Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Murrieta Hot Springs, CA | Daly City Construction
We install and service Mr-Glass shower enclosures, mirrors, and glass surfacing across Murrieta Hot Springs as an independent glass-and-construction crew. The thing that makes our Mr-Glass work here different from anywhere else in the valley is simple: this town sits over active geothermal ground, and that changes how glass enclosures get templated, set, and sealed. If you’re pricing a frameless shower or tub-to-shower conversion in the 92563 ZIP, call (866) 505-5254 for a free estimate.
Why Murrieta Hot Springs Residents Choose Us for Mr-Glass Service
Noel Cabrera, our owner, grew up watching his uncle re-frame a garage in Daly City and decided then that the work he wanted to do had to be done with his hands, not just sketched on a plan. That’s the standard we bring to every Mr-Glass enclosure we hang in Murrieta Hot Springs. We’re not a glass shop that subcontracts the framing. We’re a full general contractor that handles the framing, the waterproofing, the tile substrate, and the glass as one continuous job, so the enclosure actually fits the opening it’s going into.
We’re an independent provider of Mr-Glass sales & service, not a manufacturer affiliate. That independence matters here because Murrieta Hot Springs has the kind of ground and water conditions that make off-the-shelf templates fail. We carry OEM-compatible Mr-Glass hardware and seals, and we pair them with aftermarket rollers and hinges where the stock parts are the weak point. That’s the honest repair-versus-replace call a homeowner needs, not a catalog pitch.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Murrieta Hot Springs
- Mineral etching and clouding on glass. Lots near the historic springs and along the Temecula Creek drainage often pull mineral-laden groundwater into showers, especially where private wells are still in use. That water pits glass faster than treated municipal supply and leaves panels looking fogged within a season or two.
- Frameless hinged doors drifting out of alignment. Santa Ana wind seasons and the dry inland heat here move walls and slabs more than people expect. A frameless Mr-Glass hinged door that was hung plumb in March can drag at the sweep or swing open on its own by September.
- Wall clamps and hinges working loose. Older resort-era structures and custom homes around the springs were framed to no consistent standard. When the opening was never plumb, the clamps can’t hold long-term, and the whole enclosure starts shifting.
- Hard-water spotting killing seals and rollers. The mineral load in the water near the Temecula Creek drainage is aggressive. Rollers and seals wear out noticeably faster than they do on treated city water elsewhere in the valley.
- Stock-size panels leaving gaps at the sweep. Custom remodels on oversized parcels rarely produce perfectly square openings. A standard Mr-Glass panel won’t close that gap, and the leak at the bottom becomes a constant fight.
Mr-Glass Service in Murrieta Hot Springs: What Local Conditions Mean for Your Equipment
Murrieta Hot Springs is a small, unincorporated hot-springs community on the I-15 corridor just north of Murrieta proper, and it sits over an active geothermal area. Construction here regularly means working around hot-water and mineral-laden soils, existing resort and well infrastructure, and lots bisected by the Temecula Creek drainage rather than the cookie-cutter tract building happening elsewhere in the valley. On lots near the historic springs and along the creek, we regularly hit hot water or saturated mineral-rich ground during excavation. That can shift a bathroom addition’s footing and slab elevations mid-dig and change how a shower pan and glass enclosure have to be set. A homeowner pricing a stock Mr-Glass kit online has no way to account for that. Our crews template after the opening has settled, not before, and that’s the difference between a door that swings clean and one that binds in six months.
Mr-Glass Models & Products We Service in Murrieta Hot Springs
We service the full residential Mr-Glass line that shows up in Murrieta Hot Springs homes: frameless hinged shower enclosures, semi-frameless sliding shower doors, custom-cut mirrors and vanity glass, and neo-angle frameless enclosures. We keep the common Mr-Glass hinges, clamps, sweeps, and rollers on hand so we can turn most repairs around without waiting on a parts shipment. When a panel has to be custom-cut, we template on site and order to the actual opening, not a stock size. For openings that have moved or were never square, that’s the only approach that works.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Murrieta Hot Springs
What you’ll pay depends on whether we’re replacing a panel, converting a tub, or building the whole shower from the pan up. Here’s where typical Murrieta Hot Springs jobs land:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free and itemized in writing. We don’t fold surprises into the final number, and we’ll tell you before we start if the geothermal ground or the framing condition is going to change the scope. Call (866) 505-5254 to schedule yours.
Serving Murrieta Hot Springs, CA — Our Local Coverage Area
We’re based in the Murrieta Hot Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Murrieta Hot Springs
Yes. Warm mineral-rich groundwater near the hot-springs corridor can shift slab elevations and moisture levels during excavation, which changes how the shower pan gets flashed and how the glass enclosure has to be templated. We’ve seen openings settle after rough-in, and a stock kit won’t hang plumb on a slab that’s moved. We dewater, re-flash, and template to the settled opening instead. Call (866) 505-5254 if you’re planning a bathroom on a lot near the springs, and we’ll walk you through what to expect.
In Murrieta Hot Springs, the usual cause is seasonal wall and slab movement from the dry heat and Santa Ana wind cycles. The hinges stay tight while the opening itself shifts a fraction of an inch. We re-hang the panel to the current opening and set the hinges with clearance that tolerates the seasonal movement. It’s a fix that outlasts a simple hinge tightening. Call (866) 505-5254 for an exact quote; estimates are free.
Yes, faster than municipal water elsewhere in the valley. The mineral load near the creek corridor pits and clouds glass, and it also shortens the life of rollers and seals. We recommend a glass protectant and more frequent squeegee use, but the structural fix is to tighten drainage and slope so mineral-laden water doesn’t stand against the frame. If your panels are already etched, replacement is usually the smarter money than polishing. Call (866) 505-5254 for a straight answer on what your specific panels need.
Yes. Most of our tub-to-shower conversions in the 92563 ZIP happen on larger custom parcels where the bathroom was built years ago, often to no consistent framing standard. We re-plumb the drain, re-flash the pan, square the opening, and then template the Mr-Glass enclosure to the actual dimensions. Out-of-square openings are normal here, so we plan for them from the start. Call (866) 505-5254 to schedule a free estimate.
No. We’re an independent contractor providing Mr-Glass sales & service, which means we can pair genuine Mr-Glass hardware with aftermarket parts where the stock components are the weak link. We’re not bound by any manufacturer restriction on how we repair your enclosure, and we’ll tell you plainly when a re-seal and re-hang is the better money versus a full replacement.
Service Areas Near Murrieta Hot Springs
We serve the full Murrieta Hot Springs service area and the surrounding communities, including Murrieta proper, Temecula, French Valley, Winchester, and Wildomar. If you’re just outside the 92563 ZIP, call and we’ll confirm coverage. We also run crews for Mr-Glass service in Morongo Valley and Mr-Glass service in Valle Vista when the projects take us east or north of the corridor.
Book Your Mr-Glass Service in Murrieta Hot Springs Today
If your Mr-Glass shower is fogged, drifting, leaking, or was never hung right to begin with, call (866) 505-5254. We’ll send someone out to look at the actual opening, give you a written estimate, and tell you honestly what the house needs. Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.
Written by Noel Cabrera, Owner at Daly City Construction, serving Murrieta Hot Springs and the surrounding valley.