Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Brisbane, CA | Daly City Construction
We install and repair Unilock pavers, retaining walls, and driveways across Brisbane, CA. What makes our Unilock work here different is simple: Brisbane is a town built on slopes, and a paver system that holds flat in South San Francisco will creep, settle, or rotate here if the base and drainage aren’t engineered for the grade. Call (866) 505-5254 for a free estimate on Unilock paver driveways, patios, and retaining walls in Brisbane. We’re an independent contractor, not Unilock-affiliated, and we specify their products to manufacturer and geotechnical standards.
Why Brisbane Residents Choose Us for Unilock Service
We’re a full-scope general contractor, which means when we install a Unilock driveway, we also handle the grading, the drainage, and the retaining wall behind it. Most Brisbane General Contractor outfits can lay pavers. Fewer can key a base into engineered fill, spec geogrid, and tie an outlet into a swale so the whole system survives a San Bruno Mountain winter. That’s where we come in.
Noel Cabrera, our owner, grew up across the county line in Unilock in Daly City‘s Westlake district and trained in construction technology at City College of San Francisco before putting in years on residential jobs across San Mateo County. He’s spent enough time on terraced Brisbane lots to know that a retaining wall here is never just a wall. It’s holding back a hill. We treat every Unilock project in Brisbane that way, from a 300-square-foot patio to a full paver driveway replacement.
We use Unilock OEM wall and paver components where they match the existing system, and quality aftermarket geogrid, drainage aggregate, and polymeric joint sand where performance demands it. If a wall is showing structural movement, we recommend rebuild, not cosmetic patching. Tell us what the hillside is doing, and we’ll spec the right fix.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Brisbane
Every hillside town has its own failure patterns. In Brisbane, here’s what we see most often:
- Paver settlement and creep on sloped driveways. When a base isn’t keyed into engineered fill or tied with geogrid, the whole field slowly walks downhill. Brisbane’s grade changes make this the top callback we get for paver driveways. We pull the failed section, re-grade, compact in lifts, and tie the system together so it stops moving.
- Surface erosion and sand loss at wall tops. Concentrated runoff from the canyons above town scours the joint sand right out of pavers at the top of retaining walls. On Unilock Brussels Block and Beacon Hill surfaces, we replace plain sand with polymeric joint sand and re-establish positive drainage so water doesn’t sit against the wall face.
- Waterlogged hillside subgrade causing differential movement. Brisbane’s clay-rich hillside soil holds water, and when it saturates, Brussels Block and Beacon Hill pavers shift unevenly. The fix is almost always in the base: more drainage aggregate, proper compaction, and sometimes a geotextile separator. Not more sand on top.
- Wall block bulging or rotation. When drainage aggregate and weep points are undersized for the volume of water a steep Brisbane lot sheds in a storm, hydrostatic pressure builds behind the wall and the blocks start to push outward. By the time you see rotation, it’s a rebuild job. Patching the face won’t fix the pressure behind it.
- Apron washout where runoff crosses the driveway. On lots where mountain runoff crosses the driveway apron, water undercuts the paver base and carves out voids. A concrete or mortar-set apron tied to a swale outlet usually stops this pattern permanently.
Unilock Service in Brisbane: What Local Conditions Mean for Your Equipment
Here’s the part flatland Unilock pages never cover: Brisbane’s hillside grading permits draw extra geotechnical scrutiny because of landslide-prone terrain above town. When we submit plans for a Unilock retaining wall or paver driveway here, the county often wants to see engineered drainage details, compaction specs, and geogrid placement before they’ll sign off. That’s not true in South San Francisco, where a paver driveway on a flat lot is mostly a base-and-sand job. In Brisbane, every paver system is a geotechnical package.
What does that mean for a homeowner off Crocker Avenue or Mission Blue Drive? It means your Unilock service in Visitacion Valley wall or driveway needs to be designed as a water-management system first and a hardscape second. We plan for the storm that sends three inches of runoff down San Bruno Mountain in an afternoon, because the permit reviewer is going to ask how the system handles exactly that. And so will the hillside, eventually.
That’s why our estimates for Brisbane Unilock work include the base, the drainage, and where needed, the geogrid. Not just the paver count. If a bid seems too good to be true on a slope here, it usually is.
Unilock Models & Products We Service in Brisbane
We install and repair the Unilock product lines most common on Brisbane properties: Brussels Block for driveways and heavy-use areas, Beacon Hill for patios and walkways where a cleaner face reads better, Estate Wall for structural retaining walls, and Pisa2 for stepped wall sections on terraced lots. We match existing pavers and wall block by color, face profile, and format where possible.
For parts, our approach is straightforward: Unilock OEM components where they match the existing system, and proven aftermarket geogrid, drainage aggregate, and polymeric joint sand where aftermarket outperforms stock. We keep common Unilock repair materials locally accessible so a single-paver swap or a small wall cap replacement in Brisbane doesn’t turn into a two-week wait. For full Unilock sales & service, we coordinate material selection, delivery, and installation under one point of contact.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Brisbane
Brisbane hillside work carries a wider price range than flatland work, because the base, drainage, and sometimes geogrid all get more involved. Here’s what we typically see for Unilock projects in Brisbane:
| Project | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Steep grade, wall rebuilds, engineered fill, and drainage rework push a Brisbane job toward the upper end. A flat patio on a stable pad lands lower. Every free estimate includes a site walk, a look at the water flow, and a written line-item scope. Call (866) 505-5254 to schedule yours.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Brisbane
Yes, if the base is engineered for the grade. We key the base into the hillside, compact in lifts, install geogrid where the slope calls for it, and route drainage away from the paver field. A Brussels Block driveway on a steep Brisbane lot without those details will creep and settle within a few winters. Call (866) 505-5254 for an exact assessment of your driveway’s grade and drainage.
Often, yes. Because Brisbane’s hillside permits draw extra scrutiny for slope stability above town, walls over three to four feet frequently trigger a geotechnical review or an engineered design stamp. We’ll tell you early in the estimate whether your wall is likely to need one, so there are no surprises at the permit counter.
Usually. We match color, face profile, and format against the existing field, then source Unilock OEM pavers where the line is still active. Weathering can make a perfect color match tricky on older installs, so we’ll lay out options before any pavers are pulled. Your best bet is to call (866) 505-5254 and send a photo of the failed section.
We size the drainage aggregate, weep points, and outlet pipe for the volume of water the slope actually sheds in a winter storm, not the minimum the wall manual calls for. On a terraced lot off Crocker Avenue, we pulled a rotating Estate Wall, added drainage aggregate and geogrid, re-laid the pavers on a re-graded base, and tied the new outlet into a swale. No movement after two winters.
A paver driveway in Brisbane typically runs $7,000 – $18,000, and a paver patio $3,500 – $11,000, depending on grade, base depth, drainage, and whether a wall rebuild is involved. Driveway replacement runs $5,000 – $14,000. Hillside lots lean toward the higher end. Call (866) 505-5254 for a free written line-item quote.
Service Areas Near Brisbane
We run Unilock installs and repairs across the north Peninsula and into San Francisco. Beyond Brisbane service area work, we regularly serve Daly City, Colma, Broadmoor, Visitacion Valley, and Noe Valley. For Unilock work in the city, see our Unilock service in Mission District page, and for the Peninsula side, our Unilock service in South San Francisco page.
Book Your Unilock Service in Brisbane Today
If your Unilock driveway is settling, your retaining wall is leaning, or you’re planning a new paver project on a Brisbane hillside, call (866) 505-5254 for a free estimate. We’ll walk the site, look at the water flow, and give you a written line-item scope. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Brisbane and the surrounding Peninsula since day one.