Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Jurupa Valley, CA | Daly City Construction
We install and service Mr-Glass frameless shower enclosures, semi-frameless bypass doors, and custom tempered glass panels throughout Jurupa Valley’s 91752 zip code as an independent construction crew, not a factory-authorized dealer. The difference here comes down to one thing: we’ve hung enough heavy frameless glass in this city’s ranch homes and semi-rural properties to know that a panel that fits perfectly today can drift out of plumb in two seasons when the ground beneath it starts moving. If you need a Mr-Glass enclosure repaired, replaced, or installed in a bathroom that’s seen decades of Jurupa Valley settling, call us at (866) 505-5254 for a free estimate.
Why Jurupa Valley Residents Choose Us for Mr-Glass Service
Most glass installers can hang a shower enclosure. Fewer understand what happens to that enclosure when the wall behind it was framed forty years ago, sits on former dairy land, and has been quietly shifting through inland Riverside heat and winter rain cycles. Noel Cabrera, our owner, grew up in Daly City’s Westlake district watching postwar tract homes get re-framed the right way, and he trained in construction technology at City College of San Francisco before putting in years of residential work across San Mateo County. That framing background matters in Jurupa Valley more than most places. We don’t just hang glass. We check the wall, the curb, the pan, and the substrate first. When clients around Mira Loma and Pedley call us for Mr-Glass service, they’re getting a construction crew that templates to what the house actually is, not what a stock kit assumes. Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Jurupa Valley
Here are the failure patterns we see repeatedly in this city, and they’re not the ones you’d hear about from a showroom salesperson.
- Hinge-side panels drifting out of plumb. Jurupa Valley’s expansive clay soil and old agricultural ground move seasonally. When the house shifts, the wall the hinge mounts to shifts with it. The door starts self-swinging, the sweep stops meeting the curb, and suddenly the enclosure leaks at the bottom corner. We re-plumb the panel, re-shim the hinge, and often install a heavier sweep that tolerates the movement.
- Roller and track wear on bypass enclosures. In Mira Loma and Pedley, wind-blown dust off flat, formerly agricultural lots beds into the tracks and grinds nylon rollers down to nothing. Doors start dragging, then binding, then jumping the track. We replace rollers with stainless or high-density composite units matched to the door weight and clean the track channel properly.
- Hard-water etching on tempered panels. Inland Riverside municipal water leaves mineral deposits on glass quickly. Within a few years, untreated Mr-Glass panels look hazy and spotted. We strip what can be stripped, then apply a glass sealant or coating so the glass sheds water and minerals more effectively going forward.
- Seal and silicone failure at the curb and wall joints. Ranch homes with original framing that has shrunk over decades open gaps between the enclosure and the wall or curb. The silicone gives way, water gets behind the track or under the curb, and the damage compounds. We clean out the old sealant, re-block where needed, and re-seal with a commercial-grade silicone that flexes with the house.
- Chipped panels at hinge cutouts. If a heavy frameless panel was installed without proper reinforcement at the hinge point, the tempered glass can chip at the cutout. Once that happens, the panel can’t be safely repaired. We replace it with matching thickness and a hinge assembly rated for the actual panel weight.
Mr-Glass Service in Jurupa Valley: What Local Conditions Mean for Your Equipment
Jurupa Valley wasn’t incorporated until 2011. Before that, this area was unincorporated Riverside County, and a lot of what got built around Mira Loma, Glen Avon, and Pedley happened under county jurisdiction with far less scrutiny than a city inspector would apply today. That means we regularly walk into homes where the bathroom we’re about to hang glass in was never permitted, or where the wall we’re drilling into is itself an addition that was never signed off. Before we template a Mr-Glass enclosure, we confirm what’s behind the tile – is that wall load-bearing, is the stud spacing right for a heavy frameless panel, is the curb actually level? Because if we mount a 120-pound glass panel to a wall that wasn’t framed for it, the panel becomes a hazard the first time the ground shifts. On a ranch property off a Mira Loma lane on former dairy ground, our crew found an inherited bathroom that had been converted into a roll-in shower with no permit record, and the framing had moved enough that the opening was nearly an inch out of square. We verified the wall and curb, reworked the pan, blocked the studs to true, and templated a custom Mr-Glass frameless enclosure instead of forcing a stock kit. The door finally latched clean, and the homeowner had documentation of what was actually behind the tile for the first time.
Mr-Glass Models & Products We Service in Jurupa Valley
We work on the full Mr-Glass range you’re likely to find in Jurupa Valley homes: frameless hinged and fixed-panel shower enclosures, semi-frameless bypass and sliding shower doors, tub-to-shower conversion kits with custom-cut tempered panels, and frameless glass panels used for closet and interior partition glazing. When hardware fails, we source Mr-Glass hinge and pivot components through quality aftermarket suppliers when OEM parts are on long lead or where a sturdier stainless replacement makes structural sense. But we don’t swap blindly. We match glass thickness, hinge rating, and pivot reach to the actual panel weight. If the glass is sound and only the hardware or seals have failed, we repair. If the panel has lost its temper, chipped at a hinge cutout, or the opening has moved beyond what a re-shim can fix, we replace. For full-service Mr-Glass work in Jurupa Valley, our Mr-Glass sales & service page walks through our broader brand coverage.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Jurupa Valley
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel (full, glass included) | $9,000 – $28,000 |
The biggest pricing variable in Jurupa Valley is what we find when we open the wall. A simple tub-to-shower conversion in a home with solid framing and a level curb stays at the lower end. A frameless enclosure in a bathroom that’s been settling for forty years and needs re-blocking, pan work, and custom templating lands higher. Every estimate is free and line-itemed, so you’ll see exactly where your money goes before you agree to anything. Call (866) 505-5254 and we’ll schedule it.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re a General Contractor in Jurupa Valley and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Mr-Glass Construction in Jurupa Valley
My Mira Loma bathroom was added onto the house years ago and I’m not sure it was ever permitted – can you still install a Mr-Glass shower enclosure?
Yes, you can still get a Mr-Glass enclosure, and we’ve done this many times in Mira Loma, Glen Avon, and Pedley. The permitting question doesn’t stop the install unless the structure itself is unsafe. What it means is that before we hang glass, we verify what’s behind the walls – stud spacing, blocking, waterproofer, curb condition. If the framing needs correction, we correct it first. You end up with a properly mounted enclosure and documentation of what we found. Call (866) 505-5254 and we’ll walk through your specific situation.
Why does my frameless Mr-Glass shower door keep swinging open on its own?
A frameless shower door that self-swings is almost always telling you the hinge side is out of plumb. In Jurupa Valley, that typically traces back to soil movement under the slab or framing that’s settled over decades of inland heat. The fix is re-shimming the hinge panel back to true vertical, not tightening the hinge screws harder. If the movement is significant, we may need to re-block the stud behind the hinge mount. Call us at (866) 505-5254 and we’ll diagnose it on site.
My glass shower enclosure looks hazy and spotted – is the water doing that?
Yes, it’s mineral buildup from inland Riverside municipal water. The water here carries enough dissolved minerals that tempered glass without a coating or regular sealing will etch within a few years. We strip the buildup where possible, then apply a sealant that slows re-deposit and makes the glass easier to clean. If the etching is too deep, replacement is the only way to get truly clear glass again. Call (866) 505-5254 for a free assessment.
Can you convert my old tub to a walk-in shower in a Glen Avon ranch home with a 5-foot alcove?
Yes, and a 5-foot alcove is actually a standard tub footprint, which makes the conversion straightforward. We pull the tub, rework the drain and pan, re-waterproof, then template a Mr-Glass panel system to fit. In older Glen Avon ranch homes, the wild card is what we find when the old tub skirt comes off – sometimes the framing behind it has been compromised by years of sub-floor moisture. We deal with that before any glass goes in. Estimates are free: (866) 505-5254.
Do Santa Ana winds and summer heat actually damage shower glass and hardware in Jurupa Valley?
Santa Ana winds themselves don’t typically damage interior shower glass, but the dust they carry does grind down rollers and tracks on bypass enclosures, especially on flat, formerly agricultural lots. The summer heat contributes through expansion and contraction cycles on framing and sealant. Over time, that movement breaks silicone bonds and shifts panels. It’s a slow process, but it’s real, and it’s part of why we check seals and hardware every time we’re in a Jurupa Valley home.
Service Areas Near Jurupa Valley
We run Mr-Glass service through Jurupa Valley’s 91752 corridor and into neighboring communities. If you’re in Glen Avon with a ranch home bathroom that’s ready for a frameless enclosure, our Mr-Glass service in Glen Avon page breaks down what to expect. We also cover nearby areas like Mira Loma and Pedley, and for properties further out, see our Mr-Glass service in North Tustin page. Our full coverage is mapped on the Jurupa Valley service area page.
Book Your Mr-Glass Service in Jurupa Valley Today
If your Mr-Glass enclosure is leaking, drifting, hazy, or just not built the way it should have been, we’ll fix it right. Call (866) 505-5254 to schedule your free estimate in Jurupa Valley. We’ll show up, look at what’s actually behind the glass, and give you a line-itemed quote you can plan around.
Written by Noel Cabrera, Owner at Daly City Construction, serving Jurupa Valley with Pedley Mr-Glass service and the surrounding Inland Empire communities.