Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Juan Bautista, CA | Daly City Construction
We provide independent Mr-Glass in Aromas and San Juan Bautista shower and glass enclosure service, and the one thing that separates our work here from a generic glass contractor is how we plan for the town’s historic-review corridor and seismic settling. Most Mr-Glass failures we fix in San Juan Bautista trace back to two local realities: an out-of-plumb opening in an older adobe or wood-frame home, or seals that gave out after a few fog-wet winters and dry summers. Call (866) 505-5254 and we’ll tell you what the house needs, not what you think it needs.
Why San Juan Bautista Residents Choose Us for Mr-Glass Service
We work on Mr-Glass shower and glass enclosure projects across San Juan Bautista constantly, from frameless walk-in installs to tub-to-shower conversions, so we know how their hardware, glass thicknesses, and seal systems actually behave here. Noel Cabrera, our owner, grew up in the Westlake district of Daly City and trained in construction technology at City College of San Francisco, so he reads framing and settlement problems before they become glass problems. That matters in a town where half the homes predate modern framing standards.
We’re an independent Mr-Glass service provider. That means we’re not affiliated with, authorized by, or endorsed by Mr-Glass, and we don’t pretend otherwise. What we do offer is OEM-compatible parts knowledge, honest repair-versus-replace guidance, and a full-scope general contracting team behind every shower enclosure job.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Juan Bautista
- Binding semi-frameless pivot doors. When the floor or wall framing on an older San Juan Bautista home has settled, the pivot door drifts out of square and the latch stops engaging. We re-anchor the hinges and shim the opening, then install OEM rollers so the door swings cleanly.
- Uneven gaps on frameless enclosures. Frameless Mr-Glass panels installed against out-of-plumb adobe-era or wood-frame walls show tapered gaps and water leaks at the return panel. We flash and shim the wall before the glass goes back in, not after the leak shows up.
- Cracked or hardening seals and sweeps. San Juan Bautista’s cool wet winters followed by dry warm summers cause stock Mr-Glass sliding door seals to harden and split, letting water track onto the bathroom floor and eventually the subfloor. We replace them with OEM sweeps matched to the original profile.
- Loose anchors and rollers on heavier doors. Cheap builder-grade hardware loosens over time, and because the San Andreas Fault runs directly through this area, seismic movement accelerates that loosening. We swap in quality-rated anchors and OEM rollers before the glass starts chattering.
- Glass panels that no longer align after retrofit work. When a foundation gets bolted or a wall gets reframed as part of a seismic upgrade, existing Mr-Glass enclosures often need repositioning. We handle that in coordination with the retrofit, so the enclosure stays square through the structural work.
Mr-Glass Service in San Juan Bautista: What Local Conditions Mean for Your Equipment
Because San Juan Bautista sits in a state historic park downtown, even a bathroom or shower upgrade near the mission corridor can trigger design review and materials-compatibility expectations. That’s not a hurdle you’ll find across the county line in Hollister or Mr-Glass service in Gilroy. We scope Mr-Glass glass and trim selections early rather than after demolition, so the finishes and panel profiles fit the review board’s expectations and the original opening. On an older single-family home near the mission corridor, our crew replaced a binding Mr-Glass semi-frameless pivot shower door after finding the framing had settled out of plumb. We re-squared and shimmed the opening, flashed the return, and installed new OEM rollers and sweeps so the door now closes cleanly and the floor stays dry. That’s the local version of shower-door service: plan for the review, fix the framing, then make the glass perform.
Mr-Glass Models & Products We Service in San Juan Bautista
Our crews work on the full Mr-Glass residential line: frameless sliding shower door systems, semi-frameless pivot shower doors, Neo-Angle corner shower enclosures, and fixed glass tub-to-shower panels. We use OEM Mr-Glass replacement rollers, hinges, seals, and handle hardware where available to keep fit and warranty-adjacent specs intact. We’ll switch to a quality aftermarket part only when OEM is discontinued and the substitute meets the same load rating. For San Juan Bautista’s older homes, we often keep the original glass and reuse it if the panel is sound, replacing only the hardware and seals that have failed.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Juan Bautista
What you’ll pay depends on whether we’re repairing hardware, replacing glass, or converting a tub to a walk-in shower against an adobe-era wall that needs shimming. Here are the numbers we work from in this market:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Every estimate is free and line-itemed, so you’ll see exactly where the money goes before we touch a wall. Call (866) 505-5254 for an exact quote on your San Juan Bautista project.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and know this community well, and we also offer Las Lomas Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Juan Bautista
Yes. We use OEM Mr-Glass replacement rollers, hinges, seals, and handle hardware wherever they’re available, because those parts maintain the fit and function the manufacturer designed. When OEM is discontinued, we only use an aftermarket part that meets the same load rating, and we’ll tell you before we install it.
No. We are an independent contractor and not affiliated with, authorized by, or endorsed by Mr-Glass. Our crew has been working on Mr-Glass shower enclosures in San Juan Bautista and surrounding areas, including Mr-Glass repair in Prunedale, for years purely through hands-on experience with their product lines.
Most hardware repairs, seal replacements, and glass swaps finish the same day. If your San Juan Bautista home needs framing shimming, wall flashing, or historic-review coordination before the glass goes back in, the project typically extends by a day or two. We’ll lay out the timeline during the free estimate.
We service Mr-Glass frameless sliding shower door systems, semi-frameless pivot shower doors, Neo-Angle corner shower enclosures, and fixed glass tub-to-shower panels. If you’re not sure which line you have, send us a photo and we’ll identify it before the visit.
Hardware-only repairs and seal replacements usually land in the low hundreds, while full tub-to-shower conversions on older San Juan Bautista homes run $3,500 to $10,000 depending on whether the wall needs structural work. Call (866) 505-5254 for an exact quote – estimates are free.
Service Areas Near San Juan Bautista
We serve San Juan Bautista and the surrounding communities, including Daly City, Broadmoor, Colma, and Brisbane. You can learn more about our Mr-Glass sales & service work or see our broader San Juan Bautista service area coverage. Down the coast we also handle Mr-Glass service in Silver Lakes and, beyond that, Mr-Glass service in Piñon Hills.
Book Your Mr-Glass Service in San Juan Bautista Today
Tell us what the house needs, not what you think it needs – then we’ll figure out the right fix. Call (866) 505-5254 to schedule your free estimate with Noel Cabrera and the Daly City Construction team.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Juan Bautista and the surrounding area.