Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Temecula, CA | Daly City Construction
We provide independent Mr-Glass shower enclosure and architectural glass service across Temecula, CA. What makes our work here different is straightforward: we’ve spent years installing and repairing Mr-Glass frameless enclosures inside Temecula’s HOA-governed tracts, so we design and document every job to pass architectural review the first time, not after a stall at the finish-approval stage. Daly City Construction is led by Noel Cabrera. Call (866) 505-5254 for a free estimate on Mr-Glass repair, replacement, or tub-to-shower conversion in Temecula.
Why Temecula Residents Choose Us for Mr-Glass Service
Most Mr-Glass enclosures in Temecula fail for the same handful of reasons: hard-water scale building up in pivot hardware, sweeps drying out under west-facing sun, and out-of-square openings in 1990s – 2000s tract bathrooms that create uneven glass gaps. We already know these failure patterns because we work inside Redhawk, Harveston, Morgan Hill, and the custom-home pockets off De Portola Road regularly. Noel Cabrera started in construction technology at City College of San Francisco and spent years on residential jobs before leading Daly City Construction, so when a Mr-Glass door hangs stiff or stops latching, we trace the cause instead of guessing. We stock OEM Mr-Glass hinges, pivots, and sweeps where the original profile is still manufactured, and we carry quality stainless aftermarket hardware when a line has been discontinued. We’re also local to the Temecula service area, which means we know what architectural review boards in each tract actually flag on glass changes. One contractor, every phase. That includes the paper. Call (866) 505-5254.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Temecula
Here are the failures we see most often in Temecula, tied directly to local conditions.
- Stiff or sagging pivots from hard-water scale. Temecula’s inland water carries enough mineral content that Mr-Glass pivot and hinge bushings accumulate scale fast. The door starts swinging stiff, then sags at the pivot until it won’t latch. We replace pivot hardware with OEM or stainless aftermarket parts and reset the door clearance. No full re-order needed when the glass is sound.
- Dried-out sweeps and bottom seals. West-facing bathroom glass in Temecula takes hours of intense inland sun. Mr-Glass bottom sweeps and seals shrink, crack, and let water escape the curb onto surrounding tile. We remove the old sweep, source the correct profile, and re-seat the bottom seal with proper compression.
- Uneven gaps from out-of-square openings. The 1990s – 2000s tract bathrooms across Temecula’s master-planned neighborhoods were framed quickly. When a Mr-Glass frameless panel goes into an opening that has crept out of square, the gap between door and fixed panel looks wrong and leaks. We re-template and shim as needed rather than forcing the enclosure into a bad fit.
- Loose wall anchors and clamps. Stucco-and-wood-frame exterior walls in Temecula expand and contract with seasonal thermal swings. Mr-Glass wall anchors and clamps work loose over time, the enclosure racks, and the door stops closing cleanly. We re-anchor with proper fasteners rated for the substrate.
- Chipped or out-of-temper panels. Santa Ana winds in Temecula can send debris against bathroom glass or stress panels that were already comproached. If the panel shows edge chipping, we inspect for temper loss immediately. A compromised tempered panel can’t be repaired safely. We re-template and replace.
Mr-Glass Service in Temecula: What Local Conditions Mean for Your Equipment
Temecula’s HOA architectural review boards, not the city building department, are the real gate on exterior glass changes and visible enclosure work. In tracts like Redhawk, Harveston, and Morgan Hill, a visible patio-door or window glazing change can stall on the association’s approved-palette and finish rules long before a permit is ever pulled. For Mr-Glass owners, this shapes how we scope every job. An interior shower enclosure rarely triggers review, but if the project touches an exterior window or patio door, the finish and frame color need to match association standards. We document the proposed finish so the submittal sails through. The same HOA layer applies to additions and patio covers, which most cities don’t have. In a Redhawk tract off Camino del Vino, our crew was called for a Mr-Glass frameless enclosure whose door had stopped closing squarely after a bathroom refresh. The opening had crept out of plumb and the original pivot hardware was scaled and stiff from Temecula’s hard water, so we re-templated the fixed panel, upgraded to stainless pivots and a new sweep, and reset the door with even clearance. No full re-order needed. We also documented the finish so the owner’s next exterior glass change would pass architectural review without a second submittal. That’s Temecula-specific work.
Mr-Glass Models & Products We Service in Temecula
We service and install the main Mr-Glass lines: frameless bi-fold shower door enclosures, semi-frameless sliding shower door kits, Neo-angle corner shower enclosures, and custom-cut tempered panels and fixed glass panels. Our parts approach is simple. We use OEM Mr-Glass hinges, pivots, and sweeps when the original profile is still available. When a line is discontinued, we source quality aftermarket stainless hardware. We won’t downgrade to cheap zinc fittings that pit in a single Temecula summer. For fast turnaround, we stock common pivot bushings, sweeps, and stainless clamps locally so we don’t wait on a parts order for basic repairs. If the glass itself is sound and only the hardware or seals have failed, we repair. If panels are chipped, out of temper, or the opening has moved, we re-template and replace. Built to last, not built to list.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Temecula
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes a look at the opening, the existing hardware, and whether the enclosure needs repair or replacement. We won’t push a full re-order when a pivot and sweep fix the problem. Call (866) 505-5254 for an exact quote. Estimates are free.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Mr-Glass Construction in Temecula
Do I need HOA approval before replacing a shower enclosure or visible glass in Temecula?
No, interior shower enclosures don’t typically require HOA approval. But if the project touches exterior glazing, like a patio door or visible window glass, yes, your association’s architectural review board may need to sign off on the finish and palette. We document the proposed finish so the submittal matches what the board expects. Call (866) 505-5254 and we’ll tell you what your specific tract requires.
Why does my Mr-Glass shower door swing stiff or stop latching here?
Temecula’s hard inland water leaves mineral scale in the pivot and hinge bushings, which makes the door swing stiff and eventually sag until it stops latching. We clean or replace the pivot hardware, reset the door clearance, and replace the sweep if it has dried out. Call (866) 505-5254 for a repair estimate.
Can you convert a tub to a walk-in shower with a frameless Mr-Glass enclosure?
Yes. We do tub-to-shower conversions with Mr-Glass frameless or semi-frameless enclosures in Temecula regularly. The existing tub comes out, the shower pan goes in, waterproofing is installed to current code, and the Mr-Glass enclosure is templated to the new opening. Call (866) 505-5254 to schedule a free estimate.
Is repair cheaper than replacing my Mr-Glass enclosure?
Usually. If the glass panels are sound and only the pivots, hinges, or sweeps have failed, repair runs a fraction of full replacement. We only replace when panels are chipped, out of temper, or the opening has moved beyond what re-templating can fix. Call (866) 505-5254 for an honest repair-versus-replace quote.
Will intense Temecula sun and Santa Ana winds affect my shower enclosure over time?
Yes. Direct afternoon sun through west-facing bathroom glass dries out sweeps and bottom seals, and Santa Ana winds can carry debris against panels or stress compromised edges. We recommend checking sweeps annually and replacing them before they crack. Call (866) 505-5254 if you’re seeing water at the curb or a door that won’t close cleanly.
Service Areas Near Temecula
We serve Temecula and nearby communities including Mr-Glass service in Fallbrook, Mr-Glass service in Yucca Valley, plus Murrieta, Wildomar, and Menifee. If you’re in a neighboring Riverside County city with a Mr-Glass enclosure that needs repair or replacement, call (866) 505-5254.
Book Your Mr-Glass Service in Temecula Today
Tell us what the house needs, not what you think it needs, and we’ll figure out the right fix. Call (866) 505-5254 to schedule your free Mr-Glass estimate in Temecula. Same-day service is available for straightforward repair calls when we have a crew in your area. Ask about Mr-Glass sales & service, our full Temecula service area, or schedule directly by phone.
Written by Noel Cabrera, Owner at Daly City Construction, serving Temecula and surrounding Riverside County communities.