. San Bruno’s 1940s-1960s tract homes often still run original copper supply lines. A slow pinhole leak behind a Lancaster box will swell the particleboard core at the toe kick long before you see water on the floor. We pull the box, trace the leak, and replace with new CWS boxes on adjustable legs so future leaks don’t wick straight into the core.
- Soft-close drawer glides that stick or slam on Brookhill and Sedona lines. Fog-belt humidity mixed with kitchen grease creates a paste that gums the glide rollers and bearings. West-facing kitchens without proper venting see it first. We clean and re-lube when possible, and swap to stainless soft-close glides that hold up better in San Bruno’s damp air.
- Peeling thermofoil door faces on CWS Hartford cabinets. Mid-century San Bruno ranchers run galley kitchens with poor airflow, and the bottom edge of a Hartford thermofoil door is the first place moisture and heat separate the film from the MDF core. This is a humidity and ventilation failure, not a manufacturing defect. We’ll tell you when a door can be re-faced and when the whole run should go.
- Faded or cracked finishes on maple and oak CWS doors on the east-side flats. The flats get more direct sun than the foggy west hillsides, and UV exposure takes a real toll on stained and painted finishes. Owners blame the cabinet; it’s actually an exposure issue. We match CWS finish codes and re-coat when the core is sound.
- Mismatched cabinet dimensions in Crestmoor rebuild homes. A block can go from a 1953 original to a 2013 rebuild in fifty feet. Cabinet openings, wall framing, and even floor heights vary in ways that surprise crews expecting uniform tract stock. We measure every run before ordering, because in Crestmoor the permit records don’t always match what’s actually behind the drywall.
CWS Service in San Bruno: What Local Conditions Mean for Your Equipment
Here’s the thing most cabinet installers won’t tell you about San Bruno: the Crestmoor neighborhood was rebuilt after the 2010 PG&E pipeline explosion, so it’s a patchwork of 1950s originals sitting next to 2010s rebuilds, sometimes on the same block. That means CWS cabinet jobs in Crestmoor often go into newer homes with different wall framing, different rough-in dimensions, and different permit records than the 1950s tract stock two doors down — a challenge we also manage for customers seeking CWS in South San Francisco. A crew that assumes uniform construction will order wrong box sizes or hit a fire block that wasn’t in the plan. We’ve worked enough Crestmoor kitchens to know you verify every opening against the actual studs, not the paperwork. Add in the coastal fog that pushes through the Gap and settles on west-facing walls, and you’ve got a cabinet environment that punishes shortcuts: moisture swells cores, gummed glides fail early, and thermofoil delaminates along the bottom edge. In San Bruno, CWS work is less about the cabinet and more about what the house is doing to the cabinet.
CWS Models & Products We Service in San Bruno
We work on the full CWS residential range you’re likely to find in San Bruno kitchens: Brookhill, Sedona, Lancaster, and Hartford. Brookhill and Sedona show up most often in newer Crestmoor rebuilds and remodeled flats homes. Lancaster base cabinets are common across the older 1940s-1960s tract stock. Hartford, with its thermofoil door faces, shows up in mid-century ranchers where the original kitchen got a budget refresh twenty years ago.
For parts, we start with CWS OEM hinges, drawer glides, and touch-up finishes when the line is still supported. When OEM parts are backordered or the line’s been discontinued, we match to quality aftermarket soft-close hardware that fits the existing bore pattern. For San Bruno turnaround, we keep common CWS glide sizes, hinge plates, and finish touch-up kits stocked locally, which means fewer multi-week parts waits for fog-belt kitchens that can’t sit apart.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Bruno
Most CWS work in San Bruno falls into one of five scopes, and the price depends on what the house is doing to the cabinets, not just the cabinet line. Here’s where San Bruno homeowners typically land:
| Scope of Work | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What changes the number: whether boxes are still structurally sound, whether you’re dealing with a moisture source that needs fixing first, whether the walls behind the cabinets are straight (they often aren’t in older San Bruno ranchers), and whether you’re refacing or replacing. Our free estimate includes a written line-item quote and an honest recommendation on repair versus replace. Call (866) 505-5254 to schedule.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Bruno
Yes, when the line is still supported we can order exact CWS box sizes and door styles to match your 1990s installation; when the line’s been discontinued, we match dimensions and finishes with current CWS or equivalent brands and tell you upfront where the color match will land. In San Bruno’s tract-heavy stock, a 1990s kitchen in a 1950s rancher usually has standard sizes that are still produced, but Crestmoor rebuilds can throw odd dimensions. Call (866) 505-5254 and we’ll verify against your existing run.
That peeling on Hartford thermofoil doors is almost always moisture and heat working the film off the MDF core, and San Bruno’s fog-belt humidity plus a poorly vented galley kitchen makes it worse along the bottom edge. The fix starts with ventilation: if your range hood doesn’t vent outside, we address that before refacing or replacing doors, otherwise the new ones will peel the same way. Call (866) 505-5254 for an on-site read.
Replacing cabinets in the same footprint doesn’t usually need a permit in San Bruno, but adding new electrical for under-cabinet lighting, moving a sink, or any structural work in Crestmoor rebuilds can trigger one, and we’ll pull whatever’s required. We handle the permit scope as part of the estimate so you’re not surprised later.
The constant coastal moisture that pushes through the Gap means CWS particleboard cores absorb humidity faster, soft-close glides bind on grease-and-damp buildup, and thermofoil faces fail years earlier than they would in, say, Walnut Creek. San Bruno cabinets need better ventilation and moisture barriers than the same CWS box in a dry inland kitchen — a lesson we’ve also applied for homeowners using our CWS service in Brisbane.
Where the boxes are square and the cores aren’t swollen, refacing CWS cabinets with new doors and finished panels costs less than a full replacement and buys another decade or more; if the toe kicks are blowing out from old plumbing leaks, replacement is often the better spend. We’ll show you both numbers. Call (866) 505-5254 for a straightforward comparison on your exact kitchen.
Service Areas Near San Bruno
We run CWS service from Daly City down through Brisbane and over to the coastal side of the Peninsula. If you’re in Daly City, Broadmoor, Colma, Visitacion Valley, Brisbane, or anywhere in the 94066 ZIP, we can get to your job without a long dispatch. Our CWS sales & service coverage spans the Peninsula, and you can see the full San Bruno service area for more detail.
We also cover the coast: CWS service in Pacifica for fog-side homes, and CWS service in Chinatown for city kitchens with older plumbing and tight layouts.
Book Your CWS Service in San Bruno Today
If your CWS cabinets are swelling, peeling, or sticking in San Bruno, call (866) 505-5254. We’ll come out, find the source of the problem, and give you an honest repair-versus-replace answer with a written quote. Estimates are free.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Bruno and the Peninsula.