Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Upland, CA | Daly City Construction
Ameristar construction service in Upland, CA means working with equipment that has to survive Santa Ana wind events, foothill heat, and the slab movement that comes with expansive adobe clay. We’re Daly City Construction, an independent Ameristar service provider, not manufacturer-authorized, and we quote, install, and service Ameristar kitchen, bath, and roof systems across Upland’s 91784, 91786, and 91785 ZIP codes. If you need a straight answer on whether your Ameristar system is worth repairing or replacing, call (866) 505-5254.
Why Upland Residents Choose Us for Ameristar Service
Noel Cabrera grew up watching his uncle re-frame a garage in Daly City’s Westlake district, and those postwar tract homes behave a lot like the ones we see in Upland’s 91786 flats. Same era. Same slab-on-grade foundations. Same surprises behind drywall. When we say we understand how Ameristar equipment holds up in a 1960s ranch, it’s not catalog knowledge. We’ve opened enough galley kitchens here to know the slab may have cracked and the wall openings may be out of square after a dry season.
That’s the difference. We don’t show up to a Upland home with a generic installation checklist. We look at how the foundation, framing, and mechanical clearances interact with the Ameristar equipment you’re installing or servicing. We use OEM Ameristar parts for compressors, coils, and control boards so your warranty and spec stay intact, and quality aftermarket parts for wear items like capacitors, contactors, and filters where the part is equivalent. On rigs past roughly 12 to 15 years with a failed compressor or corroded coil, we’ll tell you to replace it rather than sink repair money into a unit on borrowed time.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Upland
- Slab movement racking wall openings out of square. Expansive adobe clay under 91786 slab-on-grade foundations shrinks during Santa Ana wind events. Door and window openings shift. Ameristar frames bind, seals fail, and a cabinet install that should take two days turns into framing work first. We see this spike every fall in Upland’s older ranch tracts.
- Builder-grade condenser cabinets clogged with Santa Ana grit. Ameristar outdoor condenser cabinets and coils corrode and fill with wind-driven dust through those hot, dry wind events. By mid-summer, airflow drops and efficiency tanks. Regular coil cleaning and cabinet inspection in Upland’s foothill exposure matters more than most homeowners expect.
- Oversized air handlers in decades-old ranch attics. Ameristar indoor air handlers and ductwork in original 1950s and 1960s attics often mismatch against leaky original duct runs. The unit short-cycles, the attic heats further, and you pay for it on the electric bill. We size replacements against actual duct condition, not just square footage.
- Original galvanized and cast-iron plumbing complicating remodel scope. When we open walls for an Ameristar kitchen or bath remodel in Upland, we frequently find original galvanized supply lines. Replacing them while the walls are open is smart. Leaving them buried is not. We re-plumb as part of the scope when we see it.
- Roof systems worn by hot, dry summers and wind events. Upland’s sun and Santa Ana cycles accelerate shingle wear and flashing fatigue. Ameristar roof equipment and penetrations need detailing that accounts for the foothill wind exposure, especially on the north side of town toward 91784 where lots slope toward the mountains.
Ameristar Service in Upland: What Local Conditions Mean for Your Equipment
The post-WWII ranch tracts along Upland’s 91786 flats sit on original slab-on-grade foundations that crack when the expansive adobe clay shrinks through extended Santa Ana wind events. Fall brings a measurable spike in foundation-repair calls here, and that directly changes how we sequence kitchen and bath remodels. On a 1960s ranch in the 91786 flats, we opened a cramped galley kitchen and found the slab had cracked and the wall openings were out of square after a dry Santa Ana season. We re-leveled and reframed before setting new Ameristar cabinets and a quartz island. We re-plumbed the original galvanized supply lines while the walls were open and finished the job on a schedule built around the hot, windy weeks. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
Ameristar Models & Products We Service in Upland
We service the Ameristar M4 series air conditioners, builder-grade split systems common in Upland’s tract homes from the 1950s through the 1970s. We also work on Ameristar M4 and M9 gas furnaces and air handlers, plus Ameristar Merit-series packaged and split cooling units. We carry OEM compressors, coils, and control boards where warranty integrity matters, and we stock quality aftermarket capacitors, contactors, and filters locally for faster turnaround on Upland service calls. If your Ameristar unit is in a closet or wall cavity with tight clearances after a previous remodel opened the floor plan, we’ll flag that before it becomes a service headache.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Upland
Cost depends on what’s actually wrong or what scope the remodel requires. Here’s what we see in Upland’s market:
| Project | Upland Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
These ranges reflect what we’ve scoped across Upland’s housing stock, from the 91786 ranch tracts to the larger custom homes on the north side in 91784, and nearby areas where we provide Rancho Cucamonga Ameristar service. Foundation re-leveling, re-plumbing, and duct remediation add cost when they surface, and in this area they surface often. A free estimate means we walk the property, check the condition of the existing equipment and openings, and give you a written line-item quote. Call (866) 505-5254 to schedule one.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Upland
Why do so many Ameristar cabinet and vanity installs in Upland’s 91786 flats turn into framing or foundation work?
Because the slab-on-grade foundations crack when the expansive adobe clay shrinks during Santa Ana wind events. Wall openings rack out of square, and a cabinet or vanity install won’t sit true until the framing is corrected. We inspect for this before quoting any Ameristar cabinet work in Upland’s 91786 flats. Call (866) 505-5254 and we’ll tell you honestly if your job is a simple install or something deeper.
Can my Ameristar condenser survive Upland’s hot, dusty summers and Santa Ana wind events?
It can, with maintenance. The builder-grade Ameristar condenser cabinets and outdoor coils corrode and clog with wind-driven dust during Santa Ana events, which cuts airflow and efficiency. Annual coil cleaning, cabinet inspection, and clearance checkups make the difference. If your unit is past roughly 12 to 15 years and the coil is corroded, we’ll quote a replacement rather than a repair that won’t last.
Is a full Ameristar kitchen remodel realistic in a 1950s Upland ranch, or should I do a partial?
It’s realistic, but expect the scope to grow once walls come open. Original galvanized plumbing, cracked slabs, and out-of-square openings are common in Upland’s 1950s ranches. A full remodel lets us fix those properly while the walls are open. A partial remodel risks burying problems you’ll pay for later.
Do the larger custom homes on Upland’s north side near the foothills need different Ameristar roof and equipment detailing?
Yes. Those homes in 91784 sit on sloped lots with more wind exposure and different drainage patterns than the flat ranch tracts. Ameristar roof penetrations and equipment need flashing and clearance detailing that accounts for foothill wind and rain runoff. We scope those jobs differently than a standard tract home replacement.
How do Santa Ana wind events affect scheduling an Ameristar construction or roof job in Upland?
We build schedules around the hot, windy weeks. Extreme heat and wind make roofing unsafe and can throw off material timing. We sequence exterior work for calmer windows and plan interior work like kitchen and bath remodels around the stretches when Upland’s temperatures climb. For roof or construction work, call (866) 505-5254 and we’ll map out a realistic schedule for your specific project.
Service Areas Near Upland
We serve Upland and the surrounding communities, including Ameristar service in Fullerton and Ameristar service in Stanton. Our Upland service area covers 91784, 91785, and 91786. For the full scope of what we do with the brand, see our Ameristar sales & service page.
Book Your Ameristar Service in Upland Today
If your Ameristar equipment is having trouble in Upland’s heat or you’re planning a kitchen, bath, or roof remodel, call (866) 505-5254. We’ll schedule a free estimate, walk the property, and give you a straight answer on what the job actually needs. Written line-item quotes. No games.
Written by Noel Cabrera, Owner at Daly City Construction, serving Upland, San Antonio Heights Ameristar service, and the surrounding foothill communities.