Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Abodu Construction in Garnet, CA | Daly City Construction
We’re Daly City Construction, an independent builder that offers Garnet Home Remodeling, sets, finishes, and repairs Abodu prefab backyard units across Garnet, and we’re one of the few crews in this stretch of the San Gorgonio Pass that plans every Abodu install around private wells, septic leach fields, and wind loads that would flatten a poorly fastened shell. If you’re researching an Abodu ADU on a rural Garnet lot, the first thing you need to know is that the factory unit is only half the project: the site work, foundation, and utility tie-ins are what make or break it out here. Call (866) 505-5254 and tell us what your lot looks like, and we’ll give you a straight answer on what it’ll take.

Why Garnet Residents Choose Us for Abodu Service
Most contractors see an Abodu unit as a box that shows up on a truck. We see it as a shell that has to survive San Gorgonio Pass wind, desert heat, and blowing sand while sitting on a lot that likely has no sewer line and no municipal water. Noel Cabrera trained in construction technology at City College of San Francisco and put in years on residential and light commercial work across San Mateo and San Francisco counties before taking on desert-lot ADU projects. He’s the first to say that a prefab shell is only as good as the foundation and flashing under it. Our crew has handled Abodu sales & service work long enough to know which factory details hold up in Garnet and which ones need upgrading before the unit ever sees its first wind event.
We’re an independent Abodu service provider, not a dealer and not an authorized partner. That matters in Garnet because we’re not tied to a showroom script. We stock factory connectors where the shell needs them and weather-rated aftermarket fasteners, sealants, and flashing where desert conditions demand more than the stock spec. If you’re in the 92258 ZIP and you need someone who already knows what the wind does to a module seam, or if you need Abodu in Morongo Valley, we’re already familiar with your roads.
Styles & brands we work with







Common Abodu Construction Problems We Solve in Garnet
- Loose pass-thru and panel-joint fasteners from sustained pass wind. The San Gorgonio Pass is one of the windiest corridors in Southern California, and on exposed Garnet lots we regularly see factory-installed fasteners back out over a season or two. You’ll hear rattling wall panels or see hairline cracks forming at module seams. We re-torque and replace with weather-rated hardware, then re-detail the joint so it stops moving.
- Roof-to-wall connections lifting after wind events. Abodu roofs are engineered, but the stock flashing where factory trim meets site-built fascia was often spec’d for calmer sites. On Garnet lots with open desert exposure, that transition pulls and lets water into the wall cavity. We re-flash, re-seal, and upgrade the connection so the next wind storm doesn’t peel it back open.
- Sun-blasted finish failures on west-facing walls. Desert heat plus blowing sand chews through stucco, sealant, and paint faster than any coastal site. West-facing Abodu walls in Garnet show checking and peeling within a few summers. We strip, re-seal, and repaint with finishes that actually hold up to abrasive wind and 110-degree afternoons.
- Undersized water and waste lines on well-and-septic lots. A factory plan assumes a short, city-pressure water run and a sewer stub. Garnet properties run on private wells and septic, which means runs are longer, pressure is lower, and leach-field setbacks can sit right where the factory drawing shows a waste line. We re-route, re-size, and insulate before the unit is set, not after.
- Foundation and hold-down issues on non-standard site-built pads. Many Garnet parcels have older, owner-built pads or no pad at all. Setting an Abodu on an undersized or unpermitted slab is a structural gamble. We over-excavate where needed, pour an engineered foundation with upgraded wind hold-downs, and bring the base up to code before the shell arrives.
Abodu Service in Garnet: What Local Conditions Mean for Your Equipment
Here’s the part nobody tells you until you’ve already bought the unit: Garnet’s large-lot parcels run on private wells and septic, so setting an Abodu here is really a siting decision. The unit’s footprint, the water line run, and the waste stub-out all have to be fitted around the existing leach field and well setback before the factory order gets placed. That constraint doesn’t exist on a sewered tract lot in Palm Springs or on Abodu repair in Desert Hot Springs. On a rural road off the main pass, we set an Abodu Two where the only buildable spot sat between the private well head and the existing leach field. Our crew over-excavated the pad, set the unit on an engineered foundation with upgraded wind hold-downs, and re-routed the water line to the well with a shorter, insulated run. Then we re-flashed and re-sealed every module joint and roof edge for the pass wind. That unit passed county inspection and has held through two windy spring seasons without a seam opening up. That’s the standard we apply to every Abodu project in Garnet, because out here the site work decides whether the factory shell survives.
Abodu Models & Products We Service in Garnet
We work on the full Abodu line: the Abodu Studio / Junior for single-room setups, the Abodu One one-bedroom, the Abodu Two two-bedroom, and expansion modules or site-built additions and decks tied to a delivered shell. The difference in our approach is parts sourcing. Where the shell or structural system is involved, we use Abodu’s own factory parts and connectors. Where the desert demands better than stock, we switch to aftermarket flashing, sealants, and weather-rated fasteners that actually hold in Garnet’s wind and heat. On a sound shell we repair and re-detail rather than replace. Full replacement only makes sense when wind or water has already compromised the structural frame itself, which we’ve seen on a handful of older units with years of neglected seam maintenance.
See the difference
Before
After
Before
After
Before
AfterAbodu Service Pricing in Garnet
Here’s what Abodu construction work actually costs on a Garnet property with our General Contractor in Garnet, based on the site conditions we see out here.
| Service | Price Range |
|---|---|
| ADU Construction (Abodu unit set, foundation & utility tie-in) | $90,000 – $220,000 |
| Home Addition (site-built addition tied to an Abodu unit) | $45,000 – $130,000 |
| Roof Repair (Abodu roof edge, flashing & wind-damage repair) | $400 – $1,800 |
| Metal Roof Installation (Abodu unit roof upgrade) | $15,000 – $40,000 |
What drives the cost in Garnet is almost always the lot: how far the well is from the unit, where the leach field sits, whether the existing pad is usable, and how much wind detailing the shell needs. A free estimate from us includes walking the site, checking those constraints, and giving you a line-item quote so you know exactly where the money goes. Call (866) 505-5254 and we’ll come out.
Serving Garnet, CA — Our Local Coverage Area
We’re based in the Garnet area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Abodu Construction in Garnet
Yes, but the unit has to be sited around the existing well setback and leach field before the order is placed. The footprint, water line run, and waste stub-out all have to clear county setback requirements, and in many cases the factory plan needs re-routing. We handle that siting work first, then build the pad and set the unit. Call (866) 505-5254 if you want us to look at your lot before you order.
The pass wind loosens panel-joint fasteners, pulls at roof flashing where factory trim meets site-built fascia, and can open hairline cracks at module seams on exposed lots. The fix is upgraded wind hold-downs, re-flashed roof edges, and weather-rated fasteners at every pass-thru. We do that work on new sets and on existing units that have started rattling.
No. We’re an independent builder and service provider. We’re not affiliated with Abodu and we’re not a dealer. That means we’re free to use factory parts where they’re right and better aftermarket materials where desert conditions demand them. We tell you which is which on every job.
Plan on $90,000 to $220,000 for the full ADU construction, including the unit set, foundation, and utility tie-ins on a well-and-septic Garnet lot. Site-built additions tied to an Abodu shell run $45,000 to $130,000. Your exact number depends on well distance, leach-field location, pad condition, and wind detailing. Call (866) 505-5254 for a free estimate that breaks it down line by line.
Yes. Roof edge, flashing, and wind-damage repair runs $400 to $1,800, and if the roof needs a full upgrade to metal, that’s $15,000 to $40,000. We repair and re-detail sound shells; we only recommend replacement when the structural frame itself is compromised. Call (866) 505-5254 and we’ll come assess what the wind actually did.
Service Areas Near Garnet
We run Abodu service across Garnet service area and into the surrounding desert communities. If you’re outside the 92258 ZIP, we also cover Abodu service in Palm Springs and Abodu service in Desert Edge, where the wind and well-and-septic constraints are different but our standard for an engineered set doesn’t change. The pass is a narrow corridor, and we already know these roads.
Book Your Abodu Service in Garnet Today
If you’re planning an Abodu unit on a Garnet lot, let us walk the site before you order. Call (866) 505-5254 to schedule a free estimate, and Noel will give you a straight answer on siting, foundation, utilities, and wind detailing. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Garnet and the San Gorgonio Pass.