Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in La Selva Beach, CA | Daly City Construction
We provide independent Jerith fence, gate, and railing service across La Selva Beach, CA, from dune-side lots off San Andreas Road to bluff-edge properties that need coastal-zone review before a single post goes in. The thing that makes our Jerith work different here is simple: we plan every fence around sand, salt air, and Santa Cruz County permitting, not just property lines. Call (866) 505-5254 for a free estimate on Jerith installation or repair in La Selva Beach.
Why La Selva Beach Residents Choose Us for Jerith Service
Jerith is a respected fencing manufacturer, and our crews have installed and repaired their ornamental aluminum and vinyl systems on dune-side and bluff-edge properties throughout south Santa Cruz County. That matters in La Selva Beach because a Jerith fence installed like an inland tract-home fence won’t hold up here. We’re an independent contractor, not an authorized Jerith dealer, which means we give you straight answers about OEM parts versus quality aftermarket hardware based on what actually works in salt air and wind-driven sand. Noel Cabrera, our owner, grew up working on fog-weathered homes and trained in construction technology before putting in years on residential and light commercial jobs across San Mateo and San Francisco counties. He takes the same direct approach to fencing: “Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.”
We know Jerith sales & service inside and out, and because we carry the full exterior and structural scope, we pair your fence with the foundation, drainage, deck, or home addition work a coastal lot often demands.
Styles & brands we work with
Common Jerith Construction Problems We Solve in La Selva Beach
- Wind-driven sand abrading powder-coat finishes. On lots open to the San Andreas Road dunes, fine sand acts like a sandblaster against Jerith aluminum pickets and rails. We see dulled, chalky finishes within a few seasons, especially below the two-foot line. We replace damaged panels and re-coat salvageable runs with marine-grade coatings that hold up to abrasive salt-laced air.
- Salt-laden marine air eating fasteners, hinges, and latch hardware. The hardware fails faster than the fence panels themselves on nearly every coastal job we touch in La Selva Beach. Galvanized hinges rust, latch springs corrode, and gates sag or seize. We swap in stainless hardware on every salt-exposed Jerith gate and railing.
- Leaning fence runs from posts set in loose dune sand. The original post footing is the cause of most leaning Jerith runs we encounter off San Andreas Road. A shallow set in sandy soil shifts with seasonal moisture and wind load. We re-set posts on engineered footings tied to the site’s erosion and setback review, then re-hang rackable panels that stay plumb.
- Fog-season moisture blistering powder coat at post-to-rail joints. Coastal fog and damp mornings in La Selva Beach trap moisture in post-to-rail joints and hollow sections. That hidden moisture promotes finish blistering and corrosion from the inside out. We seal and drain these connection points when installing, and we inspect existing Jerith runs for this specific failure before any repair quote.
- Gates that bind as dune sand shifts footings seasonally. Jerith gates on dune-side lots go out of square when footings move even slightly. A gate that swung fine in October mysteriously drags in March. We re-align hinges, set the posts properly, and re-hang rackable panels so the gate swings clean through the fog season.
Jerith Service in La Selva Beach: What Local Conditions Mean for Your Equipment
La Selva Beach is an unincorporated coastal community in south Santa Cruz County where almost all construction runs through Santa Cruz County permitting and Coastal Commission coastal-zone review, not a city building department. That means a Jerith fence or gate on a San Andreas Road dune lot has to clear coastal review and geotechnical scrutiny before we set a single post. Fence runs near the bluffs are often engineered around erosion setbacks, not just property lines. Combine that with dune-side lots where sand and wind-driven moisture constantly work against foundations and exterior finishes, and a Jerith fence here lives a harder life than the same product would five miles inland. We’ve seen powder coat strip off aluminum pickets in two seasons of sand abrasion, and we’ve seen perfectly good Jerith panels start leaning because the posts were never sized for loose dune sand. On a sand-dune lot off San Andreas Road, our crew replaced an entire leaning Jerith aluminum fence run where the original posts had been set shallow in loose sand and the gate hardware had seized from salt corrosion. We reset the posts on proper footings tied to the site’s erosion and setback review, swapped in stainless latch and hinge hardware, and re-hung rackable panels so the gate swings clean through the fog season. The owner got a fence that stands up to wind-driven sand instead of leaning into it. That’s the difference between Jerith product knowledge and Jerith product knowledge applied to La Selva Beach conditions.
Jerith Models & Products We Service in La Selva Beach
We work on the full Jerith residential lineup: ornamental aluminum fence panels in the Savannah and Regency-style picket designs, vinyl privacy and picket systems, aluminum decorative railing and gate sections, and custom rackable aluminum fence built for sloped dune-side lots. On every job we look at what the current profile still supports for genuine Jerith replacement panels, posts, caps, and hardware. When OEM parts are still the right call and available, we use them. When an OEM part lags or costs more than the repair justifies, we source quality aftermarket aluminum and stainless fasteners that hold up in salt air. If a run is leaning from footing failure or the powder coat is failing across most panels, we tell owners honestly when re-setting footings or a full replacement beats patching. Honest parts counsel comes with every service call in La Selva Beach.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in La Selva Beach
Jerith fence work in La Selva Beach is priced like most coastal construction: by the scope of the site, not just the linear foot. Dune-side access, erosion setbacks, engineered footings, and stainless hardware all shape the final number. Here’s what current ranges look like for the work most La Selva Beach homeowners ask about:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
Our free estimate includes a site walk, footing and erosion check, and a written line-item quote. No numbers waved around, no price that changes once we start digging. Call (866) 505-5254 to schedule yours, and we’ll give you a hard number based on your actual La Selva Beach lot.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re based in the La Selva Beach area and know this community well, and we also provide Jerith repair in Day Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in La Selva Beach
Yes, in most cases, but it runs through Santa Cruz County permitting and Coastal Commission coastal-zone review, not a city building department. The fence has to comply with erosion setbacks and geotechnical conditions specific to your bluff-edge lot off San Andreas Road. We handle that paperwork and coordinate the engineering review as part of the job. Call (866) 505-5254 and we’ll walk you through what your specific lot will require.
In La Selva Beach, the most common cause is salt corrosion seizing the hinges or latch hardware, or post footings that have shifted in loose dune sand. The gate pulls out of square when a footing moves even a fraction of an inch. We replace the hardware with stainless and re-set posts on proper footings, which fixes the sag for the long term.
Yes, and it’s not the fog alone. It’s the fog combined with wind-driven sand that abrades the coating, and moisture trapped in post-to-rail joints that blisters the finish from the inside out. We seal and drain these joints when we install, and we inspect existing runs for hidden moisture damage before quoting any repair.
Yes. Jerith hardware is not always stainless out of the box, so on coastal jobs we regularly source stainless hinges, latch hardware, and fasteners that hold up in the salt-laden marine air of La Selva Beach. It costs a little more up front, but it’s the difference between a gate that swings clean for a decade and one that seizes in two seasons. We’ll include the stainless option in your free estimate.
We do. The fence is often just one piece of a larger coastal project: a home addition, a deck replacement, a drainage fix, or a full rebuild. As a full-scope general contractor, Daly City Construction handles the Jerith fence and the structural and exterior work on the same property, under one point of contact. That means one schedule, one warranty conversation, and no finger-pointing if something needs attention.
Service Areas Near La Selva Beach
We serve La Selva Beach service area and the surrounding south county coast. We also run Jerith service out to Jerith service in San Martin and Jerith service in Amesti for homeowners who need coastal-grade fencing on inland lots too.
Book Your Jerith Service in La Selva Beach Today
If your Jerith fence is leaning, your gate is sticking, or you’re planning a new run on a dune-side or bluff-edge lot in La Selva Beach, call (866) 505-5254 now. We’ll bring the site-specific coastal experience and give you a straight answer and a free written estimate.
Written by Noel Cabrera, Owner at Daly City Construction, serving La Selva Beach and south Santa Cruz County.