Mr-Glass Construction in Tiburon, CA

Mr-Glass Construction in Tiburon, CA | Daly City Construction

We provide independent Mr-Glass service throughout Tiburon, from frameless enclosure repairs up on the hillside lanes to full bathroom remodels with custom glass. The difference here is simple: most shower-glass crews don’t understand what a 1970s hillside bath does to a Mr-Glass frame over twenty wet winters and twenty dry summers. We do. Call (866) 505-5254 to schedule a free estimate.

Why Tiburon Residents Choose Us for Mr-Glass Service

Noel Cabrera leads our Mr-Glass work from a background that fits this town. He grew up in Daly City’s Westlake district watching postwar tract homes get re-framed, trained in construction technology at City College of San Francisco, and has spent years on the fog-weathered houses that need real structural attention before any glass gets set. When a Mr-Glass enclosure in Tiburon fails, the glass is usually the last thing wrong with it. The wall behind it moved. The curb rotted. The hinge carried weight it was never designed to hold.

We’re an independent contractor, not authorized, sponsored, or endorsed by Mr-Glass. That independence matters because we spec parts and glass to what the house actually needs, not to what a dealer has on the shelf. If the OEM hinge is still available, we use it. If it’s been discontinued, we step to quality aftermarket stainless hardware and tell you why. Straight answers, no showroom script.

Common Mr-Glass Construction Problems We Solve in Tiburon

Here’s what we see repeatedly on Mr-Glass enclosures across Tiburon:

• Sagging frameless doors that chip tile at the strike jamb. Hinge and pivot hardware loosens after years of daily use. On a hillside bath where the floor has settled even an eighth of an inch, that sag compounds fast. We re-shim, re-plumb the wall if needed, and reset the door so it seals without chewing the tile line.
• U-channel and bottom sweeps that dry out and shrink. Tiburon’s long, dry summers bake the seals, then winter rain wicks under the curb into framing. Homeowners see water at the subfloor, not at the glass, and assume the panel failed. Usually it’s a $40 sweep that went brittle three years ago.
• Factory sealant failing against out-of-plumb walls. Homes built into Tiburon slopes in the 1960s through 1980s have bathroom walls that were never perfect, and forty years of settling hasn’t helped. When a Mr-Glass panel was gasketed against that wall, the gap eventually opens and leaks show up as rot beneath the shower pan.
• Tempered panels cracking at hinge cutouts. We’ve pulled panels where the original installer shimmed the enclosure to a floor that later settled. The door weight now sits unevenly on one hinge, and the stress cracks the glass at the cutout. That’s a replacement call, not a patch job.
• Curb leaks after wet winters. Tiburon gets heavy winter rain on steep terrain. A Mr-Glass enclosure with failed sealant lets spray find the curb, and once the curb membrane is compromised, the water travels. Re-flashing and rebuilding the curb fixes the leak at its source.

Mr-Glass Service in Tiburon: What Local Conditions Mean for Your Equipment

On the hillside lanes above downtown Tiburon, many bathroom walls were never re-plumbed after the original 1960s-to-1980s deck and foundation work. A Mr-Glass enclosure templated to the current opening can arrive out of square enough that custom glass, not a stock panel, is the only thing that closes cleanly. Add the Town of Tiburon’s design review preference for replacement-in-kind details, and the glass spec often has to match what is already in the opening before the schedule can even be set. That’s not true in Corte Madera or Mill Valley the same way it is here. Tiburon’s hillside review process shapes what gets ordered, what gets approved, and when the install crew can actually show up.

Noel puts it plainly: “Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix.”

Mr-Glass Models & Products We Service in Tiburon

We install and service the full Mr-Glass residential line: frameless hinged shower door enclosures, neo-angle corner shower enclosures, semi-frameless sliding bypass shower doors, and custom glass panel and return-screen systems. For parts, we match the original Mr-Glass hardware profile with OEM hinges, pivots, and sweeps where they’re still available. When an OEM part is discontinued, we move to aftermarket stainless hardware rated for wet environments, not whatever generic hinge is on the shelf. We keep common Mr-Glass hinge profiles and sweep sizes on hand for fast Tiburon turnaround, plus we template on-site so custom panels fit the actual opening, not a wish.

See our broader Mr-Glass sales & service page for what we cover across the Bay Area.

Mr-Glass Service Pricing in Tiburon

FAQs – Mr-Glass Construction in Tiburon

Can a Mr-Glass enclosure be templated to a Tiburon hillside bathroom wall that is out of plumb?

Yes, that’s actually the standard condition we work with here. The enclosure gets templated to the wall as it actually sits, with custom glass cut to a template taken after we’ve corrected the wall or built out the opening. A stock panel won’t close cleanly on a wall that’s moved an inch over forty years. If your wall is badly off, we may recommend re-plumbing the studs before any glass is ordered. Call (866) 505-5254 and we’ll tell you what your wall actually needs.

My Mr-Glass shower door drags and the sweep is torn – repair or replace?

If the glass is sound and the issue is worn hinges, a dry sweep, or loose wall anchors, repair is the honest call. We replace the sweep, tighten or swap the hardware, and reset the door. If the panel is chipped at a hinge cutout or stress-cracked from years of settling, replacement makes more sense than a patch that fails in six months. We’ll show you the difference before any money changes hands.

How does Tiburon’s design review affect replacing a Mr-Glass shower enclosure?

The Town’s design review often requires replacement-in-kind details, which means the new glass spec has to match what’s already in the opening – panel size, hinge style, sometimes even the hardware finish. That can add a week or two to the schedule while plans get approved. We handle that paperwork so you don’t have to mediate between the planning desk and the glass fabricator.

Why do Mr-Glass enclosures leak at the curb after a wet Tiburon winter?

Because seals and grout fail slowly over a long dry summer, then the first heavy winter rain exploits every gap. Water wicks under the curb, saturates the framing, and rots the subfloor before you ever see it at the glass. If your curb shows water staining or the tile is popping, the fix is re-flashing and rebuilding the curb, not adding more caulk. Call (866) 505-5254 and we’ll inspect it before the next storm.

Do you use Mr-Glass OEM parts or aftermarket hardware on repairs?

We match the original Mr-Glass hardware profile with OEM hinges, pivots, and sweeps where they’re still available. When Mr-Glass has discontinued the part, we move to quality aftermarket stainless hardware rated for wet environments. We tell you which one applies to your repair and why, before the work is done.

Service Areas Near Tiburon

We serve Tiburon at 94920 and the surrounding communities. Our crews regularly work across Marin on hillside homes with the same construction-era issues. If you’re searching in nearby spots, see our Tiburon service area page for full coverage details. We also handle Mr-Glass work in Mr-Glass service in Montara down the coast and Mr-Glass service in San Mateo across the bay.

Book Your Mr-Glass Service in Tiburon Today

If your Mr-Glass shower door sags, leaks, or chips tile every time it closes, call (866) 505-5254 for a free estimate. We’ll inspect the glass, the hardware, and the wall behind it, then give you a line-itemed quote on the spot.

Written by Noel Cabrera, Owner at Daly City Construction, serving Tiburon and the Bay Area since he first picked up a hammer in his uncle’s garage in Daly City.