Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fontana, CA | Daly City Construction
We’re an independent construction and remodeling contractor serving Fontana, and we work with Ameristar repair in Bloomington and similar HVAC equipment on nearly every large remodel we take on here. The one thing that makes our Ameristar work different in Fontana is that we detail the construction around the equipment for this specific climate: 100°F summers, Santa Ana grit, and attics that hit 130°F. From kitchens and bathrooms to full roof replacements, we coordinate the Ameristar rough-in and the finish work under one license. Call (866) 505-5254 for a free estimate.
Why Fontana Residents Choose Us for Ameristar Service
We’ve been working alongside Ameristar condensers, air handlers, and furnaces across Fontana long enough to know exactly where they fail in this heat and this dust. The M4AC and M4SC single-stage condensers are builder-grade units, and they show up all over Fontana’s tract homes, especially in 92336 and 92337. Those units don’t get a lot of manufacturer love after year eight or nine, so homeowners end up with a contractor who knows the equipment. That’s us.
Noel Cabrera, our owner, grew up on a block in Daly City where half the houses were built in the same postwar wave, and he learned early that mechanical rough-ins and framing have to work together or neither one holds up. He trained in construction technology at City College of San Francisco before spending years on residential and commercial jobs across San Mateo and San Francisco counties. When we open a Fontana wall and find an Ameristar air handler that was undersized from the start, Noel knows what it means for the remodel and the roof. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix. That’s how we scope Ameristar work here.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Fontana
- Condenser coils and fan motors packed with foothill dust. Santa Ana winds whip grit from the San Gabriel and San Bernardino mountains through Fontana every fall. On 92336 and 92337 tract homes where Ameristar outdoor units sit exposed on the sun side, those fins clog fast. We strip, clean, and when the fan motor’s cooked, replace it with OEM Ameristar parts or a better-built aftermarket unit.
- Cracked drain pans in 120°F-plus attics. Older 92335 homes have attics that bake. Ameristar air handlers installed in those attics crack their plastic drain pans, and the condensate line fails right after. That water ends up in ceilings and cabinets below. We replace the pan and line set, then reframe the opening so the next install isn’t sitting in the same heat trap.
- Undersized builder condensers short-cycling through summer. Fontana hits 100°F for weeks at a time. The original tract installs often specified Ameristar units for a milder climate zone, so the condenser short-cycles, the compressor burns out, and the homeowner gets stuck with a repair bill every August. We tell the truth on 15-year-old units: sometimes a replacement is the better spend.
- Out-of-square walls and settling on 1950s ranchettes. Fontana’s south side has expansive clay soil, and those older homes move. When we install cabinetry or an Ameristar equipment closet in a 92335 ranchette, the walls are rarely straight. We reframe before the new work goes in, otherwise the cabinet doors bind and the mechanical chase doesn’t line up.
- Roof penetrations around Ameristar flues and line sets. In Fontana’s wind, any penetration that wasn’t flashed properly leaks within a season or two. We re-flash every roof penetration we touch on an Ameristar installation, whether it’s a full tear-off or a repair. Wind-driven rain doesn’t care how new the condenser is.
Ameristar Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana’s remaining undeveloped land is pushing new construction north into the wildland-urban interface zones below the San Gabriel and San Bernardino mountains. That’s the former Kaiser Steel mill land and the foothill parcels that sat vacant for decades. What it means for Ameristar equipment is a code layer most contractors don’t think about until the inspector flags it: ember-resistant detailing on roofing and mechanical penetrations. A flat inland Empire build in neighboring Rancho Cucamonga’s built-out tracts rarely triggers that requirement, unlike Ameristar in Rialto or similar foothill areas. But on a Fontana foothill job, the roof penetrations where an Ameristar flue and line set exit need specific flashing and mesh details to pass inspection. We build that into the scope from day one. It changes how we detail the roof, and it changes how we frame the mechanical chase inside. If you’re in 92336 or 92337 and your property backs up to open hillside, that requirement is coming for your re-roof or remodel sooner or later. Planning for it now costs less than a failed inspection later.
Ameristar Models & Products We Service in Fontana
We work on the full Ameristar value line: M4AC and M4SC single-stage split-system air conditioners, M4AH and M4MX air handlers, M801P and M802P 80% single-stage gas furnaces, and M4HP heat pumps. For compressors, fan motors, and control boards on units worth keeping, we source OEM Ameristar parts. For condensate pans, line sets, and fasteners, we spec quality aftermarket equivalents that hold up better in Fontana’s heat and grit than the factory plastic. We don’t stock every Ameristar part in a truck, but our Fontana supply chain gets OEM parts to a job site quickly, usually without holding up a remodel. When the equipment is older than 15 years and running through Fontana summers, we tell the homeowner straight: a repair might get you one more season, but a replacement is the smarter money. Our job is to give you the honest call.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fontana
Most Fontana homeowners want a ballpark before committing to a site visit. What drives the cost on Ameristar-related work is scope: whether we’re doing a cabinet install around an existing air handler, a full kitchen remodel that includes reframing the mechanical chase, or a roof replacement with ember-resistant flashing at every penetration. Here’s what we quote in Fontana:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
A free estimate includes a full walkthrough of your existing Ameristar setup, the condition of the roof penetrations, and what the remodel scope actually requires. No ballpark-by-phone that changes the moment we open a wall. Call (866) 505-5254 to schedule your estimate in Fontana.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well, along with nearby areas like Ameristar in Glen Avon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fontana
Yes. Fontana summers routinely top 100°F, and Ameristar’s builder-grade condensers, the M4AC and M4SC lines, are rated for exactly the climate zone they were installed in. When a tract install wasn’t sized for Inland Empire heat, the unit short-cycles, the compressor wears hard, and the fan motor runs continuously through dust season. We see Ameristar condensers in Fontana lose years of life compared to the same unit in a coastal city. Call (866) 505-5254 and we’ll tell you if your unit is sized right before you sink more money into repairs.
They can, but not without reframing first. Fontana’s older south-side homes sit on expansive clay soil, and the walls have settled over 70 years. We’ve yet to open a 92335 kitchen where the studs were straight. We reframe the cabinet run and the mechanical closet to square, then install the new Ameristar-compatible chase and cabinetry so the doors close and the equipment fits without shims stacked an inch deep.
A full roof replacement in Fontana runs $8,000 to $20,000 depending on the roof size, pitch, and whether the property is in a wildland-urban interface zone requiring ember-resistant detailing. If there’s an Ameristar unit on the roof or roof penetrations for the flue and line set, that adds to the scope because those penetrations need re-flashing and sometimes re-framing. We include all of that in the written estimate, no change orders later. Call (866) 505-5254 for an exact quote on your Fontana roof.
No. We are an independent contractor, not a manufacturer-authorized Ameristar dealer. We source OEM Ameristar parts for repairs on units worth keeping, but any manufacturer warranty on the equipment itself comes from the manufacturer and the original installer. Our workmanship is what we stand behind, along with the construction scope around the equipment. What that means for you: we’ll tell you honestly when an Ameristar unit should be repaired and when it’s time to replace it, because our loyalty is to the job, not the parts counter.
We schedule Fontana roof tear-offs and cabinet deliveries early in the day, because by afternoon the gusts through the foothill tracts can blow loose materials off a roof. We’ve had to call off afternoon tear-offs more times than we can count when the wind kicked up. Cabinets and Ameristar equipment we stage inside or strap down. Nobody wants a 50-mile-per-hour gust turning a cabinet door into a kite. Call (866) 505-5254 and we’ll put your Fontana job on the schedule with the wind in mind.
Service Areas Near Fontana
We run Ameristar service and full construction scope throughout Fontana’s four ZIP codes, 92335, 92336, 92337, and 92331. We also work in neighboring communities across the Inland Empire, and you can read more about our Fontana service area. For Ameristar equipment and remodel work east of here, see Ameristar service in Eastvale. For the Muscoy area north of the 210, check Ameristar service in Muscoy. And if you’re researching Ameristar equipment options in depth, our Ameristar sales & service page covers the full model line.
Book Your Ameristar Service in Fontana Today
Whether it’s a 92335 ranchette with settling walls or a foothill tract home in 92336 needing ember-resistant detailing, we’ll put the Ameristar equipment and the construction around it on the same plan, just as we do with Ameristar in Pedley. Call (866) 505-5254 for your free estimate in Fontana.
Written by Noel Cabrera, Owner at Daly City Construction, serving Fontana and the surrounding Inland Empire.