Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Banning, CA | Daly City Construction
We install and repair Unilock paver driveways, patios, walkways, and retaining walls across Banning, CA, and offer Unilock repair in Yucaipa. As an independent contractor, not a manufacturer-authorized dealer, we bring product-specific installation knowledge without being locked into a single supplier’s inventory. What makes our Unilock work different in Banning is that we engineer every base, joint, and edge restraint for the San Gorgonio Pass wind corridor, where sustained 40 – 60 mph gusts tear apart installations that would hold up fine in Riverside or Redlands. If you’re planning a paver driveway, patio, or hardscape addition in Banning, call (866) 505-5254 for a free estimate.
Why Banning Residents Choose Us for Unilock Service
We’ve installed Unilock pavers on Banning’s stucco-on-frame tract homes, hillside lots, and manufactured home communities long enough to know which products survive here and which ones don’t. Brussels Block looks great on a showroom pallet, but its chamfered edges are the first thing to chip when wind-driven grit hits them at 50 mph. U-Cara walls need deeper footings in this soil than the standard spec calls for. These are the details we handle before the first paver goes down.
Noel Cabrera, our owner, came up doing framing and renovation work on fog-weathered Daly City homes, where moisture barriers and structural attention separated good work from cosmetic patches. That same discipline applies to hardscape in Banning. A paver patio is a structural system: base, bedding, pavers, joints, edge restraint. Skip the edge restraint or use cheap sand and the wind will find it. We don’t skip steps, and we don’t install products we wouldn’t put on our own property.
As a Banning General Contractor, we handle hardscape, driveways, and home additions under one license. When you need a paver driveway and a room addition, you’re not coordinating two companies. You’re calling one number: (866) 505-5254.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Banning
- Wind-lifted Brussels Block edges. The windward side of a Banning driveway takes sustained lateral pressure during Santa Ana events. Without reinforced edge restraints and high-bond polymeric sand, the outer rows lift and shift. We reset the base and upgrade the restraint system.
- U-Cara wall movement on expansive soils. Banning’s clay-heavy ground expands and contracts with moisture, and U-Cara walls without an engineered drainage layer start leaning within two or three seasons. We rebuild with proper gravel backfill, drainage pipe, and geogrid where the wall height demands it.
- Polymeric sand joint erosion. Standard joint sand blows out of Beacon Hill pavers in a single windstorm. We re-sand with Unilock’s high-bond poly sand and compact it properly, which holds through the next several wind seasons.
- Chipped and pitted paver surfaces. Wind-blown sand acts like a sandblaster on south- and west-facing Unilock surfaces in Banning. Older pavers show edge chipping and surface pitting. Where the pavers are structurally sound, we replace individual units and re-sand rather than tearing out the whole patio.
- Settlement across multiple paver types. Banning’s mix of expansive clay and wind-eroded topsoil means an improperly compacted base settles unevenly. We excavate to the right depth, compact in lifts, and use quality aftermarket base materials so the Unilock surface stays flat.
Unilock Service in Banning: What Local Conditions Mean for Your Equipment
Banning sits at the San Gorgonio Pass, one of the windiest corridors in Southern California. Sustained gorge winds regularly exceed 40 – 60 mph, and the failure pattern we see over and over is lifted or torn-off paver edges on the windward side of homes after a single Santa Ana event. This isn’t a cosmetic issue; it’s a structural one. In Banning’s Nicklin Park neighborhood, we saw a Brussels Block driveway where the entire windward edge row had lifted a half-inch after one wind season because the original installer used plastic edge restraints and standard polymeric sand. We reset the base, upgraded to Unilock’s high-bond polymeric sand, and installed reinforced edge restraints. The homeowner reported no movement through the next wind season. Nobody does this work with a template, because the template doesn’t account for the Pass. If you’re searching for Unilock sales & service from a contractor who actually builds for this wind, call us.
Unilock Models & Products We Service in Banning
We work with Brussels Block, Beacon Hill, and U-Cara paver and wall lines, plus Techo-Bloc as a comparable alternative when the project calls for it. We use Unilock’s OEM edge restraints, caps, and polymeric sand to maintain system integrity. For base and subsurface prep, we source quality aftermarket materials that meet or exceed spec. When your existing Unilock paver surface is structurally sound but joints or edges have failed, targeted repair is usually the cost-effective route. Widespread settlement or wind-lifted sections call for partial or full replacement. We stock common Unilock pavers and joint sand locally in our service network, which means faster turnaround for Banning residents than waiting on a far-away distributor. If your Unilock project is part of a larger renovation, like a home addition or kitchen remodel, we handle that under the same contract through our Banning service area coverage.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Banning
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
These ranges reflect what we see across Banning’s housing stock, from mid-century stucco tract homes to newer hillside builds, and we also provide Unilock service in Valle Vista. Your actual cost depends on square footage, access, base depth, whether we’re doing a repair or full replacement, and which Unilock product line you choose. A free estimate from us includes a site visit, measurements, wind-exposure assessment, and a written line-item quote. No change-order surprises. Call (866) 505-5254 to schedule yours.
Serving Banning, CA — Our Local Coverage Area
We’re based in the Banning area and know this community well, and we also provide Unilock in Calimesa. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Banning
We install reinforced edge restraints, compact the base in lifts to prevent lateral movement, and use Unilock’s high-bond polymeric sand rather than standard joint sand. The edge restraint is the critical piece. In Banning’s wind corridor, plastic snap-edge restraints fail. We use heavier aluminum or concrete restraints that anchor the perimeter. Call (866) 505-5254 for an on-site wind assessment of your existing pavers.
Yes, but not without preparation. Expansive clay in Banning moves with moisture, so we excavate deeper than a standard installation, compact a quality base in lifts, and often add a geotextile separator. This keeps the base from mixing with the clay below and prevents the settlement and wall movement we see on under-engineered jobs.
For wind-exposed hillside patios, we recommend Brussels Block for its weight and interlock, or Beacon Hill for a more refined look. The product matters less than the installation system: reinforced edge restraints, high-bond joint sand, and proper drainage. For retaining walls on a sloped Banning lot, U-Cara with engineered drainage and geogrid holds up far better than a dry-stacked wall.
Wind-driven sand acts as a low-grade sandblaster. On south- and west-facing Unilock surfaces, we see chamfered edge chipping and surface pitting on Brussels Block within a few seasons. Re-sanding joints annually and choosing pavers with less pronounced chamfers can extend the surface life. When individual pavers are damaged, we replace units rather than the whole surface.
We stand behind our workmanship with a written workmanship warranty on every Unilock installation we complete in Banning. Unilock pavers themselves carry manufacturer warranties. The warranty you need to think about in Banning is the installation warranty, because wind and soil movement are the real threats here, not the paver itself. Call (866) 505-5254 for details on what we cover.
Service Areas Near Banning
We serve Banning and nearby communities throughout the San Gorgonio Pass and Inland Empire. If you’re in Unilock service in Murrieta or Unilock service in Cabazon, we cover those areas too. Broadmoor, Colma, Visitacion Valley, Noe Valley, and Brisbane round out our Northern California roots, but our Unilock work is focused where the wind shapes the build.
Book Your Unilock Service in Banning Today
Tell us what the house needs, not what you think it needs. Then we’ll figure out the right fix. Call (866) 505-5254 to schedule your free Unilock estimate in Banning. We’ll walk the site, check the wind exposure, and give you a written quote with real numbers.
Written by Noel Cabrera, Owner at Daly City Construction, serving Banning and the San Gorgonio Pass.