Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Claremont, CA | Daly City Construction
We provide independent CGI cabinet and countertop installation, refacing, and repair across Claremont. The thing that makes our CGI work different here is that we’ve spent years fitting these cabinets into 1920s Craftsman bungalows with out-of-square walls, mid-century ranches on clay soil, and everything between. If you’re planning a kitchen or bath project with CGI products, call us at (866) 505-5254 and we’ll tell you straight what will work, what won’t, and what it costs before you order a single box.
Why Claremont Residents Choose Us for CGI Service
Most contractors in Claremont can hang a cabinet. Far fewer can tell you why a thermofoil door will delaminate on a west-facing wall after three Santa Ana seasons, or how to scribe a full-overlay run to a plaster wall that’s drifted three-quarters of an inch over ninety years. That’s where we come in. Noel Cabrera grew up in the Westlake district of Daly City watching postwar tract homes get re-framed, and he learned early that the house tells you what it needs if you know how to listen. Around Claremont, that usually means the house is older than the product catalog, and the walls don’t care what the spec sheet says.
We’re an independent CGI sales & service provider, not a factory-authorized shop or dealer. That independence matters because we quote based on what the job actually requires, not what a manufacturer program pushes. We work with CGI-matched OEM doors, hinges, and glides when a box is sound, and we switch to proven aftermarket hardware like Blum-style soft-close when OEM has been discontinued. You get a straight answer either way.
Styles & brands we work with
Common CGI Construction Problems We Solve in Claremont
- Delaminated thermofoil doors on west-facing uppers: Claremont’s summer heat and long dry Santa Ana stretches bake thermofoil and laminate faces until they lift and peel at the edges. We see this most on kitchens with afternoon sun through west windows. Typically that means replacing the door faces or the run, not patching.
- Swollen MDF or particleboard boxes at the toe kick and deck: A slow leak under the sink or behind the dishwasher wicks into the cabinet base and swells the substrate. We see it often in 1960s-70s tract kitchens on the north and south edges of Claremont where the original cabinets lasted long enough to hide a leak for a decade.
- Binding or gapping full-overlay doors in older homes: In the 1900s-1930s bungalows near the Village and the Colleges, the walls have moved even if the cabinets haven’t. CGI full-overlay doors are unforgiving about square. When the opening is out, the doors bind or gap. That’s a fit problem, not a product failure.
- Loose drawers and sagging hardware on uneven floors: Claremont sits on expansive clay soils, and older wood subfloors over those foundations settle unevenly. If a CGI cabinet run isn’t shimmed level, the drawers and hardware take the strain from day one. We level everything before we hang the boxes.
- Period-remodel misfits in historic districts: Somebody installs a modern euro-style CGI run in a 1920s Spanish Colonial Revival kitchen without thinking about the trim, the proportions, or the review board. Then the city asks questions. We draw and document the fit before we order anything.
CGI Service in Claremont: What Local Conditions Mean for Your Equipment
Here’s the detail that matters if you live in one of Claremont’s historic districts around the Colleges or the Village: any visible kitchen or bath change goes through the city’s architectural review, and the standards are strict. Additions have to match original period detailing. That means a CGI cabinet run planned for a 1920s bungalow on College Avenue or near Harvard has to be drawn, reviewed, and approved before we order a single box. The same remodel in an unregulated tract on the north edge of Claremont can proceed without a design hearing. We’ve done both. The bungalow jobs take more time up front, but the approval is worth it when the finished kitchen respects the house instead of fighting it.
One job outside the formal historic overlay taught us the same lesson. A CGI run with full-overlay doors in a 1920s Craftsman off Harvard Avenue near the Colleges was binding at the sink wall. When we pulled the doors, the wall was out of square by nearly an inch over a four-foot span. We rebuilt the run in CGI shaker cabinets, shimmed and scribed to the existing plaster, set a quartz top with a matching backsplash, and re-flashed the sink wall. The design matched the original trim, so it cleared review without a fight.
CGI Models & Products We Service in Claremont
We install and service the CGI lines most common in Claremont kitchens and baths: the Euro-style frameless full-overlay cabinets with thermofoil and painted MDF doors, the shaker and raised-panel solid-wood cabinet series, the locally fabricated quartz and granite countertop program, and the vanity and bath cabinetry lines. Our parts approach is direct: when the box is sound and the finish still exists, we order CGI-matched OEM doors, hinges, and drawer glides. When OEM is discontinued, we spec a quality aftermarket equivalent. If the box itself is swelling, delaminating, or out of level, we tell you to replace the run rather than reface over a failing substrate.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Claremont
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the price in Claremont is mostly the condition of the room: whether the walls need to be brought back to level before cabinets go in, whether the existing run needs demo and disposal, and what your countertop material actually costs fabricated locally. A free estimate from us includes walking the room, checking the substrate, and a written line-item quote before you commit to anything. Call (866) 505-5254 and we’ll schedule it.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Claremont
That depends on whether the substrate behind the thermofoil is still sound. In most Claremont kitchens, the peeling starts at the door edges after prolonged sun and dry heat cycles, and the MDF underneath has already begun to degrade once the face lifts. If the boxes are solid and only the doors are failing, refacing or replacing the doors works. If the box ends are swelling too, replacement is the honest answer. Call (866) 505-5254 and we’ll look before we quote anything.
Yes, if the kitchen change is visible from the street or involves exterior work, and in many Village-area properties the interior design review applies regardless. Claremont’s architectural standards require period-appropriate detailing. That means the cabinet style, finish, and layout should be drawn and approved before we order a single box. We handle that documentation for you.
A slow leak. Usually under the sink or behind the dishwasher, where water wicked into the base over months or years. Particleboard and MDF don’t recover from that. We replace the affected run and address the leak at the same time. Call (866) 505-5254 for an exact scope and price.
Yes. We level every run before we hang boxes, using shims and scribing to account for the floor’s actual condition. On older Claremont homes with clay-soil settlement, the subfloor is rarely flat, and full-overlay doors will bind if the cabinets aren’t perfectly level. It’s standard practice for us, not an upcharge.
We do. We measure the run, template for the stone, and have it fabricated locally to fit your actual dimensions, not a stock size. The backsplash goes in after the top is set, matched to the stone or specified as tile depending on your design and what the city review requires. Estimates are free. Call (866) 505-5254.
Service Areas Near Claremont
We serve all of Claremont service area within ZIP 91711, plus nearby cities including CGI service in Pomona, CGI service in Buena Park, Montclair, Upland, and La Verne. If you’re in a neighboring community and planning a CGI kitchen or bath project, the same team handles it.
Book Your CGI Service in Claremont Today
Call (866) 505-5254 to schedule your free CGI service estimate in Claremont. We’ll walk the room, check the conditions, and give you a written quote that covers what the house actually needs. Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Claremont and the surrounding communities.