Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Freedom, CA | Daly City Construction
We provide independent Unilock paver, wall, and step installation and repair across Freedom, California, including our Home Remodeling in Freedom. What makes our Unilock work here different is that we build for Pajaro Valley conditions: fog, winter rains, agricultural dust, and Santa Cruz County permitting on every rural parcel. Daly City Construction handles the full scope, from base excavation to final polymeric sand, under one point of contact. Call (866) 505-5254 for a free estimate.

Why Freedom Residents Choose Us for Unilock Service
Unilock pavers are a serious investment, and in Freedom they live a hard life. Damp marine air off Monterey Bay, heavy winter runoff, and soil that shifts between saturated and bone-dry all put stress on paver systems that were installed without proper base preparation. We know what holds up here because we have torn out enough failed installations around the Pajaro Valley to see exactly where corners get cut, and that same expertise guides our General Contractor in Freedom work.
Noel Cabrera, the owner at Daly City Construction, grew up in Daly City’s Westlake district watching his uncle re-frame a garage. He trained in construction technology at City College of San Francisco and spent years on residential and light commercial jobs across San Mateo and San Francisco counties. That background shaped how we approach every Unilock project in Freedom: excavation depth, base compaction, edge restraint, and drainage come before anything cosmetic. We are an independent Unilock service provider, not a manufacturer affiliate. We source Unilock products because they perform, and we stand behind our workmanship, not someone else’s warranty. For Unilock sales & service done right, call (866) 505-5254.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Freedom
Here are the failures we see most often on Unilock installations around Freedom, and what causes them locally:
- Efflorescence and salt bloom on Brussels Block pavers. Freedom’s fog and damp marine air keep paver surfaces moist for long stretches. Without proper drainage under the bedding layer, mineral salts wick up through the concrete and leave a chalky white residue. We clean it with Unilock’s OEM cleaners and fix the drainage that caused it.
- Settling and heaving on rural parcels. Many Freedom properties sit on former agricultural land with loose, organic subgrade. When winter rains saturate the ground and base compaction was inadequate, sections of paver driveways sink or lift within two seasons. We excavate to the correct depth, compact class II base in lifts, and install a geotextile separator where the soil is soft.
- Joint sand erosion and weed growth. Heavy winter runoff across unincorporated Freedom properties washes standard joint sand out fast. Without proper edge restraint, the outer courses shift and weeds take root in the gaps. We re-sand with Unilock’s polymeric sand and install edge restraints that hold the entire field together.
- Color fading and surface wear on Beacon Hill pavers. Constant moisture plus agricultural dust from surrounding Pajaro Valley fields creates a fine abrasive film on paver surfaces. Over time, the face of the paver wears thin. We assess whether the pavers are structurally sound and recommend cleaning and sealing, or selective replacement, depending on wear.
- Drainage failures on sloped driveways. Many Freedom homes sit on gently sloping lots that send runoff straight across paver surfaces. Without a French drain or swale along the uphill edge, water undermines the base layer. We design drainage into every paver project from the start, not as an afterthought.
Unilock Service in Freedom: What Local Conditions Mean for Your Equipment
Here is what most Unilock installers will not tell you about working in Freedom: the county runs this town, not a city hall. Freedom is unincorporated, so every paver driveway, patio, or retaining wall above a certain height goes through Santa Cruz County building and planning departments. On rural parcels, that often triggers agricultural review and septic or well inspection alongside the standard building permit. Plan on additional weeks in the timeline compared to a simple city permit in Watsonville.
What that means for your Unilock project: we file the paperwork, schedule the inspections, and build the base to county standards the first time. On a rural parcel off Larkin Valley Road, we installed a Unilock Brussels Block driveway and patio for a farmhouse that had been plagued by muddy runoff. We excavated 12 inches, laid a geotextile separator, compacted class II base, set the pavers with polymeric sand, and added a French drain along the uphill edge. Three winter storms later, the surface drains clean and the joints hold tight. That is what Freedom-specific Unilock work looks like.
Unilock Models & Products We Service in Freedom
We work across the Unilock lines that make sense for Freedom properties. Brussels Block is our go-to for driveways and patios that need old-world texture with modern load-bearing performance. Beacon Hill works well for large patio areas and walkways where clean lines matter. For retaining walls and steps, we install Unilock Estate Wall and Lineo Stone systems with geogrid reinforcement where the county requires engineering.
On repairs, we use Unilock’s OEM joint sand, edge restraints, and cleaners to maintain system integrity. Aftermarket products change the water-permeability profile and compromise the system. We stock the common joint sands and restraints locally so Freedom repairs do not wait on a shipment. When pavers are structurally sound, we repair individual units or redo base sections. We replace whole surfaces only when settlement or drainage failure makes repair a bad investment.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Freedom
What you pay for Unilock construction in Freedom depends on access, base conditions, drainage requirements, and square footage. Rural parcels with soft subgrade cost more because the excavation goes deeper and the base prep takes longer. Here are the market ranges we work within:

| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every estimate from us is free and written line by line. No change orders once the job scope is set unless the county inspector requires something new. Call (866) 505-5254 to schedule your free estimate.
Serving Freedom, CA — Our Local Coverage Area
We’re based in the Freedom area and know this community well, and we also offer Unilock in Corralitos. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Freedom
Yes. Freedom is unincorporated, so paver driveway and patio projects go through Santa Cruz County building and planning rather than a city building department. Rural parcels often trigger agricultural and septic or well review alongside the standard permit, which adds time. We handle the entire permit process for you. Call (866) 505-5254 and we will walk you through what applies to your property.
Fog and damp marine air keep paver surfaces wet for extended periods, which drives efflorescence, surface wear, and subgrade saturation. Proper base drainage, a geotextile separator where soil is soft, and Unilock’s OEM polymeric sand all reduce those risks. Call (866) 505-5254 for an estimate that accounts for your property’s drainage.
In most cases, yes. Brussels Block is a current Unilock line, so factory-fresh units blend with existing pavers once they weather for a season. We also check the base under the repaired section so the same problem does not return. Call (866) 505-5254 for a paver repair assessment in Freedom.
Weeds establish when joint sand washes out and organic debris collects between pavers. The fix is Unilock’s polymeric sand combined with solid edge restraint around the entire field, plus drainage that keeps winter runoff from flushing the joints. We install it that way on every Freedom job. Call (866) 505-5254 to schedule a joint re-sand.
County permit timelines in Santa Cruz County vary, but rural agricultural review and septic or well checks can add two to four weeks before we break ground. Once permitted, most residential paver driveways and patios take three to seven days of work, weather-dependent. Call (866) 505-5254 and we will give you a realistic timeline for your specific parcel.
Service Areas Near Freedom
In addition to Freedom, we serve the surrounding Pajaro Valley and the broader region. That includes Unilock service in Interlaken, Unilock service in Watsonville, plus Daly City, Broadmoor, Colma, Brisbane, and nearby San Mateo County communities. If your property sits between jurisdictions, we can tell you which building department governs your project. See our Freedom service area page for details.
Book Your Unilock Service in Freedom Today
Tell me what the house needs, not what you think it needs, then we will figure out the right fix. That is how Noel Cabrera approaches every Unilock project in Freedom, just as he does with Unilock service in Amesti. Call (866) 505-5254 to schedule your free estimate, and we will come out to walk the site and give you a written, line-item price.
Written by Noel Cabrera, Owner at Daly City Construction, serving Freedom and the Pajaro Valley.