Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Felton, CA | Daly City Construction
We provide independent Jerith fence installation, repair, and racking services across Felton’s 95018 zip code. The difference maker here is slope: steep, wooded lots change how Jerith posts, rails, and gates behave, and most of our Felton work involves correcting footings and gate alignment after wet winters. If your Jerith run is sagging, racking, or failing at the latches, call (866) 505-5254 for a free on-site assessment.
Why Felton Residents Choose Us for Jerith Service
Jerith aluminum and vinyl fencing lives or dies by how the install handles grade change. We’ve torn out enough Jerith runs in Felton to know when a post footing is too shallow, when rails were forced level instead of racked, and when the wrong fasteners are already turning to rust. Noel Cabrera, our owner, grew up watching postwar tract homes get rebuilt properly in Daly City and later trained in construction technology at City College of San Francisco. He brings the same approach to Felton: tell us what the house needs, not what you think it needs, then we’ll figure out the right fix.
We’re independent. Not authorized, sponsored, or endorsed by Jerith. We buy Jerith product directly, stand behind our own labor, and source genuine Jerith rails, pickets, post caps, and brackets when a repair needs to match the original run. You get Jerith sales & service knowledge from a contractor who actually installs in mountain terrain.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Felton
- Heaved and racked posts from shallow footings. Felton winters dump heavy rain, and hillside ground saturates fast. Posts set shallow by an original installer heave upward once the soil swells and drains, which pulls rails out of alignment and makes gates sag so latches won’t catch.
- Gate hinges and latches failing after winter. The seasonal wet-dry cycle in Felton shifts post-set slightly on slopes. Jerith gates are the first thing to show it: hinges bind, striker plates miss, and latch springs wear out from being forced.
- Powder-coat chalking and edge corrosion. Redwood litter and constant fog hold moisture against Jerith aluminum rails and pickets. The powder coat chalks, chips at cut edges and fastener points, and corrosion starts where the coating has been scratched through.
- Vinyl privacy panels cracking on exposed ridge lots. Felton ridge properties take full wind and UV. Jerith vinyl panels take the combined load at rail-and-picket tabs, and after enough freeze-thaw and wet-season flex, the tabs crack and top rails bow.
- Bottom rails pulled out of routed holes on steep runs. When an original installer racked the panels by brute force instead of re-spacing posts, the bottom rails can pull free of their routed holes on Felton’s steepest sections. We re-cut and re-rack properly.
Jerith Service in Felton: What Local Conditions Mean for Your Equipment
Felton sits in the redwood-damp Santa Cruz Mountains, and Cal Fire defensible-space rules combined with Chapter 7A ignition-resistant requirements shape where a Jerith fence can even go. A fence can’t simply run straight to the house or sit inside the required defensible zone without a plan. On a wooded lot off Graham Hill Road, our crew tore out a racked Jerith aluminum run whose posts had heaved off shallow footings after a wet winter, reset each post in a deeper concrete footing keyed past the seasonal moisture line, and re-hung the gate with stainless hinges so it swings true. We then re-cut and re-racked the panels to follow the slope instead of forcing level rails, and swapped the rusted fasteners for coated hardware. The gate stayed aligned through the following rainy season. That kind of site-specific correction is what Jerith work in Felton actually requires, and it’s why the layout has to be combed with the county before the first post goes in.
Jerith Models & Products We Service in Felton
We install and repair the full Jerith aluminum line, including the Patriot series, Provincial series, and Baron series ornamental aluminum fence. On the vinyl side, we handle Jerith privacy panel runs like Manchester and Avalon-style sections. For parts, we source genuine Jerith rails, pickets, post caps, and brackets so any replacement matches the original style and we can keep warranty traceability intact. Fasteners are upgraded to stainless or coated hardware, not the inexpensive stuff often bundled with original installs. For a 15 to 20 year old Jerith run near Lompico or in Felton, we usually repair posts, footings, and gate hardware rather than replace the whole fence, and we’ll tell you plainly when corrosion or racking has gone too far for a rebuild to make sense.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Felton
What drives cost on a Jerith job in Felton is footing depth and grade change. Steeper lots mean more concrete, more labor, and more racking cuts. Here are the ranges we work within for Felton service:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
Your free estimate includes a walk of the fence line, a look at the current footings, and a straight answer on repair versus replacement. Call (866) 505-5254 to schedule one.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and serve Ben Lomond too, and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Felton
Only if the layout keeps required clearances and uses noncombustible gate hardware, and the plan gets combed with the county before any post goes in. Felton’s Cal Fire and Chapter 7A rules mean the fence can’t simply run to the house or sit inside the defensible zone without compliant setbacks. Call (866) 505-5254 for a layout review.
Felton’s heavy winter rain saturates hillside soil, shallow post footings heave, and the gate post shifts enough to bind hinges and throw off striker alignment. The fix is resetting the gate post in a deeper concrete footing and re-hanging the gate with stainless hinges. Call (866) 505-5254 if your gate won’t catch.
A properly installed Jerith aluminum run with stainless or coated fasteners can last 15 to 20 years or more in Felton, but the powder coat will chalk faster where redwood litter and fog hold moisture against the rails. Touch-up and fastener replacement extend the run. Call (866) 505-5254 for an honest assessment.
Yes. Jerith panels are designed to rack on grade, but it requires correct post spacing and rail trimming, not forcing the panels. The steepest Felton runs often need posts re-spaced before the panels can follow the slope without pulling rails out of their routed holes. Call (866) 505-5254 for a racking estimate.
We repair what’s sound and replace what’s past saving. On a 15 to 20 year old Jerith run, that usually means repairing posts, footings, and gate hardware rather than replacing the whole fence. We use genuine Jerith parts so the repair matches the original. Call (866) 505-5254 for a repair quote.
Service Areas Near Felton
Our Jerith service covers Felton and the surrounding mountain and valley communities, including Felton service area neighbors, Jerith service in Mount Hermon, and Jerith service in Scotts Valley. We also work in Daly City, Broadmoor, Colma, Brisbane, and the Visitacion Valley and Noe Valley neighborhoods.
Book Your Jerith Service in Felton Today
If your Jerith fence is sagging, racking, or failing at the gate, don’t wait for the next rainy season to make it worse. Call (866) 505-5254 to book a free on-site estimate in Felton, and we’ll walk the line with you before you spend a dollar.
Written by Noel Cabrera, Owner at Daly City Construction, serving Felton and the Santa Cruz Mountains.