Unilock Construction in Lexington Hills, CA

Unilock Construction in Lexington Hills, CA | Daly City Construction

Daly City Construction provides independent Unilock installation and repair across Lexington Hills, CA. We’re not a manufacturer-authorized dealer, and we don’t pretend to be. What separates our Unilock work here is simple: we build for steep private roads, heavy winter runoff, and high fire-severity terrain that flatland contractors never see. If your Brussels Block driveway is rutting or an Estate Wall is leaning, call (866) 505-5254 for an honest assessment of what’s worth repairing and what needs a rebuild.

Call (866) 505-5254

Why Lexington Hills Residents Choose Us for Unilock Service

We’ve laid Unilock pavers and walls on slopes where the delivery truck has to stage at the bottom and material goes up in a skid steer. That’s normal for us in Lexington Hills. Noel Cabrera, our owner, grew up in Daly City’s Westlake district and trained in construction technology at City College of San Francisco before spending years on residential jobs across San Mateo and San Francisco counties. He knows what fog-weathered, steep-terrain homes demand. But the reason Lexington Hills homeowners call us for Unilock work is that we’re honest about what happens when a paver driveway fails on a 12% grade. We’ll tell you what the house needs, not what you think it needs, then we’ll figure out the right fix.

We use Unilock’s own matching units and system components where they exist. Where Unilock doesn’t supply a base aggregate, geogrid, or edge restraint, we use quality aftermarket materials that hold up to mountain drainage. And because we’re a full-scope general contractor with 50+ manufacturer partnerships, we see your Unilock hardscape as part of the whole property, not a standalone patch job. One contractor, every phase.

Common Unilock Construction Problems We Solve in Lexington Hills

• Base failure on slope-edge paver driveways. Winter rain sheeting off steep private roads in Lexington Hills undercuts a thin aggregate base and pavers shove and rut within a season or two. This is the most common Unilock driveway problem we rebuild here.
• Joint-sand washout and moss on shaded patios. North-facing, heavily shaded Brussels Block patios never fully dry after atmospheric-river storms. Joint sand washes out, moss and algae move in, and pavers shift. We re-sand, re-grade, and often add drainage so it stops recurring.
• Estate Wall units tilting or bulging. Where a wall was built without engineered tie-backs or proper drainage behind it on a cut hillside, Unilock Estate Wall units lean and bulge. In Lexington Hills, that hillside is usually steeper than the original installer planned for.
• Polymeric sand and edge restraint failure at driveway aprons. Tight aprons where vehicle loads meet rutted, poorly drained mountain road transitions chew up edge restraints. The pavers spread and the apron crumbles. We replace the restraint, re-compact, and re-sand.
• Drainage flowing through the paver field instead of around it. On sloped Lexington Hills lots, one missed swale or a too-low edge sends storm runoff straight through the pavers, washing out the joint sand and destabilizing the base. We fix the drainage first, then the pavers.

Unilock Service in Lexington Hills: What Local Conditions Mean for Your Equipment

Lexington Hills sits in high fire-severity terrain within ZIP 95031. That one fact changes how Unilock hardscape work gets judged here. Noncombustible wall and paver assemblies matter, but so does keeping hardscape clear of the home’s ignition zone. An Estate Wall hugging the foundation with cedar mulch behind it is an ember trap. A Brussels Block patio with a wooden pergola covered in dry leaf litter is fuel. On a valley lot in San Jose, or with Unilock service in Monte Sereno, that same patio is just a patio. In Lexington Hills, it’s either defensible or it’s not. Noel’s crews plan Unilock installations with ember-resistant detailing, proper setbacks, and clean non-vegetated edges. The hardscape doesn’t just survive a fire event; it can slow one down. That’s the difference between building here and building anywhere.

Then there’s access. Narrow private mountain roads and steep driveways in Lexington Hills limit concrete truck, crane, and delivery reach. Staging gets planned before a shovel hits the dirt. We’ve had Brussels Block pallets hand-carried the last hundred feet when a skid steer couldn’t make the turn. That planning is the job before the job, and it’s why our driveways hold up where others wash out.

On a wooded parcel off a narrow private lane in Lexington Hills, our crew rebuilt a rutted, washed-out Brussels Block driveway that a previous installer had laid over a too-thin base with no drainage, similar to Unilock repair in Scotts Valley. We re-graded the slope, set a deeper compacted aggregate base with geogrid, added a drainage swale and edging, and re-laid the Brussels Block with fresh joint sand so storm runoff now sheds away from the house instead of through the pavers.

Unilock Models & Products We Service in Lexington Hills

We install and repair Brussels Block, the tumbled traditional paver that handles Lexington Hills driveways when the base is built right. We also work with Brussels Dimensional Stone for cleaner modern patios, Unilock Estate Wall for retaining and freestanding walls on cut hillsides, and Beacon Hill Wall for lower garden and terrace walls.

For repairs, we match Unilock’s own units so a patched area blends with the original install. For base work, geogrid, and edge restraint, we use quality aftermarket products rated for the drainage loads we see in the Santa Cruz Mountains. We keep common Unilock units and joint sand available for faster Lexington Hills turnaround, and for less common pieces we’ll order direct and schedule the Unilock repair in Cambrian Park or here as soon as material lands.

An honest note: isolated paver or wall-unit repairs are usually worth doing. A drive or wall with failed base on a slope is often a rebuild. We’ll tell you which one you’re facing before we quote anything.

Unilock Service Pricing in Lexington Hills

FAQs – Unilock Construction in Lexington Hills

Service Areas Near Lexington Hills

We provide Unilock construction service to Lexington Hills and surrounding Santa Cruz Mountains communities. If you’re nearby, see our Unilock service in Lompico page or our Unilock service in Ben Lomond page for details specific to those areas.

Book Your Unilock Service in Lexington Hills Today

If your Unilock driveway, patio, or wall is failing in Lexington Hills, call (866) 505-5254. We’ll schedule a site walk, give you a straight repair-versus-rebuild answer, and put a written price in your hand.

Written by Noel Cabrera, Owner at Daly City Construction, serving Lexington Hills and the Santa Cruz Mountains.