Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bruno, CA | Daly City Construction
We’re Daly City Construction, an independent crew that installs and repairs CGI windows, doors, and sliding glass systems throughout San Bruno. We’re not a manufacturer-authorized dealer, which means we work for you, not the brand. One thing makes CGI work here different from anywhere else: the 2010 Crestmoor Canyon pipeline explosion rebuilt a chunk of this city, so we’re often matching new CGI units against permits and records from two different building eras. Call (866) 505-5254 for a free estimate.
Why San Bruno Residents Choose Us for CGI Service
Our crew has spent years pulling CGI units out of San Bruno homes, from Crestmoor rebuilds to hillside ranchers off San Bruno Avenue, and we’re also the San Bruno General Contractor locals call for lasting fixes. We know which Series 900 vinyl windows fog up first on a west-facing wall and which sliding door tracks corrode fastest when marine air pushes through the Gap. That pattern-matching comes from thousands of local installs, not a catalog. Noel Cabrera, our owner, grew up in Daly City’s Westlake tract where fog-weathered homes were the norm, and he built his career on the kind of moisture and structural fixes San Bruno demands. We stock OEM CGI rollers, locks, and weatherstripping locally so we’re not waiting on a warehouse in another state when your slider sticks.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bruno
- Corroded sliding door tracks on hillside homes. The marine layer that rolls over San Bruno’s west side leaves constant condensation on CGI Series 5000 and 6000 slider tracks, especially on homes facing the ocean. We clean, treat, and replace the track components, swapping in OEM rollers so the door glides instead of grinding.
- Water staining around window frames in 1950s tract homes. Wind-driven mist gets behind CGI window and door frames when the original flashing was never installed right. We see this all over the flats east of El Camino Real, where stucco-and-wood-frame ranchers from the 1940s and 1950s still have their original rough openings. We re-flash and seal every opening properly.
- Failed vinyl window seals on foggy slopes. CGI Series 900 and 1300 windows hold up well, but San Bruno’s thermal cycling, cool nights, then foggy mornings, then sun, stresses the seal between panes. Once that seal goes, you get drafts and fogging you can’t wipe away. We replace sashes or full units depending on how far the failure spread.
- Rusted entry door hardware near Crestmoor Canyon. North-facing exposures near the canyon hold fog longer than anywhere else in San Bruno, and that damp air eats CGI Series 100 and 200 entry door hinges and locksets faster than homeowners expect. We install corrosion-resistant hardware and adjust the door so it closes tight against the weatherstripping.
- Improperly flashed replacement windows from earlier work. We regularly find CGI windows installed by other crews with no peel-and-stick membrane behind the flange, so moisture wicks into the sheathing. By the time the homeowner sees paint bubbling or drywall staining, the framing needs inspection. We open it up, assess, and fix it properly.
CGI Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno’s Crestmoor neighborhood got largely rebuilt after the 2010 PG&E pipeline explosion, so when we do CGI work there, we’re often dealing with two sets of records, unlike our CGI service in Millbrae where the housing stock is more uniform. A home might have a 2012 rebuild date on its current permit history, but the underlying lot and parts of the original foundation trace back to a 1950s tract. That matters for window and door replacement because the rough openings, header sizes, and flashing details may not match what the new construction documents say. We verify records against what we actually see when we open a wall. On one Crestmoor Canyon rebuild, we replaced CGI Series 900 vinyl windows in a 2012 home where the original units had failed due to improper flashing on the fog-exposed west wall. We re-flashed every opening with peel-and-stick membrane and used stainless-steel fasteners, then installed new CGI sliders with upgraded weatherstripping. The homeowner reported no more drafts or moisture issues through the following winter. That’s the kind of attention San Bruno’s mixed stock requires, and it’s why generic CGI service doesn’t cut it here.
CGI Models & Products We Service in San Bruno
We work on the full CGI residential line: Sliding Glass Doors in Series 5000 and 6000, Vinyl Windows in Series 900 and 1300, Patio Doors in Series 700 and 800, and Entry Doors in Series 100 and 200. For critical components, rollers, locks, weatherstripping, we use OEM CGI parts to keep the fit and function the way the manufacturer intended. For non-structural items where a quality aftermarket equivalent does the same job at a better price, we’ll tell you that too. We carry common CGI service parts in our local stock so most San Bruno service calls don’t wait on shipping. If you need help choosing between a repair and a replacement, our CGI sales & service team walks you through the tradeoffs.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bruno
What you pay depends on what we find when we open the wall or pull the door. A simple roller swap on a Series 6000 slider runs far less than a full re-flash and sash replacement on a fog-battered hillside window. Here are the ranges we quote for common San Bruno projects:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
Every estimate is free and written as a line-item scope, so you know exactly what materials and labor go into the number. Call (866) 505-5254 and we’ll schedule a walkthrough.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bruno
Impact windows aren’t just about wildfire or hurricane zones. In San Bruno, wind-driven debris off the coastal hills and the occasional severe storm that rips through the Gap make impact-rated CGI windows a practical upgrade for many west-side homes. If your house sits exposed on a slope, the extra structural strength also reduces frame flex and seal stress. Call (866) 505-5254 and we’ll assess your exposure and give you a straight answer on whether the cost makes sense for your location.
The fog itself doesn’t hurt the glass, but the moisture cycle it creates is hard on seals and frames. Mar air condenses on cold window edges overnight, then the sun burns it off in the morning, and that repeated wet-dry cycle is what causes seals to fail early and tracks to corrode. West-facing and north-facing elevations near Crestmoor Canyon get the worst of it. Proper flashing, stainless fasteners, and upgraded weatherstripping make the difference between a 10-year window and a 25-year window here.
Most sticking or grinding CGI sliders just need new rollers, track cleaning, and adjustment. If the track itself is corroded or the frame flexed enough to break the seal, we’ll tell you straight that a patch won’t hold. We’re independent, so we have no incentive to push a full replacement when a $200 roller job fixes the problem. But when corrosion is widespread or the door binds structurally, replacement is the honest call.
A standard single-story window replacement usually runs one to two days from tear-out to finish, depending on how many openings we’re doing and what we find in the walls. If re-flashing is needed or framing repair shows up once we open the rough opening, it adds time. We keep our San Bruno schedule tight because we stock common CGI parts locally. Reach (866) 505-5254 for a firm timeline based on your specific project.
Yes. San Bruno’s building department requires permits for window and door replacements that change rough openings or structural headers, and we handle the paperwork as part of the job. The Crestmoor rebuild era has made the city more particular about record-keeping, so we make sure your permit trail is clean before we start. It protects you when you sell.
Service Areas Near San Bruno
We serve San Bruno and the surrounding Peninsula communities. If you’re in Daly City, Broadmoor, Colma, Brisbane, or the Visitacion Valley side of San Francisco, we cover you. Our San Bruno service area page has the full list. For coastal folks, we also run CGI service in Pacifica and CGI service in Chinatown.
Book Your CGI Service in San Bruno Today
Tell me what the house needs, not what you think it needs, then we’ll figure out the right fix. Call (866) 505-5254 to schedule your free estimate in San Bruno. We’ll come out, look at the openings, and give you a written line-item quote.
Written by Noel Cabrera, Owner at Daly City Construction, serving San Bruno, the Peninsula, and our CGI service in Brisbane clients with independent CGI installation and repair.