Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Las Lomas, CA | Daly City Construction
We provide independent CGI cabinet installation, refacing, and repair across Las Lomas, and the thing that sets our work apart here is simple: we know how CGI boxes fail in damp, pre-code Pajaro Valley houses before we ever open a wall. Daly City Construction is not a CGI dealer and we don’t claim any manufacturer authorization. What we are is a licensed general contractor that has pulled enough swollen particleboard boxes out of Las Lomas kitchens to know when a repair beats a replacement, and when it doesn’t. Call (866) 505-5254 for a straight answer and a free estimate.
Why Las Lomas Residents Choose Us for CGI Service
Most cabinet installers look at a box, measure it, and hang it. That works fine in a new tract house with square walls and a vapor barrier under the slab. It does not work in a 1940s farmhouse off Las Lomas Drive where the crawlspace breathes damp air eight months a year and the west wall hasn’t been truly dry since the Nixon administration. Our crew has worked CGI product in the Watsonville area long enough to know the difference. Noel Cabrera grew up in Daly City’s Westlake district watching his uncle re-frame a garage, trained in construction technology at City College of San Francisco, and spent years on residential jobs across San Mateo and San Francisco counties before hanging cabinets in rural Santa Cruz County. That background matters when the question isn’t “which hinge?” but “is this wall moving, and if so, how much?” We bring that lens to every CGI job in Las Lomas, and we’ll tell you what the house needs, not what you think it needs – then we’ll figure out the right fix.
Styles & brands we work with
Common CGI Construction Problems We Solve in Las Lomas
- Swollen and delaminating cabinet boxes. CGI’s ready-to-assemble lines use particleboard and MDF box construction, which works fine in a dry, conditioned kitchen. In Las Lomas, where a coastal-influenced climate pushes damp air under older farmhouses for months at a stretch, those boxes wick moisture up from the slab or crawlspace. The toe kick and bottom panel go first, often before anything shows on the door fronts.
- Binding doors and drawers on moving walls. Pre-code and owner-built structures settle. A 70-year-old house on a farm lot doesn’t always have a perfectly plumb wall behind the cabinet run. When the framing shifts seasonally, the reveals on CGI doors and drawer fronts go out, so drawers catch and doors won’t sit flush no matter how many times you adjust the hinges.
- Stripped hinge and slide screws. Once particleboard has been damp, even briefly, the screw holes lose their grip. Hinges sag, drawer slides pull loose, and tightening the screws just spins them. We see this constantly in older Las Lomas kitchens where a cabinet base has absorbed moisture for years before the problem became visible.
- Reface panels peeling on north-facing walls. The coastal fog and winter rain mean some walls never fully dry. North-facing cabinet runs, especially in unheated barn or outbuilding conversions, hold enough ambient moisture that reface panels begin to blister and peel at the edges. It looks like a glue failure, but it’s really a moisture problem.
- Sagging runs on shimmed-out walls. Owner-built additions often have walls that were never truly straight to begin with. A previous installer shimmed the cabinets to look level at install, but as the framing moved, those shims shifted. The run sags in the middle, drawers bind, and the whole kitchen starts to look tired even though the boxes are only a few years old.
CGI Service in Las Lomas: What Local Conditions Mean for Your Equipment
Here’s the thing an out-of-town installer won’t know about Las Lomas: because this community is unincorporated Pajaro Valley and much of its housing is owner-built and predates current county code, a kitchen or vanity cabinet run is often the first thing to trigger a county permit and inspection on a house that has never been pulled. A homeowner calls us for cabinets, and suddenly the scope includes bringing framing, wiring, or foundation work up to current standards before the boxes can legally go in. That’s not bureaucracy – it’s the reality of rural-adjacent lots where Santa Cruz County and Amesti area water rules decide what can be built before anyone opens a design catalog. We don’t fight it. We scope the moisture and framing conditions first, then assign a CGI box layout that will actually hold up. You can’t hang a cabinet run on a wall that’s actively moving and expect the doors to close in six months. In Las Lomas, the permit question and the moisture question come before the cabinet question, every time.
CGI Models & Products We Service in Las Lomas
We work with the full CGI ready-to-assemble framed cabinetry line – shaker and slab door styles – plus CGI framed vanity cabinets and the door-and-drawer front kits used in refacing. Our parts approach is straightforward: when matching an existing run, we buy genuine CGI fronts, hinges, and slides. When the original particleboard boxes have already taken on water, we use moisture-resistant plywood replacement boxes and quality aftermarket soft-close hardware. On a damp rural lot, we lean toward replacing water-damaged boxes rather than refacing over them, and we’ll say so before quoting. The goal is a cabinet run that survives Las Lomas winters, not one that photographs well for a month. For broader CGI sales & service context, our brand page explains the product lines in more depth.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Las Lomas
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Those are Las Lomas market ranges, and what you actually pay depends on what we find when we open the wall. A clean cabinet swap on a dry, square kitchen runs lower. A pre-code farmhouse that needs framing trued, a moisture barrier installed, and rot repair before cabinets can go in runs higher. We give written line-item quotes so you can see exactly where the money goes. Call (866) 505-5254 and we’ll come look at your Las Lomas property – the estimate is free.
Serving Las Lomas, CA — Our Local Coverage Area
We’re based in the Las Lomas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Las Lomas
It often does, because Las Lomas is unincorporated Santa Cruz County and many older farmhouses have never had a permit pulled. A cabinet installation that modifies plumbing, electrical, or structural framing triggers a county review, and Pajaro Valley water and septic rules can come into play if the work touches those systems. We scope permit requirements before we quote, and we handle the paperwork as part of the project. Call (866) 505-5254 for an exact answer on your property.
The particleboard boxes are wicking moisture up from the slab or crawlspace. Las Lomas sits in the flood-prone Corralitos area near the Pajaro River, and damp winters plus morning fog mean the air under an older house rarely dries out completely. The toe kick and bottom panel delaminate first, often before any damage shows on the door faces.
Sometimes. If the boxes are dry and the run is structurally sound, refacing with CGI door-and-drawer front kits is a legitimate option. But on a damp lot where we suspect the particleboard has already absorbed moisture, we won’t reface over a compromised box – the new fronts will start failing within a season. We’ll show you what we’re seeing and recommend the fix that lasts. Call (866) 505-5254 to schedule a free inspection.
Two things, usually working together: moisture and structural movement. Unheated outbuildings hold fog and winter damp, which swells the boxes. At the same time, older barn conversions often have floors and walls that shift seasonally, throwing the reveals out so doors bind and drawers catch. It’s rarely just a hinge problem.
No. We are an independent general contractor that works with CGI products. We’re not authorized by the manufacturer and we don’t claim any partnership or warranty endorsement. What we offer is honest experience with how CGI cabinets hold up in Las Lomas conditions, plus genuine CGI parts when matching an existing run.
Service Areas Near Las Lomas
We serve Las Lomas along with the surrounding Pajaro Valley and beyond. That includes Las Lomas service area coverage for cabinet, kitchen, and full construction scopes, plus CGI service in Aromas and CGI service in Elkhorn for homeowners on neighboring rural and agricultural parcels who face the same moisture and code challenges we handle here every day.
Book Your CGI Service in Las Lomas Today
If your CGI cabinets are swelling, binding, or peeling, don’t wait until the damage spreads. Call (866) 505-5254 to schedule a free estimate. We’ll inspect the job, scope the permit situation, and give you a written quote with real numbers.
Written by Noel Cabrera, Owner at Daly City Construction, serving Las Lomas and the Pajaro Valley for years with straight answers and cabinets that stay hung.