Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Francisco, CA | Daly City Construction
We provide independent CGI cabinet and countertop service across San Francisco, from CGI in Mission District to Noe Valley and beyond, covering full kitchen remodels to single-box repairs, and we’re not a manufacturer-authorized dealer. What makes our CGI work different here is that we plan for pier-on-slope foundations and out-of-square walls in pre-1940 row houses before the first box gets set. If your CGI kitchen doors drag or a quartz seam has opened, call us at (866) 505-5254 for a free estimate.
Why San Francisco Residents Choose Us for CGI Service
CGI is a designer-owned cabinet and countertop brand, and that means we know exactly how its semi-custom boxes, door styles, and quartz tops are built. Noel Cabrera, our owner, trained in construction technology at City College of San Francisco and spent years swinging a hammer on residential jobs across San Mateo and San Francisco counties before founding Daly City Construction. He grew up in the Westlake district of Daly City, where half the houses on his block were built in the same postwar tract-home wave, and he knows what fog-weathered framing does to a kitchen over time. Our crews have installed and retrofitted CGI sales & service work in narrow Edwardian and Victorian row houses across the city, which means we check for slope-shifted floors and party-wall moisture before cabinetry ever comes off the truck.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Francisco
- Swollen and delaminated toe kicks. When a slow supply-line or dishwasher leak goes unseen against a party wall in a damp Edwardian, the frameless CGI box at the kick swells and the laminate separates. We pull the affected boxes and check the wall cavity before re-installing.
- Soft-close hinges and drawer glides that fail early. A cabinet run sitting against a north-facing exterior wall that never fully dries in the marine layer causes repeated expansion and contraction. Hardware wears faster there, and we replace it with OEM or matched aftermarket soft-close units.
- Quartz tops that crack or separate at seams. When the underlying floor has shifted on a hillside pier foundation, the countertop moves with it. The crack or separated seam is a level issue, not a stone defect, and we correct the plane before resetting the top.
- Door and drawer fronts with checked or lifting finish. Salt-laden air along the bay and ocean edges keeps humidity swinging constantly. We see finish checking near windows and along runs that face the water, and we match replacement fronts to the existing CGI line where possible.
- Dragging doors on a kitchen that was level at install. Floors that have settled since installation pull cabinets out of plane, and doors start to bind. We re-level the run and re-anchor boxes rather than telling you to live with it.
CGI Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the thing most generic CGI pages won’t tell you. Because so many San Francisco hillside homes sit on concrete piers on a slope rather than a flat slab, a CGI cabinet run that was dead level at install can go out of plane within a few years. We check floor deflection and pier footing before we set boxes and shim the run rather than assuming the floor is flat. That pier-on-slope condition, not weather, is what drives most of the re-leveling work we do on CGI service in Noe Valley and across the city. On a steep Edwardian block off Union Street in Cow Hollow, a homeowner’s CGI shaker kitchen had doors that dragged and a quartz seam that had opened over the peninsula. We traced it to floor deflection where the cabinet run crossed from a pier-supported section onto a newer footing, shimmed and re-anchored the run, replaced two swollen toe-kick-adjacent boxes with OEM-matched units, and reset the seam. The doors close clean now, and the top sits level. That’s the difference between a contractor who has worked these hills and one who just unpacks boxes.
We serve all of San Francisco service area, including the 94127, 94128, 94129, and 94130 ZIP codes.
CGI Models & Products We Service in San Francisco
We work on the full CGI line: Euro-style frameless cabinetry with full-overlay doors and soft-close hinges, Shaker and raised-panel semi-custom cabinet lines, quartz and granite countertop programs, and their luxury vinyl plank and engineered wood flooring. When a hinge or drawer glide needs replacing, we use CGI OEM parts where the line is still produced, and we match proven aftermarket soft-close hardware when a legacy CGI line has been discontinued. For a single failed box or front on solid framing, we repair. When swelling, delamination, or sag has spread through a run, we recommend replacing that run rather than patching it. We keep common CGI-compatible hinges, glides, and shims stocked locally so San Francisco turnaround doesn’t wait on a parts shipment from out of state.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Francisco
Pricing depends on scope, but here is what we see across San Francisco for CGI-specific work. The ranges below reflect typical costs in this market, including labor, materials, and adjustment for the out-of-level conditions we routinely correct on hillside lots.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Backsplash Installation | $945 – $2,950 |
What drives the cost is the condition of the floor plane, whether we’re shimming a whole run or resetting one box, and whether the quartz needs to be pulled and reseamed. Every free estimate includes a look at the foundation and wall conditions that affect CGI cabinetry in San Francisco, not just a count of doors and drawers. Call (866) 505-5254 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well, from CGI in Chinatown to the outer neighborhoods. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Francisco
Your floor has likely shifted. San Francisco hillside homes on pier foundations settle unevenly over time, and a cabinet run that was level at install can tilt enough to make doors bind and hinges wear — a common issue we address with our Visitacion Valley CGI service. We check deflection and pier footing, then shim and re-anchor the run so it sits true again. Call (866) 505-5254 and we’ll tell you what the house needs, not what you think it needs, then figure out the right fix.
In most cases, no. Refacing, replacing doors and drawer fronts, and swapping hinges on existing boxes does not change the footprint, plumbing, or electrical, so the city generally does not require a permit for that scope. Structural work related to the cabinets, like moving a wall or altering the floor framing, is a different conversation, and we’ll flag that before anything gets touched.
When the CGI line is still produced, we source OEM doors, hinges, and glides directly. When a line has been discontinued, we match the profile, finish, and overlay with a proven aftermarket soft-close equivalent. A single matched door on solid framing is a repair; a full run of failed boxes is a replacement. We’ll tell you which one applies.
It should, if the retrofit is done before the counters are set and the cabinet run is shimmed level on the new floor plane. The risk is when retrofit work jacks and shifts the floor after quartz is installed: seams can open and stone can crack at stress points. We recommend coordinating countertop removal and reset with any seismic retrofit that touches the kitchen floor, or at minimum having us re-level the run before the retrofit crew starts. Call (866) 505-5254 to sort the sequencing before work begins.
Humidity swings from San Francisco’s marine layer and salt-laden bay air cause the finish to expand and contract, and the area near windows gets the widest swings. Checking and lifting near glass is a common failure mode on houses with ocean or bay exposure. We can match replacement fronts when the checking is localized, or refinish the run if the underlying substrate is sound. For an exact quote, call (866) 505-5254, estimates are free.
Service Areas Near San Francisco
We also handle CGI cabinet and countertop work in CGI service in San Bruno, CGI service in Pacifica, Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane. If you’re on the peninsula or in the southern neighborhoods, we’re already working nearby.
Book Your CGI Service in San Francisco Today
If your CGI kitchen is sagging, dragging, or separating at the seams, we’ll come look at it. Call (866) 505-5254 to schedule your free estimate, and we’ll tell you whether it’s a repair or a replacement before you spend a dollar on parts.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Francisco and the surrounding peninsula.