Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Ben Lomond, CA | Daly City Construction
We install, repair, and rebuild Jerith ornamental aluminum and vinyl fencing and railing across Ben Lomond, and the one thing every job here has in common is the ground it sits in. Damp redwood-belt soil, steep slopes, and decades of shortcut anchoring mean a Jerith fence in Ben Lomond lives or dies by what’s under the posts, not just the panels you can see. We’re an independent Jerith service provider, not manufacturer-affiliated or authorized, and we handle everything from a single seized gate hinge to a full permitted replacement run. Call (866) 505-5254 for an honest assessment on a fence that’s leaning, corroding, or just done fighting the fog.

Why Ben Lomond Residents Choose Us for Jerith Service
Jerith builds a solid aluminum and vinyl product, but no fence brand ships with instructions for Ben Lomond’s particular brand of abuse. Moss film on north-facing powder coat, gate hardware that seizes after one wet season, posts that rack when the slope slides a half-inch and settles your footing with it – we’ve seen all of it on lots along Highway 9 and the side roads branching off into the redwoods. That’s the difference between a contractor who’s read a Jerith catalog and one who’s reset Jerith posts on a pier-and-post foundation with three feet of drop from gate to latch post. Noel Cabrera, our owner, has spent his whole career on California’s fog-weathered hillsides, and he approaches every Jerith sales & service job in Ben Lomond the way he approaches all mountain construction: figure out what’s actually failing below the surface first, then fix it so it stays fixed. We source genuine Jerith OEM pickets, posts, and caps for anything structural or finish-matched, and we don’t waste your money replacing panels when the real problem is a footing that’s been quietly rotting for fifteen years.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Ben Lomond
- Green film and chalking on shaded north-facing panels. Ben Lomond’s redwood canopy keeps sun off long stretches of aluminum fence, and the constant humidity feeds algae and moss that bond to the powder coat. We clean, assess whether the coating itself is failing or just colonized, and restore or replace accordingly.
- Gate hinges and latches that seize or corrode. Jerith’s standard steel gate hardware does fine in dry climates, but Ben Lomond’s winter damp rusts hinges solid and locks latch mechanisms within a few seasons. We swap to quality stainless aftermarket hardware where OEM steel is the weak point – the gate still looks Jerith, it just opens in February now.
- Post shift and racking on sloped footings. When a Jerith ornamental panel run is anchored to slope-edge piers that move, the pickets bind, gaps open, and the whole line goes out of square. We reset posts into new concrete piers sized for the actual grade, not what the original installer hoped would hold.
- Rotting wood-block anchors in damp soil. This is the big one in Ben Lomond. Older installs often set Jerith posts into treated or untreated wood blocks buried under the post line. In wet mountain soil those blocks turn to sponge, the posts loosen, and a straight fence starts snaking in under two years.
- Full-run powder coat failure on old aluminum. If the coating is peeling in sheets across most of the line and the footings are shot too, repair stops making sense. We’ll tell you straight when replacement is the better spend, and we’ll scope a Jerith line that fits the property’s actual conditions.
Jerith Service in Ben Lomond: What Local Conditions Mean for Your Fence
Here’s what separates Ben Lomond from flatland Jerith work: the ground moves, the air never dries, and half the original installs were done without either fact in mind. We routinely uncover fences and railings anchored to untreated posts driven straight into the ground decades ago, so a Jerith fence job here often turns into permitted footing and rot remediation before a single new panel goes up. On a steep wooded lot off Highway 9, our crew pulled a leaning run of Jerith-style aluminum picket fence whose posts had been set into untreated wood blocks buried in damp soil, found the footings rotten and half the gate hardware seized, poured new concrete piers and reset the panels with stainless hinges and OEM caps. The homeowner got a straight, code-compliant fence line that finally drains instead of holding water against the posts. That job is the rule around here, not the exception. Santa Cruz County wildland-urban-interface fire rules also shape what we can anchor where on steep terrain, so we pull permits and build footings to spec the first time.
Jerith Models & Products We Service in Ben Lomond
We work on the full Jerith residential range you’ll find throughout Ben Lomond: Classic and Regent-style aluminum ornamental picket panels, Brookhaven and Manchester vinyl privacy and picket lines, aluminum deck and porch railing systems, and pool or estate fencing with matching gates. We also provide Lompico Jerith service for homeowners in that nearby community. For anything structural or finish-matched – pickets, posts, caps, gate frames – we source genuine Jerith OEM parts. Where Jerith’s OEM steel hardware is the corrosion weak point, like hinge pins and latch sets in Ben Lomond’s winter damp, we run quality aftermarket stainless fasteners instead. We keep the commonly replaced Jerith components stocked so a gate that won’t latch or a wind-bowed section on a Ben Lomond hillside doesn’t sit disabled while parts crawl through a distributor. If we can’t stock a specific Jerith profile, we bring it in and tell you exactly when it lands.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Ben Lomond
Jerith fence and railing work in Ben Lomond is priced by the job conditions, not a menu. Steep access, existing footing demolition, permit requirements, and whether the run needs two panels repaired or eighty feet replaced all change the number. Here’s where typical Ben Lomond projects fall:
| Service | Typical Ben Lomond Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition (fence-adjacent scope) | $45,000 – $130,000 |
A free estimate means we walk the actual fence line, check the footings, check the gate hardware, and give you a written line-item scope. No drive-by pricing. Call (866) 505-5254 and we’ll set a time to look at what’s actually happening on your Ben Lomond lot.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well, with Jerith in Brookdale also part of our regular service area. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Jerith Construction in Ben Lomond
Mostly yes. Ben Lomond’s redwood shade and wet winters create ideal conditions for algae and moss to bond to north-facing powder coat, which then can look chalky even when the coating underneath is still sound. We clean and assess whether the coating itself is failing or just dirty before recommending anything. If you’re seeing peeling or bare aluminum, that’s a different conversation. Call (866) 505-5254 and we’ll tell you which it is on your specific line.
Yes, we do it regularly. Steep-slope Jerith runs fail at the footing, not the panel, so we pull the shifted posts, pour new concrete piers sized for the actual grade and fence height, and reset the panels with proper drainage. If the slope is severe enough that standard panels won’t hold square, we’ll tell you and scope a rail-style or stepped install instead. Estimates are free – call (866) 505-5254.
Depends on the hinge post and the hardware. If the post is solid but the OEM steel hinges and latch are rusted or seized, we repair with stainless aftermarket hardware and the gate works like new. If the hinge post has rotted at the base or shifted, just swapping hardware won’t fix it – the post needs resetting first. We’ll give you a straight answer on which one yours needs.
Often yes, especially on steep or heavily vegetated lots in Santa Cruz County’s wildland-urban-interface zones. Fence height, material, and placement can all be limited by defensible-space regulations, and we pull permits and build to code as part of the scope. We’d rather get the permit right than have you rebuild a non-compliant line later. Call (866) 505-5254 and we’ll explain what applies to your specific Ben Lomond parcel.
Yes, but only if the deck’s rim joist and framing are sound enough to carry the load and the posts are anchored through to structure, not just lagged into fascia. Older Ben Lomond decks often have hidden rot in the rim or ledger, so we inspect that first and often reinforce before setting Jerith railing posts. We bring the same thoroughness to Jerith in Mount Hermon, where deck conditions are similarly demanding. The railing is only as strong as what it’s bolted to.
Service Areas Near Ben Lomond
Our Jerith fence and railing crews work throughout the Santa Cruz Mountains and up the Peninsula. Beyond Ben Lomond service area, we cover Jerith service in Bonny Doon and Jerith service in Felton, plus nearby mountain and coastal towns. If you’re anywhere along the Highway 9 corridor or the surrounding ridges, we’ll come look at your fence line.
Book Your Jerith Service in Ben Lomond Today
If a Jerith fence or railing is leaning, corroding, or just not latching, call (866) 505-5254 and we’ll set a time to walk the line. Free estimates, straight answers about repair versus replacement, and a crew that knows Ben Lomond’s soil, slope, and permit reality. Tell us what the fence is doing – we’ll figure out why it’s doing it.
Written by Noel Cabrera, Owner at Daly City Construction, serving Ben Lomond and the Santa Cruz Mountains. Noel grew up on fog-weathered hillsides and has spent his career fixing what the damp and the slope do to California homes and fences.