Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Bruno, CA | Daly City Construction
We install and service Mr-Glass products throughout San Bruno, CA, from frameless shower enclosures to mirror walls and storefront glazing. We’re an independent construction crew, not a Mr-Glass dealer or authorized service center, which means we answer to you, not a manufacturer’s warranty department. The thing that makes our Mr-Glass work different in San Bruno is simple: we template and install glass for houses that sit in the fog belt and lean on 1940s-to-1960s framing, so we account for out-of-plumb walls and marine damp before the first panel gets cut. Call (866) 505-5254 for a free estimate on any Mr-Glass job in San Bruno.
Why San Bruno Residents Choose Us for Mr-Glass Service
Mr-Glass hardware and glass have their own quirks, and we’ve learned them the way you learn anything worth knowing: by installing and fixing them every week across San Bruno’s flats and hillsides. Noel Cabrera, our owner, grew up in Daly City’s Westlake district and trained in construction technology at City College of San Francisco before spending years on residential and light commercial jobs across San Mateo County. When he walks into a San Bruno bathroom with a sagging Mr-Glass barn-door slider, he’s looking at the threshold, the wall framing, and the vent fan before he touches the rollers. That’s the difference. We stock OEM Mr-Glass hinges, rollers, handles, and channel sweep locally, and we keep quality aftermarket seals and silicone on the truck for the fog-belt conditions that eat cheap caulk alive. You get one crew, one call, and glass that actually fits the house you live in. See our Mr-Glass sales & service page for the full scope of what we handle.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Bruno
- Fog-belt clouding on frameless shower glass. San Bruno’s west side catches marine air through the Gap nearly every morning. When a bathroom never fully dries between uses, mineral spotting and condensation haze build on Mr-Glass panels fast. We deep-clean, reseal, and where the glass is past saving, replace the panel and upgrade the bath venting so the new glass stays clear longer.
- Sagging barn-door sliders on hillside bathrooms. Stepped hillside homes in San Bruno often have thresholds that settle a quarter-inch out of level over the years. That throws Mr-Glass roller tracks off, and the door starts dragging or jumping. We re-shim the wall-side channel, replace worn OEM rollers, and re-hang the door so it glides instead of grinding.
- Weep leaks at pivot hinges. Pivot-hinge enclosures on out-of-plumb walls develop gaps at the sweep, and wind-driven mist from the fog season works its way onto the floor. We re-templated the opening, re-set the hinge, and re-swept the bottom edge so the seal actually seals.
- Seal failure on older sliders and single panes. Silicon shrinkage along channel edges lets fog-belt damp track inside during summer mornings. We strip the old silicone, clean the channel, and re-bed with a sealant rated for persistent moisture, not the cheap stuff that fails in eighteen months.
- Mirror desilvering in older tract homes. A lot of 1950s San Bruno ranchers still have original bath venting, which is undersized by today’s standards. Humidity sits high, and the bottom edge of a Mr-Glass mirror wall starts to blacken. We replace the affected panels and, where you want it, upgrade the fan so the next mirror doesn’t rot from the bottom up.
Mr-Glass Service in San Bruno: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic glass page. San Bruno’s Crestmoor neighborhood was rebuilt after the 2010 PG&E pipeline explosion, and that means a glass job there often happens in a newer wall assembly sitting directly next to an untouched 1950s tract home. Two houses on the same street, built sixty years apart, with two completely different plumb-and-square realities. We measure every opening as if it’s wrong, because on about half of San Bruno’s older stock, it is. Over in Crestmoor Canyon we replaced a barn-door frameless Mr-Glass service in Millbrae enclosure in a post-explosion rebuild home where the new curb was dead level but the adjoining hall wall was out of plumb, so the pivot sagged and water tracked over the sill. We re-templated to the actual opening, shimmed the wall-side channel, dropped in OEM rollers and hinges, and re-swept with fresh silicone. The door now closes with a clean seal even on foggy mornings. That’s the kind of thing that separates a crew that works San Bruno every week from one that just cuts glass to the numbers on a spec sheet.
Mr-Glass Models & Products We Service in San Bruno
We work on the full Mr-Glass in South San Francisco frameless shower enclosure series, including barn-door slider, pivot, and hinged configurations. We also handle Mr-Glass sliding glass door units for closet and room-divider openings, custom-cut mirror walls and vanity mirror sets, and Mr-Glass storefront and aluminum window glazing for garage conversions and light-commercial work. On hardware, we source Mr-Glass OEM hinges, rollers, handles, and channel sweep so glass and hardware stay matched. Where aftermarket seals and silicone perform as well or better than OEM, we use them and pass the savings along. The honest call on glass: we’ll repair hardware and reseal a sound panel every time, but once a panel is chipped at a hinge bore or desilvered past the edge, replacement is the only way to do it right. We keep common Mr-Glass parts and sealants stocked locally for fast San Bruno turnaround.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Bruno
Here are the price ranges we work with on Mr-Glass service in Brisbane and San Bruno jobs, based on the work we’ve done across the city’s fog-belt flats and hillside lots. Every job gets a written line-item quote before we start, so there’s no mystery math at the end.
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Glass shower door hardware repair/reseal | $400 – $1,800 |
What drives the price in San Bruno? Whether the opening is plumb (Crestmoor rebuilds often are; 1950s ranchers often aren’t), whether we’re replacing a panel or the whole enclosure, and whether your bath venting needs an upgrade so the new glass doesn’t cloud in two years. As Noel says: “Tell me what the house needs, not what you think it needs – then we’ll figure out the right fix.” Call (866) 505-5254 for an exact quote. Estimates are free.
Serving San Bruno, CA — Our Local Coverage Area
We’re a General Contractor in San Bruno and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Bruno
San Bruno sits in the coastal fog belt, so marine damp pushes through the Gap most mornings and keeps bathroom glass wet longer than it would in a drier climate. That persistent moisture leaves mineral deposits and condensation haze on Mr-Glass panels, especially in bathrooms with original undersized venting. We clean and reseal the glass where it’s sound, and where the clouding has etched the surface, we replace the panel and usually recommend a vent-fan upgrade so the new glass doesn’t go the same way. Call (866) 505-5254 and we’ll tell you which camp your glass falls into.
Usually it’s a bit of both. Rebuild homes in Crestmoor were framed to modern tolerances, but adjoining walls can still settle, and the threshold often isn’t perfectly level with the wall channel. That throws Mr-Glass rollers off and the door starts popping out of the track. We check the opening before we blame the hardware, then shim the wall-side channel and replace the OEM rollers if they’re worn. Call (866) 505-5254 to schedule a look.
Yes, and this is a common one on San Bruno’s west-side hillsides. Wind-driven mist from the Gap finds any gap in a channel seal, and old silicone that’s shrunk or cracked will let water track inside. We strip the channel, clean it properly, and re-bed with a moisture-rated sealant, then re-sweep the bottom edge so the door drains the way it should. Call (866) 505-5254 for a free estimate on a reseal.
We do, and we see the same failure pattern across San Bruno’s 1940s and 1950s ranchers: undersized bath fans leave humidity sitting high, and the bottom edge of a Mr-Glass mirror wall starts to desilver. We replace the affected panels, and if the venting is original, we’ll quote an upgrade at the same time so the next mirror lasts decades instead of a few years. Call (866) 505-5254 to talk through your specific bathroom.
We install and service the full Mr-Glass range: frameless shower enclosures, sliding glass doors, mirror walls, and storefront or aluminum window glazing for garage conversions and light-commercial work in San Bruno. Same crew, same OEM parts approach, same free estimates. Call (866) 505-5254 and tell us what you’re working with.
Service Areas Near San Bruno
We cover all of San Bruno, 94066, and the surrounding area. If you’re in Daly City, Broadmoor, Colma, Brisbane, or over the hill in Visitacion Valley, we’re already working nearby. See our San Bruno service area page for full coverage details, or check our Mr-Glass service in Pacifica and Mr-Glass service in Chinatown pages if you’re on the coast or in the city.
Book Your Mr-Glass Service in San Bruno Today
If your Mr-Glass shower, slider, mirror, or storefront glass needs work in San Bruno, call (866) 505-5254. We’ll schedule a free estimate, measure the actual opening, and give you a written line-item quote. We’re an independent crew, not a Mr-Glass warranty line, so you’ll talk to the people who do the work.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Bruno and the surrounding peninsula.