Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Los Gatos, CA | Daly City Construction
We provide independent Dvele service and construction across Los Gatos, from downtown Craftsman remodels to full modular sets in the 95033 hills. The one thing that makes Dvele work different here is the ground it sits on: Los Gatos straddles three permitting jurisdictions, and a Dvele module set on a steep hillside foundation behaves nothing like one set on flatland clay. If you own a Dvele home or are planning one in Los Gatos, call (866) 505-5254 for a straight assessment.

We’ve spent years assembling and finishing Dvele prefabricated modular homes across the Santa Cruz Mountains foothills. Our crew knows how Dvele’s panelized wall and floor systems behave once they meet hillside foundations and wildland-urban interface detailing. We are an independent contractor, not a Dvele-authorized dealer, which means every structural connection, finish transition, and weatherproofing detail gets scrutinized on its own merits, not against a brand directive. For Dvele work in Los Gatos, that matters more than anywhere else we operate. Learn more about our Dvele sales & service experience.
Why Los Gatos Residents Choose Us for Dvele Service
Noel Cabrera grew up in Daly City’s Westlake district, where half the houses on his block were built in the same postwar tract-home wave. That’s where he learned what happens when a house gets built fast and then asked to hold up against decades of fog, rain, and shifting ground. He trained in construction technology at City College of San Francisco, then put in years swinging a hammer on residential and light commercial jobs across San Mateo and San Francisco counties before turning his attention to prefab and modular systems like Dvele, including Dvele in Lexington Hills.
Los Gatos homeowners call us because we don’t treat a Dvele module like a stick-built house that happened to arrive on a truck. We know which panel connectors Dvele used, where the factory sealant typically fails, and how a closed-wall envelope reacts when the summer heat hits 100 degrees and the winter rain comes sideways off the mountains. We stock the original panel connectors, sealants, and trim profiles where they’re still available, and we carry quality aftermarket flashing for when OEM lead times would stall a hillside remodel. For full-scope Dvele work across the Los Gatos service area, one call covers the entire project.
Styles & brands we work with







Common Dvele Construction Problems We Solve in Los Gatos
- Panel-to-foundation movement on hillside pier-and-grade systems. In the 95033 slopes, Dvele modules set on pier-and-grade foundations shift as the hillside settles. Differential movement shows up as drywall cracks radiating from corners and doors that suddenly don’t latch. We re-shim and re-torque the connections, then verify the load path before patching finishes.
- Closed-wall panel seam failures from hot-dry summers. Dvele’s closed-panel envelope assemblies are sealed at the factory, but Los Gatos summers bake the exterior sealant until it shrinks and cracks. Winter rain then finds those seams. We remove the failed sealant, prep the joint, and apply a sealant rated for the temperature swings we actually get here.
- Roof-to-wall transition flashing gaps on tile or metal roofs. Wind-driven winter rain off the Santa Cruz Mountains tests every flashing detail. On Dvele modules where the roof-to-wall transition was sealed at the factory, gaps appear at the module joints. We re-flash those transitions under the existing roof system, typically standing seam metal or tile.
- WUI-edge ignition-resistant detailing gaps. Lots near the wildland-urban interface in Los Gatos have defensible-space material requirements that the factory module seams don’t always meet. We add flashing and trim at the module joints so the exterior cladding holds its ignition-resistant rating.
- Exterior penetration leaks through closed-wall panels. Vent terminations, hose bibs, and exterior outlets cut through Dvele’s factory wall panels. The factory sealant around those penetrations fails over time, especially on the hot western exposures common on Los Gatos hillsides. We reseal each penetration and, where the surrounding panel has degraded, we repair the envelope before it becomes a structural problem.
Dvele Service in Los Gatos: What Local Conditions Mean for Your Equipment
A lot off Highway 17 in the 95033 hills may sit in unincorporated Santa Cruz County while the parcel next door falls under Town of Los Gatos or Santa Clara County jurisdiction. That split controls which WUI material requirements apply, which inspector signs off, and what fire-resistive detailing the Dvele module must meet. On a Dvele build, we confirm the permitting authority and its WUI requirements before we set a single panel. We learned that lesson on a Dvele modular set in the 95033 hills above Highway 17, where the panel-to-foundation connections had worked loose on a pier-and-grade foundation and drywall cracks were tracking up the interior walls, and we apply the same rigor to Dvele service in Saratoga. Our crew re-shimmed and re-torqued the connections, re-flashed the module roof-to-wall transition under new standing seam, and resealed the exterior penetrations to close the air leaks the hot summer had opened. The homeowner had a tight, dry envelope again without touching the interior finishes we had just installed. That’s Dvele work in Los Gatos: the module is only as good as the connection to the ground and the flashing at the seams.
Dvele Models & Products We Service in Los Gatos
We service the Dvele Signature series, the company’s custom modular home line, along with Dvele prefabricated wall and floor panel systems and the closed-wall, energy-efficient envelope assemblies that come with them. Our approach on every Dvele project is repair-and-reseal first. Most seam and penetration failures are fixable without tearing into the module, so we default to Dvele’s original panel connectors, sealants, and trim profiles where they’re still available, and we switch to quality aftermarket flashing and connectors only when OEM lead times would stall a hillside build. For Los Gatos owners, that means faster turnaround without sacrificing the envelope’s original design intent.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Los Gatos
Dvele service costs in Los Gatos depend on what’s actually failing and where the module sits. A simple roof repair runs less than a full kitchen remodel inside a Dvele home. Here are the ranges we quote most often:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
Your free estimate includes a site visit, a written line-item quote, and a straight answer on whether the fix is repair-and-reseal or full panel replacement. Call (866) 505-5254 to schedule yours.
Serving Los Gatos, CA — Our Local Coverage Area
We’re based in the Los Gatos area and know this community well, and we also handle Dvele repair in Monte Sereno. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Los Gatos
A Dvele roof repair in Los Gatos typically runs $400 – $1,800, while a full kitchen remodel inside a Dvele home ranges from $14,000 – $45,000. Hillside lots in the 95033 area often add cost because of access, foundation verification, and WUI detailing. Call (866) 505-5254 for an exact quote – estimates are free.
We are not authorized by Dvele. We are an independent contractor with years of hands-on experience assembling and finishing Dvele modular homes across the Santa Cruz Mountains foothills. That independence means we evaluate every connection and seal on its own performance, not against a brand directive.
We default to Dvele’s original panel connectors, sealants, and trim profiles where they’re still available. When OEM lead times would stall a hillside build, we switch to quality aftermarket flashing and connectors that meet or exceed the original spec. We’ll tell you which we’re using and why before work starts.
Dvele modules set on pier-and-grade foundations in the 95033 hills shift as the hillside settles, and the panel-to-foundation connections loosen. That movement shows up as drywall cracks and misaligned doors, not as structural failure. We re-shim and re-torque the connections, then patch finishes. Call (866) 505-5254 if you’re seeing cracks appear.
We service the Dvele Signature series, Dvele prefabricated wall and floor panel systems, and Dvele closed-wall envelope assemblies across Los Gatos, including the 95030, 95031, 95032, and 95033 ZIP codes, plus Dvele service in Cambrian Park. If your module is a Dvele build and it’s having an envelope or connection issue, we can assess it.
Service Areas Near Los Gatos
We take Dvele projects across the mid-Peninsula and South Bay, including Dvele service in Highgrove, Dvele service in Highland, and nearby communities like Daly City, Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane. If your Dvele home sits in the hills above Los Gatos or on a flatland lot downtown, we can get a crew there.
Book Your Dvele Service in Los Gatos Today
If your Dvele module has cracked drywall, a leaking seam, or a roof transition that’s letting water in, call (866) 505-5254. We’ll schedule a visit, assess the envelope, and give you a written quote. Independent Dvele expertise, Los Gatos conditions, one accountable contractor.
Written by Noel Cabrera, Owner at Daly City Construction, serving Los Gatos and the surrounding foothills.